Difference between revisions of "AEG Band Machines"

(K8)
(→‎AEG FT-Serie: Tippfehler)
(Tags: mobile edit, mobile web edit)
 
(3 intermediate revisions by one other user not shown)
Line 1: Line 1:
−
{{NavigationW}}
+
{{navigationW}}
  
−
== Geschichte ==
+
== History ==
−
Fritz Pfleumer entwickelte 1928 im Hause [[AEG]] ein Gerät, mit dem die Lautschriftträger abgespielt werden konnten. Dieses "Tonband" wurde 1932 von Eduard Schüller zu einem ersten Seriengerät weiterentwickelt. Mit Unterstützung des Berliner Kollegen Theodor Volk konnte das Gerät fertigentwickelt werden. Als große Herausforderung stellte sich der Bandlauf heraus, insbesondere beim Spulen rissen die Bänder. Dieses Problem wurde durch den Einsatz von 3 Motoren gelöst.
+
In 1928, Fritz Pfleumer developed a device at [[AEG]] that could play phonetic transcriptions. The idea came, as so often in history, from a completely different cause: He developed for the Dresden cigarette machine factory Universelle a way to apply a bronze coating to the paper mouthpiece of the cigarette. This idea led to an attempt to try the whole thing with iron dust instead of bronze - the tape under patent number DRP 54430 instead of the steel tape was born.
−
Die Entwicklung der Bänder erfolgte in Kooperation mit der [[BASF]].
 
  
−
== AEG K-Serie ==
+
In 1932, this "tape recorder" was further developed by Eduard Schüller into a first series-produced device. His development focus was on the sound head and led to the patent "Magnetizing head for longitudinal magnetization of magnetogram carriers" and was registered in December 1933. BASF]] supported the development in the direction of an improved tape on the carrier base made of synthetic material.
−
Das 1932 entwickelte Gerät wurde bis zum Jahre 1935 weiterentwickelt und auf der Funkausstellung in Berlin als erstes industriell gefertigte Spulentonbandgerät / Bandmaschine der Öffentlich vorgeführt. Leider wurden alle 4 Geräte durch einen Brand in der Ausstellungshalle zerstört, es konnte jedoch mit verbliebenen Teilen ein weiteres (fünftes) Gerät gefertigt werden.
+
 
−
Von diesem Gerät existieren keine Fotos. Im Netz tauchen Fotos auf. Diese sind jedoch Nachbauten oder Retuschen. Auch das in späteren [[telefunken|TELEFUNKEN]]-Prospekten gezeigte Gerät ist ein K2-Typ, werbewirksam als „erstes Tonbandgerät der Welt“ bezeichnet. Das "K" beziht sich auf Kofferbauweise, also ein transportables Gerät.
+
With the support of the Berlin colleague Theodor Volk, the device could be developed. The tape running turned out to be a big challenge, especially during winding the tapes broke. This problem was solved by using 3 motors. At the radio exhibition in August 1935, AEG was able to celebrate its premiere and present the world's first functioning tape recorder, the AEG Magnetophon K1.
 +
 
 +
 
 +
In the course of restructuring after the war, AEG handed over the magnetophone business to the subsidiary Telefunken on October 1, 1954.
 +
 
 +
== AEG K-series ==
 +
The 1932 developed device was further developed up to the year 1935 and on the radio exhibition in Berlin as the first industrially manufactured reel-to-reel tape recorder / tape machine of the public demonstrated. Unfortunately, all 4 devices were destroyed by a fire in the exhibition hall, however, it could be manufactured with remaining parts a further (fifth) device.
 +
There are no photos of this machine. Photos appear on the net. However, these are reproductions or retouchings. Also the device shown in later [[telefunken|TELEFUNKEN]] brochures is a K2 type, advertised as the "first tape recorder in the world". The "K" refers to the case design, i.e. a transportable device.
  
  
 
* [[AEG Magnetophon K 1|Magnetophon K1]]
 
* [[AEG Magnetophon K 1|Magnetophon K1]]
 
* [[AEG Magnetophon K 2|Magnetophon K2]]
 
* [[AEG Magnetophon K 2|Magnetophon K2]]
−
* [[AEG Magnetophon K 3|Magnetophon K3]]
+
* [[AEG Magnetophone K 3|Magnetophone K3]]
−
* [[AEG Magnetophon K 4|Magnetophon K4]]
+
* [[AEG Magnetophone K 4|Magnetophone K4]]
−
* [[AEG Magnetophon K 4a|Magnetophon K4a]]
+
* [[AEG Magnetophone K 4a|Magnetophone K4a]]
−
* [[AEG Magnetophon K 5|Magnetophon K5]]
+
* [[AEG Magnetophone K 5|Magnetophone K5]]
−
* [[AEG Magnetophon K 6|Magnetophon K6]]
+
* [[AEG Magnetophone K 6|Magnetophone K6]]
−
* [[AEG Tonschreiber B2|Tonschreiber B2]]
+
* [[AEG Sound Recorder B2|Sound Recorder B2]]
−
* [[AEG Magnetophon K 7|Magnetophon K7]]
+
* [[AEG Magnetophone K 7|Magnetophone K7]]
−
* [[AEG Magnetophon K8|Magnetophon K8]]
+
* [[AEG Magnetophone K8|Magnetophone K8]]
 +
* [[AEG Magnetophone K9|Magnetophone K9]]
  
−
== AEG FT-Serie ==
+
== AEG FT series ==
−
Die Geräte wurden auch als FT-Gerät angeboten. Der Unterschied liegt im Gehäuse: das FT-Gerät wurde in ein dekoratives Holzgehäuse eingebaut und war für den stationären, also feststehenden Betrieb gedacht. Ein Unterschied ist auch die abgesetzte Bedieneinheit, heute würde man Fernbedienung (Geber) sagen. Während in den Koffergeräten die Knöpfe zum Start / Stopp etc. im Gerät integriert waren, wurde bei der FT-Serie eine abgesetzte Bakeliteinheit mitgeliefert. In dieser befanden sich in etwas gefälligerem Design die kabelgebundenen Bedienknöpfe. Zusätzlich wird über ein Potentiometer am Gerät die ungefähre Bandposition an ein Voltmeter übermittelt, so dass man an der Bedieneinheit auch den Fortschritt des Bandlaufes verfolgen kann (quasi ein elektrischen Zählwerk).
+
The devices were also offered as FT-devices. The difference is in the case: the FT-unit was built into a decorative wooden case and was intended for stationary, i.e. fixed operation. A difference is also the remote control unit, today one would say remote control (encoder). While the buttons for start/stop etc. were integrated in the case, the FT series came with a separate bakelite unit. In this unit the wired control buttons were located in a more pleasing design. In addition, the approximate tape position is transmitted to a voltmeter via a potentiometer on the unit, so that the progress of the tape run can also be tracked on the control unit (a kind of electrical counter).
  
−
Zielgruppe waren die neuen Rundfunkanstalten aber auch Betreiber von Veranstaltungssälen zur Aufnahme von Reden aller Art oder Theaterstücken als Hörspiel. Auch eine Diktierfunktion ist denkbar, aber aufgrund des Preis-Leistungsverhältnis eher unwahrscheinlich.
+
The target group was the new broadcasting companies, but also operators of event halls for recording speeches of all kinds or plays as radio plays. A dictation function is also conceivable, but rather unlikely due to the price-performance ratio.
  
  
  
−
[[Kategorie:Gerätedatenbank]]
+
[[Category:Device database]]
−
[[en:Telefunken Reel-to-reel tape recorder]]
+
[[en:Telefunken reel-to-reel tape recorder]]

Latest revision as of 15:35, 7 April 2021

History[edit]

In 1928, Fritz Pfleumer developed a device at AEG that could play phonetic transcriptions. The idea came, as so often in history, from a completely different cause: He developed for the Dresden cigarette machine factory Universelle a way to apply a bronze coating to the paper mouthpiece of the cigarette. This idea led to an attempt to try the whole thing with iron dust instead of bronze - the tape under patent number DRP 54430 instead of the steel tape was born.

In 1932, this "tape recorder" was further developed by Eduard Schüller into a first series-produced device. His development focus was on the sound head and led to the patent "Magnetizing head for longitudinal magnetization of magnetogram carriers" and was registered in December 1933. BASF]] supported the development in the direction of an improved tape on the carrier base made of synthetic material.

With the support of the Berlin colleague Theodor Volk, the device could be developed. The tape running turned out to be a big challenge, especially during winding the tapes broke. This problem was solved by using 3 motors. At the radio exhibition in August 1935, AEG was able to celebrate its premiere and present the world's first functioning tape recorder, the AEG Magnetophon K1.


In the course of restructuring after the war, AEG handed over the magnetophone business to the subsidiary Telefunken on October 1, 1954.

AEG K-series[edit]

The 1932 developed device was further developed up to the year 1935 and on the radio exhibition in Berlin as the first industrially manufactured reel-to-reel tape recorder / tape machine of the public demonstrated. Unfortunately, all 4 devices were destroyed by a fire in the exhibition hall, however, it could be manufactured with remaining parts a further (fifth) device. There are no photos of this machine. Photos appear on the net. However, these are reproductions or retouchings. Also the device shown in later TELEFUNKEN brochures is a K2 type, advertised as the "first tape recorder in the world". The "K" refers to the case design, i.e. a transportable device.


AEG FT series[edit]

The devices were also offered as FT-devices. The difference is in the case: the FT-unit was built into a decorative wooden case and was intended for stationary, i.e. fixed operation. A difference is also the remote control unit, today one would say remote control (encoder). While the buttons for start/stop etc. were integrated in the case, the FT series came with a separate bakelite unit. In this unit the wired control buttons were located in a more pleasing design. In addition, the approximate tape position is transmitted to a voltmeter via a potentiometer on the unit, so that the progress of the tape run can also be tracked on the control unit (a kind of electrical counter).

The target group was the new broadcasting companies, but also operators of event halls for recording speeches of all kinds or plays as radio plays. A dictation function is also conceivable, but rather unlikely due to the price-performance ratio.

Retrieved from "https://hifi-wiki.com/index.php?title=AEG_Band_Machines&oldid=275993"