Difference between revisions of "Marantz 5025"
m |
|||
| (11 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
| − | {{ | + | __NOTOC__ |
| − | + | == Data == | |
| − | + | {{navigation}} | |
| + | '''General''' | ||
| + | * Manufacturer: [[Marantz]] | ||
| + | * Model: 5025 | ||
| + | * Type: Cassette Tape Deck | ||
| + | * Years of manufacture: 1977 - 1979 | ||
| + | * Made in: Japan | ||
| + | * Color: Silver (Standard), Black (Rare), Wooden Case WC-121 optional | ||
| + | * Remote control: no | ||
| + | * Power consumption: 11 watts | ||
| + | * Original price approx.: 800 DM | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | '''Technical data''' | |
| − | + | ||
| + | [[File:Marantz 5010-5025-Daten.jpg]] | ||
| + | |||
| + | |||
| + | '''Special Features''' | ||
| + | * Peak Limiter (level limiter for recording). | ||
| + | * Illuminated cassette compartment | ||
| + | * 3-digit mechanical tape counter with reset button | ||
| + | |||
| + | |||
| + | == Remarks == | ||
| + | * Other models in the same series: | ||
| + | * [[Marantz 1820]] | ||
| + | * [[Marantz 5010]] | ||
| + | * [[Marantz 5010B]] | ||
| + | * [[Marantz 5025]] | ||
| + | * [[Marantz 5025B]] | ||
| + | * [[Marantz 5030]] | ||
| + | |||
| + | |||
| + | * The 5025 / 5025B is merely a slightly upgraded 5010 or 5010B. Technically and mechanically, the devices are virtually identical. | ||
| + | |||
| + | |||
| + | * The 5025 differs from the "smaller" models by: | ||
| + | **- a switchable zero stop function of the totalizer. | ||
| + | **- peak level indicator LEDs for peak value display | ||
| + | **- separate controls for mic L + R and line L + R (smaller, coaxial controls) with a master level control | ||
| + | **- Slightly lower synchronization fluctuations (0.11 % compared to 0.12 % for the 5010) | ||
| + | |||
| + | * The 'B' and 'non-B' models differ not only in the virtually non-functional hex screws in the front panel, but mainly in width. "B" models are 416mm wide to fit Marantz separate tuners/amplifiers, and "non-B" models are 440mm wide to fit receivers. | ||
| + | * These were screws that were once intended to mount the unit chassis (without the lid) in an EIA rack. The Marantz units had -not quite coincidentally- a width (440 mm front outside, 400 mm chassis) that was compatible with certain EIA 19 inch audio racks. These rack screws were then omitted from the B models. | ||
| + | |||
| + | |||
| + | == Pictures == | ||
| + | * Extract from brochure: Marantz 5010, 5025, 5030 | ||
| + | [[File:Marantz 5010-5025-5030-Prospekt-2.jpg]] | ||
| + | |||
| + | |||
| + | == Reports == | ||
| + | |||
| + | |||
| + | == Links == | ||
| + | |||
| + | |||
| + | [[Category:Cassette decks]] | ||
Latest revision as of 18:09, 22 March 2020
Data[edit]
General
- Manufacturer: Marantz
- Model: 5025
- Type: Cassette Tape Deck
- Years of manufacture: 1977 - 1979
- Made in: Japan
- Color: Silver (Standard), Black (Rare), Wooden Case WC-121 optional
- Remote control: no
- Power consumption: 11 watts
- Original price approx.: 800 DM
Technical data
Special Features
- Peak Limiter (level limiter for recording).
- Illuminated cassette compartment
- 3-digit mechanical tape counter with reset button
Remarks[edit]
- Other models in the same series:
- Marantz 1820
- Marantz 5010
- Marantz 5010B
- Marantz 5025
- Marantz 5025B
- Marantz 5030
- The 5025 / 5025B is merely a slightly upgraded 5010 or 5010B. Technically and mechanically, the devices are virtually identical.
- The 5025 differs from the "smaller" models by:
- - a switchable zero stop function of the totalizer.
- - peak level indicator LEDs for peak value display
- - separate controls for mic L + R and line L + R (smaller, coaxial controls) with a master level control
- - Slightly lower synchronization fluctuations (0.11 % compared to 0.12 % for the 5010)
- The 'B' and 'non-B' models differ not only in the virtually non-functional hex screws in the front panel, but mainly in width. "B" models are 416mm wide to fit Marantz separate tuners/amplifiers, and "non-B" models are 440mm wide to fit receivers.
- These were screws that were once intended to mount the unit chassis (without the lid) in an EIA rack. The Marantz units had -not quite coincidentally- a width (440 mm front outside, 400 mm chassis) that was compatible with certain EIA 19 inch audio racks. These rack screws were then omitted from the B models.
Pictures[edit]
- Extract from brochure: Marantz 5010, 5025, 5030
