Marantz 5010B
Data[edit]
General
- Manufacturer: Marantz
- Model: 5010 B
- Type: Cassette Tape Deck
- Year of manufacture: 1978
- Made in: Japan
- Color: Silver
- Remote control: no
- Power consumption: 11 W
- Dimensions: 440 x 146 x 297 mm (WxHxD)
- Weight: 6.7 kg
- Original price approx.: 270 US$, 800 DM
Connections
- Number of inputs: 2
- Line in (Chinch + DIN at the back)
- Mic in (2 x 6.35 mm at the front panel)
- Number of outputs: 2
- Line out (Chinch + DIN)
- Headphones (6.35 mm at the front)
Technical data
- Sound heads: 2 (1 erase head, 1 A/W head)
- Motors: 1 DC servo
- Synchronous speed variations: 0.12% (5010), 0.11 % (5025)
- Belt types: Norm / Cr2O / FeCr
- Frequency response: 40 Hz - 14KHz (Standard), 40 Hz - 16 KHz (Cr2O), 40 Hz - 17 KHz (FeCr) each +/- 2.5 dB
- Distortion factor: 1 % (standard), 1.8 % (Cr2O + FeCr)
- Rewind time: 105 s (C-60)
- Signal to noise ratio:
- Auto reverse: no
- Title search: no
- Dolby: Dolby B
- MPX filter: yes (switch on rear panel)
- Fader: no
- Pitch control: no
- CD synchro recording: no
Special Features
- Peak Limiter (level limiter for recording)
- Illuminated cassette compartment
- 3-digit mechanical tape counter with reset button
Remarks[edit]
Other models in the same series:
The 5010B is technically identical to the 5010, the only difference being the lack of hex screws in the front, which should give the 5010 the same 'look' as the receivers and amplifiers, but are otherwise functionless.
The 5025 has three controls: Mic L + R / Line L + R (two smaller coaxial knobs left and center) and Master Level (larger knob, right). In addition, the 5025 has Peak Level Indicator LEDs. Mechanically and technically it is identical to the 5010 and 5010B. The tape counter of the 5025 has a memory function (zero stop - additional switch below the counter).
Pictures[edit]
