Difference between revisions of "Marantz 5025"
| (5 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Marantz]] |
| − | * | + | * Model: 5025 |
| − | * | + | * Type: Cassette Tape Deck |
| − | * | + | * Years of manufacture: 1977 - 1979 |
| − | * | + | * Made in: Japan |
| − | * | + | * Color: Silver (Standard), Black (Rare), Wooden Case WC-121 optional |
| − | * | + | * Remote control: no |
| − | * | + | * Power consumption: 11 watts |
| − | * | + | * Original price approx.: 800 DM |
| − | |||
| − | |||
| − | ''' | + | '''Technical data''' |
| − | [[ | + | [[File:Marantz 5010-5025-Daten.jpg]] |
| − | == | + | '''Special Features''' |
| − | * | + | * Peak Limiter (level limiter for recording). |
| + | * Illuminated cassette compartment | ||
| + | * 3-digit mechanical tape counter with reset button | ||
| + | |||
| + | |||
| + | == Remarks == | ||
| + | * Other models in the same series: | ||
| + | * [[Marantz 1820]] | ||
* [[Marantz 5010]] | * [[Marantz 5010]] | ||
* [[Marantz 5010B]] | * [[Marantz 5010B]] | ||
| Line 30: | Line 35: | ||
| − | * | + | * The 5025 / 5025B is merely a slightly upgraded 5010 or 5010B. Technically and mechanically, the devices are virtually identical. |
| − | * | + | * The 5025 differs from the "smaller" models by: |
| − | **- | + | **- a switchable zero stop function of the totalizer. |
| − | **- | + | **- peak level indicator LEDs for peak value display |
| − | **- | + | **- separate controls for mic L + R and line L + R (smaller, coaxial controls) with a master level control |
| − | **- | + | **- Slightly lower synchronization fluctuations (0.11 % compared to 0.12 % for the 5010) |
| − | * | + | * The 'B' and 'non-B' models differ not only in the virtually non-functional hex screws in the front panel, but mainly in width. "B" models are 416mm wide to fit Marantz separate tuners/amplifiers, and "non-B" models are 440mm wide to fit receivers. |
| − | * | + | * These were screws that were once intended to mount the unit chassis (without the lid) in an EIA rack. The Marantz units had -not quite coincidentally- a width (440 mm front outside, 400 mm chassis) that was compatible with certain EIA 19 inch audio racks. These rack screws were then omitted from the B models. |
| − | == | + | == Pictures == |
| − | * | + | * Extract from brochure: Marantz 5010, 5025, 5030 |
| − | [[ | + | [[File:Marantz 5010-5025-5030-Prospekt-2.jpg]] |
| − | == | + | == Reports == |
| Line 54: | Line 59: | ||
| − | [[ | + | [[Category:Cassette decks]] |
Latest revision as of 18:09, 22 March 2020
Data[edit]
General
- Manufacturer: Marantz
- Model: 5025
- Type: Cassette Tape Deck
- Years of manufacture: 1977 - 1979
- Made in: Japan
- Color: Silver (Standard), Black (Rare), Wooden Case WC-121 optional
- Remote control: no
- Power consumption: 11 watts
- Original price approx.: 800 DM
Technical data
Special Features
- Peak Limiter (level limiter for recording).
- Illuminated cassette compartment
- 3-digit mechanical tape counter with reset button
Remarks[edit]
- Other models in the same series:
- Marantz 1820
- Marantz 5010
- Marantz 5010B
- Marantz 5025
- Marantz 5025B
- Marantz 5030
- The 5025 / 5025B is merely a slightly upgraded 5010 or 5010B. Technically and mechanically, the devices are virtually identical.
- The 5025 differs from the "smaller" models by:
- - a switchable zero stop function of the totalizer.
- - peak level indicator LEDs for peak value display
- - separate controls for mic L + R and line L + R (smaller, coaxial controls) with a master level control
- - Slightly lower synchronization fluctuations (0.11 % compared to 0.12 % for the 5010)
- The 'B' and 'non-B' models differ not only in the virtually non-functional hex screws in the front panel, but mainly in width. "B" models are 416mm wide to fit Marantz separate tuners/amplifiers, and "non-B" models are 440mm wide to fit receivers.
- These were screws that were once intended to mount the unit chassis (without the lid) in an EIA rack. The Marantz units had -not quite coincidentally- a width (440 mm front outside, 400 mm chassis) that was compatible with certain EIA 19 inch audio racks. These rack screws were then omitted from the B models.
Pictures[edit]
- Extract from brochure: Marantz 5010, 5025, 5030
