Kenwood KA-8006

Data

General

  • Manufacturer: Kenwood
  • Model: KA-8006 (US version)
  • Type: Integrated amplifier
  • Years of manufacture: 1974 - 1976
  • Made in: Japan
  • Color: Silver, wooden side panels
  • Power consumption:
  • Dimensions (WxHxD): 435 x 157 x 300 mm
  • Weight: 13,5 Kg
  • Original price approx.: 95'000 Yen (Japan, 1974) (this corresponds to about 1'450 DM, but as far as known, these amplifiers were not sold in Europe)


Connections

  • Number of inputs:
    • Input sensitivity:
    • Phono 1 MM: 2.5mV, switchable 30 kOhm, 50 kOhm, max. 250 mV.
    • Phono 2 MM: 2.5mV, 50 kOhm, max. 250 mV
    • Microphone: 2.5mV, 50 kOhm
    • Tuner: 150mV, 50 kOhm
    • AUX 1, 2: 150mV, 50 kOhm
    • Tape Play 1, 2: 150mV, 50 kOhm
    • Tape Play DIN 1, 2:
    • Main In: 1 V, 50 kOhm
  • Number of Outputs:
    • Outputs:
    • Tape Rec 1, 2: 150mV, 50 kOhm
    • Tape Rec DIN 1, 2: 40mV, 70 kOhm
    • Pre-Out: 1 V, 100 Ohm
    • Headphones: 4 - 16 Ohm
    • Connections for 3 speaker pairs


Technical Data

  • Continuous power (at distortion factor)
    • 8 Ohm: 2x 70W (RMS, 20Hz...20Khz)
    • 4 Ohm:
  • dynamic power
    • 8 Ohm:
    • 4 Ohm:
  • Total harmonic distortion: 0.2% THD at 8 Ohm
  • Attenuation factor: 30 at 8 Ohm
  • Frequency response: 20 - 20'000 Hz
  • Signal to noise ratio:
    • Phono 1,2: 76 dB
    • Microphone: 76 dB
    • Tuner: 90 dB
    • AUX 1, 2: 90 dB
    • Tape Play A, B: 90 dB
  • Tone control
    • Bass:
      • 200Hz : ± 10 dB at 50 Hz
      • 400Hz : ± 10 dB at 100 Hz

Treble:

      • 3Khz : ± 10 dB at 3 kHz
      • 6Khz : ± 10 dB at 10 kHz
  • Loudness: +8dB at 100Hz, +3dB at 10kHz
  • High Filter: 6 dB/oct. at 7 kHz / 12 kHz
  • Low Filter: 12 dB/oct. at 20 Hz / 40 Hz
  • Low Filter (Subsonic): +18dB/oct. at 20Hz

Attenuator: 0 dB, - 20 dB


Special Features

  • 2 microphone inputs on the front panel
  • Tape dubbing


Notes


Pictures

  • Image: Kenwood KA-8006

Datei:Kenwood KA-8006-1.jpg


Reports

Links