Kenwood KA-9006
Data[edit]
General
- Manufacturer: Kenwood
- Model: KA-9006 (US version)
- Type: Integrated amplifier
- Years of manufacture: 1974 - 1976
- Made in: Japan
- Color: Silver, wooden side panels
- Power consumption:
- Dimensions (WxHxD): 435 x 157 x 300 mm
- Weight: 13,5 Kg
- Original price approx.: 120'000 Yen (Japan, 1974); (this corresponds to about 1'800 DM, but as far as known, these amplifiers were not sold in Europe)
- New price rack handles D-9: 5'000 Yen (Japan, 1974); (this corresponds to about 80 DM)
Connectors
- Number of inputs:
- Input sensitivity:
- Phono 1 MM: 2.5mV, switchable 30 kOhm, 50 kOhm, max. 250 mV.
- Phono 2 MM: 2.5mV, 50 kOhm, max. 250 mV
- Microphone: 2.5mV, 50 kOhm
- Tuner: 150mV, 50 kOhm
- AUX 1, 2: 150mV, 50 kOhm
- Tape Play 1, 2: 150mV, 50 kOhm
- Tape Play DIN 1, 2:
- Main In: 1 V, 50 kOhm
- Number of Outputs:
- Outputs:
- Tape Rec 1, 2: 150mV, 50 kOhm
- Tape Rec DIN 1, 2: 40mV, 70 kOhm
- Pre-Out: 1 V, 100 Ohm
- Headphones: 0.2 mV, 8 Ohm
- Connections for 3 speaker pairs
Technical Data
- Continuous power (at distortion factor)
- 8 Ohm: 2x 73 W (RMS, 20Hz...20Khz)
- 4 Ohm: 2x 95 W
- Dynamic power
- 8 Ohm: 2x 100 W
- 4 Ohm: 2x 150 W
- Total harmonic distortion: 0.2% THD at 8 Ohm
- Attenuation factor: 30 at 8 Ohm
- Frequency response: 6 - 45'000 Hz
- Signal to noise ratio:
- Phono 1,2: 76 dB
- Microphone: 76 dB
- Tuner: 90 dB
- AUX 1, 2: 90 dB
- Tape Play A, B: 90 dB
- Tone control
- Bass:
- 200Hz : ± 10 dB at 50 Hz
- 400Hz : ± 10 dB at 100 Hz
- Bass:
Treble:
- 3Khz : ± 10 dB at 3 kHz
- 6Khz : ± 10 dB at 10 kHz
- Loudness: +8dB at 100Hz, +3dB at 10kHz
- High Filter: 6 dB/oct. at 7 kHz / 12 kHz
- Low Filter: 12 dB/oct. at 20 Hz / 40 Hz
- Low Filter (Subsonic): +18dB/oct. at 20Hz
Attenuator: 0 dB, - 20 dB
Special Features
- 2 microphone inputs on the front panel
- Tape dubbing
Notes[edit]
Pictures[edit]
- Extract from brochure: Kenwood KA-9006 with rack handles and tuner KT-9007
