Kenwood KA-8006

Data

General

• Manufacturer: Kenwood
• Model: KA-8006 (US version)
• Type: Integrated amplifier
• Years of manufacture: 1974 - 1976
• Made in: Japan
• Color: Silver, wooden side panels
• Power consumption:
• Dimensions (WxHxD): 435 x 157 x 300 mm
• Weight: 13,5 Kg
• Original price approx.: 95'000 Yen (Japan, 1974) (this corresponds to about 1'450 DM, but as far as known, these amplifiers were not sold in Europe)

Connections

• Number of inputs:
  • Input sensitivity:
  • Phono 1 MM: 2.5mV, switchable 30 kOhm, 50 kOhm, max. 250 mV.
  • Phono 2 MM: 2.5mV, 50 kOhm, max. 250 mV
  • Microphone: 2.5mV, 50 kOhm
  • Tuner: 150mV, 50 kOhm
  • AUX 1, 2: 150mV, 50 kOhm
  • Tape Play 1, 2: 150mV, 50 kOhm
  • Tape Play DIN 1, 2:
  • Main In: 1 V, 50 kOhm
• Number of Outputs:
  • Outputs:
  • Tape Rec 1, 2: 150mV, 50 kOhm
  • Tape Rec DIN 1, 2: 40mV, 70 kOhm
  • Pre-Out: 1 V, 100 Ohm
  • Headphones: 4 - 16 Ohm
  • Connections for 3 speaker pairs

Technical Data

• Continuous power (at distortion factor)
  • 8 Ohm: 2x 70W (RMS, 20Hz...20Khz)
  • 4 Ohm:
• dynamic power
  • 8 Ohm:
  • 4 Ohm:
• Total harmonic distortion: 0.2% THD at 8 Ohm
• Attenuation factor: 30 at 8 Ohm
• Frequency response: 20 - 20'000 Hz
• Signal to noise ratio:
  • Phono 1,2: 76 dB
  • Microphone: 76 dB
  • Tuner: 90 dB
  • AUX 1, 2: 90 dB
  • Tape Play A, B: 90 dB
• Tone control
  • Bass:
    • 200Hz : ± 10 dB at 50 Hz
    • 400Hz : ± 10 dB at 100 Hz

Treble:

• • • 3Khz : ± 10 dB at 3 kHz
    • 6Khz : ± 10 dB at 10 kHz
• Loudness: +8dB at 100Hz, +3dB at 10kHz
• High Filter: 6 dB/oct. at 7 kHz / 12 kHz
• Low Filter: 12 dB/oct. at 20 Hz / 40 Hz
• Low Filter (Subsonic): +18dB/oct. at 20Hz

Attenuator: 0 dB, - 20 dB

Special Features

• 2 microphone inputs on the front panel
• Tape dubbing

Notes

• Other models in the same series:
  • KA-3006
  • KA-4006
  • KA-5006
  • KA-6006
  • KA-7006
  • KA-8006
  • KA-9006

Pictures

• Image: Kenwood KA-8006