Akai AA-6600
Data
General
- Manufacturer: Akai
- Model: AA-6600
- Type: Receiver
- Years of manufacture: 1970 - 1973
- Made in: Japan
- Color: silver / black, housing wood, walnut
- Power consumption: 150 W
- Dimensions (WxHxD): 445 x 133 x 340 mm
- Weight: 11 kg
- Original price approx.: 1'125 DM (1973)
Connections:
- Number of inputs:
- Phono MM: 3 mV, 50 kOhm
- AUX: 150 mV, 50 kOhm
- Tape Play: 200 mV, 50 kOhm
- Tape 2 Play DIN: 200 mV, 50 kOhm
- Main In: 770 mV, 100 kOhm
- Antenna: 75 Ohm, 300 Ohm
- Number of outputs:
- Tape Rec: 150 mV
Tape Rec DIN: 25 mV
- Pre-Out:
- Headphones: 8 - 16 Ohm
- 2 pairs of speakers
Technical Data
Amplifier
- Continuous power (at distortion factor)
- 8 Ohm: 2x 37.5 W, 0.8 %
- 4 Ohm:
- dynamic power
- 8 Ohm: 2x 60 W
- 4 Ohm:
- Total harmonic distortion: 0.15 % at 15 W
- Attenuation factor:
- Frequency response: 20 - 40,000 Hz, - 3 dB
- Signal-to-noise ratio:
- Phono: 60 dB
- AUX: 70 dB
- Tone control:
- Bass: ± 10 dB at 100 Hz
- Tweeter: ± 10 dB at 10 kHz
- Loudness: yes, + 6 dB at 100 Hz, + 6 dB at 10 kHz
- Low Filter (Subsonic): yes
- High Filter: yes
- Muting: yes
Tuner
- Reception: FM/MW
- Frequencies:
- FM: 88 - 108 MHz
- MW: 535 - 1605 KHz
- Input sensitivity:
- FM: 2.0µV
- MW: 150µV
- Frequency range:
- Distortion factor: 0.8
- Signal-to-noise ratio: > 65 dB
- Channel separation: > 35 dB
- selectivity: > 50 dB
- Co-wave selection: 2.0 dB
- Spurious wave selection: 34 dB
- Image frequency attenuation: > 50 dB
- IF attenuation: > 90 dB
- AM suppression: 55 dB
Special Features
- Mono / Stereo switch
- Tuning aids: Field Strength and Ratio Mid-Instrument
- FM muting
Comments
Pictures
- Image: Akai AA-6600
- Image: Akai AA-6600
- Picture: Akai AA-6600