Akai AA-8500
Data[edit]
General
- Manufacturer: Akai
- Model: AA-8500
- Type: Receiver
- Years of manufacture: 1970 - 1972
- Made in: Japan
- Color: silver, housing wood, walnut
- Power consumption: 350 W
- Dimensions (WxHxD): 487 x 165 x 346 mm
- Weight: 16 kg
- Original price approx.: 1'800 DM
Connections:
- Number of inputs:
- Phono MM: 3 mV, 50 kOhm
- AUX: 150 mV, 50 kOhm
Tape Play: 200 mV, 50 kOhm Tape Play DIN: 200 mV, 50 kOhm
- Main In: 770 mV, 100 kOhm
- Antenna: 75 Ohm, 300 Ohm
- Number of outputs:
- Tape Rec: 150 mV
Tape Rec DIN: 25 mV
- Pre-Out:
- Headphones: 8 - 16 Ohm
- 2 pairs of speakers
Technical Data
Amplifier
- Continuous power (at distortion)
8 Ohm: 2x 65 W 4 Ohm: 2x 85 W
- Dynamic power
- 8 Ohm: 2x 90 W
- 4 Ohm: 2x 120 W
- Total harmonic distortion: 0.05 % at rated power
- Attenuation factor:
- Frequency response: 20 - 50,000 Hz, - 3 dB
- Signal-to-noise ratio:
- Phono: 70 dB
- AUX: 80 dB
- Tone control:
- Bass: ± 10 dB at 100 Hz
- Tweeter: ± 10 dB at 10 kHz
- Loudness: yes, + 8 dB at 100 Hz, + 4 dB at 10 kHz
- Low Filter (Subsonic): yes, - 9 dB at 100 Hz
- High Filter: yes, - 5 dB at 10 kHz
- Muting: yes
Tuner
- Reception: FM/MW
- Frequencies:
- FM: 88 - 108 MHz
- MW: 535 - 1605 KHz
- Input sensitivity:
- FM: 2.0µV
- MW: 50µV
- Frequency range:
- Distortion factor: 0.3% (mono), 0.8% (stereo).
- Signal-to-noise ratio: 70 dB
- Channel separation: > 40 dB
- Selectivity: 65 dB
- Co-wave selection: 1.5 dB
- Spurious wave selection: 34 dB
- Image frequency attenuation: > 100 dB
- IF attenuation: > 100 dB
- AM suppression: 55 dB
Special Features
- Slider for balance, bass, tweeter
- Audio muting
- Tuning aids: Field Strength and Ratio Mid-Instrument
- FM muting
- FM AFC
- MPX Filter
Comments[edit]
Pictures[edit]
- Excerpt from brochure: Akai AA-8500
Datei:Akai AA-8000-Prospekt-2.jpg