Fisher RS-1035

Data

General

• Manufacturer: Fisher
• Model: RS-1035 Edition
• Years of manufacture: 1977 - 1979
• Made in: Japan
• Color: Silver
• Remote control: no
• Power consumption: 190 W
• Dimensions: 490 x 150 x 330 mm (WxHxD)
• Weight: 11 kg
• Original price approx.: 800 DM

Connections

• Number of inputs:
  • 1x Phono: 2 mV / 50 kOhm

2x Line In: 150 mV / 100 kOhm

• • Antenna
• Number of outputs:
  • 2x Line Out: 150 mV / 1 kOhm
  • Headphones (6.3mm jack, front)
  • 2 pairs of loudspeakers

Technical Data

Amplifier

• Continuous power (DIN)

8 Ohm: 2x 30 W 4 Ohm: 2x 40 W

• Dynamic power
  • 8 Ohm: 2x 30 W
  • 4 Ohm: 2x 50 W
• Total harmonic distortion: 0.2% (at nominal power)
• Attenuation factor:
• Frequency response:
  • 20 - 30,000 Hz (±1 dB)
  • Power bandwidth: 7 - 30,000 Hz
• Signal-to-noise ratio: (extraneous voltage)
  • Phono: 60 dB

Line In: 70 dB

• Stereo Channel Separation:
• Tone control:
  • Bass: ±10 dB at 100 Hz
  • Treble: ±10 dB at 10 kHz
• Loudness: yes
• High Filter: 5 kHz
• Low Filter (Subsonic): no
• Mute: FM Muting
• Direct/Line-Straight:

Tuner

• Reception:
• Frequencies:
  • FM: 87.5 - 108 MHz
  • MW: 515 - 1,700 kHz
• Frequency response:
• Input sensitivity:
  • FM: 1.7 µV (DIN, mono)

VHF: 4.8 µV / 18.9 dBf (IHF, stereo)

• • MW: 300 µV/m (IHF)

Distortion factor:

• • FM: 0.2% (mono), 0.4% (stereo).
  • MW: 0.3%

Signal-to-noise ratio:

• • FM: 68 / 66 dB (mono/stereo).
  • MW: 55 dB
• Channel separation:
  • FM: 40 dB
• selectivity:
  • FM: 65 dB
  • MW: 43 dB
• Equal wave selection:
  • FM: 1 dB
• Spurious wave selection:
• Image frequency attenuation:
  • FM: 56 dB

MW: 48 dB

• IF attenuation:
• AM rejection: 55 dB
• Output level:
• RDS: no
• Station memory: no

Special Features

• Record Out (6.3mm jack, front)

Remarks

• Other models in the same series:
• Fisher RS-1020
• Fisher RS-1022
• Fisher RS-1035
• Fisher RS-1052
• Fisher RS-1056
• Fisher RS-1058
• Fisher RS-1060
• Fisher RS-1080

Pictures

• Image: Fisher RS-1035