Fisher RS-1060
Data[edit]
General
- Manufacturer: Fisher
- Model: RS-1060
- Type: Receiver
- Years of manufacture: 1977 - 1979
- Made in: Japan
- Color: Silver
- Remote control: no
- Power consumption: 800 W max.
- Dimensions: 610 x 190 x 420 mm (WxHxD)
- Weight: 25.3 kg
- Original price approx.: 2'298 DM
Connections
- Number of inputs:
- 2x Phono: 2 mV / 50 kOhm
5x Line In: 150 mV / 100 kOhm
- Antenna
- Number of outputs:
- 3x Line Out: 150 mV / 1 kOhm
- 2 headphones
- 3 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power (DIN)
8 Ohm: 2x 125 W 4 Ohm: 2x 135 W
- Dynamic power
- 8 Ohm: 2x 140 W
4 Ohm: 2x 150 W
- Total harmonic distortion: 0.08% (at nominal power)
- Attenuation factor:
- Frequency response:
- 20 - 30,000 Hz (±1 dB)
- Power bandwidth: 7 - 35,000 Hz
- Signal-to-noise ratio: (extraneous voltage)
- Phono: 70 dB
Line In: 80 dB
- Stereo Channel Separation:
- Tone control:
- Bass: ±12 dB at 100 Hz
- Treble: ±12 dB at 10 kHz
- Loudness: yes
- High Filter: 5 kHz
- Low Filter (Subsonic): 30 Hz
- Mute: FM Muting
- Direct/Line-Straight: yes
Tuner
- Reception:
- Frequencies:
- FM: 87.5 - 109 MHz
- MW: 515 - 1,700 kHz
- Frequency response:
- Input sensitivity:
- FM: 1.0 µV (DIN, mono)
VHF: 4.3 µV / 17.9 dBf (IHF, stereo)
- MW: 280 µV/m (IHF)
Distortion factor:
- FM: 0.15% (mono), 0.25% (stereo).
- MW: 0.2%
Signal-to-noise ratio:
- FM: 72 / 68 dB (mono/stereo).
- MW: 65 dB
- Channel separation:
- FM: 46 dB
- selectivity:
- FM: 70 dB
- MW: 45 dB
- Equal wave selection:
- FM: 0.8 dB
- Spurious wave selection:
- Image frequency attenuation:
- FM: 100 dB
MW: 70 dB
- IF attenuation:
- AM suppression: 65 dB
Special Features
- Pre-/power stage separable
- Subsonic filter (5 Hz)
Remarks[edit]
- Other models in the same series:
- Fisher RS-1020
- Fisher RS-1022
- Fisher RS-1035
- Fisher RS-1052
- Fisher RS-1056
- Fisher RS-1058
- Fisher RS-1060
- Fisher RS-1080
Pictures[edit]
- Extract from brochure: Fisher RS-1060
