Tascam 388

Revision as of 10:38, 1 October 2019 by Hapeg2 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Data

General

  • Manufacturer: Tascam
  • Model: TASCAM STUDIO 8 (Model 388)
  • Type: 8-track tape machine with 8 channel mixer, recorder, 1/4" on 18cm reels, 19 cm/sec
  • Years of manufacture: 1984 - 1989
  • Made in: Japan
  • Color: Black
  • Dimensions (WxHxD): 837 x 219 x 641 mm
  • Weight: 38 kg
  • Original price: 9'467 DM


Technical data

MIXING PULSE

  • Each input channel has:
  • XRL balanced input Micro (-70 dBV to -35dBV).
  • 6.3 mm jack UNE input (-10 dBV)
  • MIC trim control
  • Input selector switch (MIC-UNE-RMX)
  • 6.3 mm jack additional Send/Receive
  • 3-band equalizer
    • (50 Hz-1kHz/500 Hz-5 kHz/2.5 kHz-15 kHz, +/- 12dB)
  • Overload LED indicator
  • AUX Pre/Post Switch and Send Level Control
  • EFFECT send level control
  • PGM 1 -8 & L/R summing-bar assignment switch & pan pot
  • Soft 60 mm fader


  • PROGRAM BUS (x 8):
  • ODD and EVEN Master Fader
  • PGM BUSS Input 1-8
  • RCA output jacks (-10 dBV) for each PGM summing bus


  • STEREO BUS:
  • Receives signal from input channel when one or more of the input channel L/R assignment switches are engaged.

Receives signal from the program buses or the tracks of the recorder via monitor gain and pan pots when no L/R assignment switch is operated.

  • Master fader
  • Stereo sum input (L&R)
  • Mono switch
  • XRL output jacks with balanced/unbalanced switch (+4dBm) and RCA jacks (-10 dBV)


  • AUX BUS (1 x)
  • Receives signal from channel (pre or post)
  • Master level control
  • 6.3 mm jack (OdBU) and RCA (-IOdBV) output jacks
  • AUX bus bar input


  • EFFECT SEND (x1)
  • Receives signal from channel (post)
  • Master level control
  • 6.3mm jack (OdBu) and RCA (-IOdBV) output jacks
  • Effect summing bar input


  • EFFECT RETURN (x2)
  • The TASCAM 388 has two independent EFFECT RETURN circuits.
  • The return signal coming from the 6.3 mm phone jack goes to the STEREO sums via the gain control and pan pot.


MONITOR SECTION

  • RCA MONITOR OUT jacks (-10 dBV) and 2 stereo headphone jacks
  • The monitoring signal STEREO, AUX or EFFECT is determined by the monitor selection buttons.
  • Level control effective on both MONITOR OUT and headphone jacks.
  • 100 mW + 100 mW headphone output power (80hm)


RECORDER

  • Tape: 1/4 inch, 1 mil
  • 8-track, 8-channel
  • 19 cm/s tape speed *18cm reels (7")max.
  • 3 motors, 2 heads
  • Built-in dbx noise reduction with switch for CH. 1-4 (ON/OFF), CH. 5-8 (ON/OFF) and CH. 8 (DEFEAT)
  • Drive completely controlled with belt tension servo
  • Real time counter
  • Locator functions: Zero Return (RTZ), Search Intersection (STC).
  • Block repeat between zero and cue point
  • TAPE LOAD mode for easy tape handling, to avoid independent tape unwinding.
  • Tape output jacks (1 - 8)
  • PITCH control
  • Speed selector VARI/FIX/EXT
  • Complete drive control logic
  • Additional connection for an SMPTE interlock system or optional Auto-Locator AQ - 65
  • Possibility of drive remote control by optimal remote control unit RC -71
  • Possibility of remote controlled "Punch In/Punch Out" with optimal add-on unit RC - 30 P
  • Pitch fluctuation: 0,05% WRMS
  • Frequency response over all: 35 Hz-15 Hz, +/-3dB,-10VU
  • signal to noise ratio: 90dB w/dbx
  • Total harmonic distortion (THD): less than 1%


Remarks









Pictures

  • Image: TASCAM STUDIO 8 (Model 388)

Tascam 388-1.jpg


  • Excerpt from brochure: TASCAM STUDIO 8 (Model 388)

Tascam 388-Prospekt-1.jpg


Reports

Links