Difference between revisions of "Yamaha CR-800"

m (Schützte „Yamaha CR-800“ ([Bearbeiten=Nur Administratoren erlauben] (unbeschränkt) [Verschieben=Nur Administratoren erlauben] (unbeschränkt)))
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
 
__NOTOC__
 
__NOTOC__
== Daten ==
+
== Data ==
{{Navigation}}
+
{{navigation}}
'''Allgemein'''
+
'''General'''
* Hersteller: [[Yamaha]]
+
* Manufacturer: [[Yamaha]]
* Modell: CR-800
+
* Model: CR-800
* Typ: Receiver
+
* Years of manufacture: 1974 - 1976
* Baujahre: 1974 - 1976
+
* Made in: Japan
* Hergestellt in: Japan
+
* Color: Silver
* Farbe: Silber
+
* Power consumption: 300 watts
* Leistungsaufnahme: 300 Watt
+
* Dimensions: 474 x 158 x 300 mm
* Abmessungen: 474 x 158 x 300 mm
+
* Weight: 14 kg
* Gewicht: 14 kg
+
* Original price approx.: 1.500,- DM
* Neupreis ca.: 1'500 DM
 
  
  
'''Anschlüsse'''
+
'''Connections'''
* Anzahl der Eingänge:
+
* Number of inputs:
** 2x Phono, 2x Tape, Aux, Main-In, Mikrofon, Antenne
+
** 2x phono, 2x tape, aux, main-in, microphone, antenna.
* Anzahl der Ausgänge:
+
* Number of outputs:
** 2x Lautsprecher, Kopfhörer, 2x Rec-Out, Pre-Out, IF-Out
+
** 2x speaker, headphone, 2x Rec-Out, Pre-Out, IF-Out
  
  
'''Technische Daten'''
+
'''Technical Data'''
  
''Verstärker''
+
'''Amplifier'''
* Dauerleistung (bei Klirrfaktor):
+
* Continuous power (at distortion):
 
** 8 Ohm: 2x 55 Watt
 
** 8 Ohm: 2x 55 Watt
** 4 Ohm: 2x 70 Watt
+
4 Ohm: 2x 70 Watt
* Dynamikleistung:
+
* Dynamic power:
 
** 8 Ohm: 2x 130 Watt
 
** 8 Ohm: 2x 130 Watt
 
** 4 Ohm: 2x 150 Watt
 
** 4 Ohm: 2x 150 Watt
* Gesamtklirrfaktor: < 0,1%
+
* Total harmonic distortion: < 0,1%
 
* Dämpfungsfaktor: >70
 
* Dämpfungsfaktor: >70
* Eingang (Empfindlichkeit/Impedanz)
+
* Input (sensitivity/impedance)
 
** Phono 3 mV/50 kOhm
 
** Phono 3 mV/50 kOhm
 
** Tape, Aux 150 mV/45 kOhm
 
** Tape, Aux 150 mV/45 kOhm
 
** Main-In 775 mV/45 KOhm
 
** Main-In 775 mV/45 KOhm
** Mikrofon 3 mV/50 KOhm
+
** Microphone 3 mV/50 KOhm
* Ausgang (Pegel/Impedanz):
+
* Output (level/impedance):
 
** Rec-Out 150mV/2 KOhm
 
** Rec-Out 150mV/2 KOhm
 
** Pre-Out 775mV/2 KOhm
 
** Pre-Out 775mV/2 KOhm
** IF-Out 400mV/1 KOhm
+
IF-Out 400mV/1 KOhm
* Frequenzgang: 10-50000 Hz
+
* Frequency response: 10-50000 Hz
* Klangregelung:
+
* Tone control:
** Bass: &plusmn;15dB bei 50 Hz
+
** Bass: &plusmn;15dB at 50 Hz
** Höhen: &plusmn;10dB bei 10000 Hz
+
Treble: &plusmn;10dB at 10000 Hz
* Loudness: regelbar
+
* Loudness: adjustable
* Subsonic: Nein
+
* Subsonic: No
* Mute: Ja
+
* Mute: Yes
* Direct/Line-Straight: Nein
+
* Direct/Line-Straight: No
* Brummspannungsabstand (kurzgeschlossen): >90dB
+
* Ripple distance (short-circuited): &gt;90dB
* Stereokanaltrennung: >50dB
+
* Stereo channel separation: &gt;50dB
* Signalrauschabstand:
+
* Signal-to-noise ratio:
  
  
 
''Tuner''
 
''Tuner''
* Empfang: UKW, MW
+
* Reception: FM, MW
* Frequenzen:
+
* Frequencies:
** UKW: 88-108 MHz
+
** FM: 88-108 MHz
** MW: 525 - 1605 kHz
+
MW: 525 - 1605 kHz
* Frequenzgang: 10 - 15'000 Hz
+
* Frequency response: 10 - 15,000 Hz
* Eingangsempfindlichkeit: 1,7µV IHF
+
* Input sensitivity: 1.7µV IHF
* Klirrfaktor: 0,3% (Stereo)
+
* Distortion factor: 0.3% (stereo)
* Signalrauschabstand: 75dB
+
* Signal to noise ratio: 75dB
* Kanaltrennung: 45dB
+
* Channel separation: 45dB
* Trennschärfe: 65dB
+
* Selectivity: 65dB
* Gleichwellenselektion: 1,0dB  
+
* Co-wave selection: 1.0dB  
* Nebenwellenselektion: 100dB
+
* Spurious wave selection: 100dB
* Spiegelfrequenzdämpfung: 100dB
+
* Image frequency attenuation: 100dB
* ZF-Dämpfung: 100dB
+
* IF attenuation: 100dB
* AM-Unterdrückung: 55dB
+
* AM suppression: 55dB
  
  
'''Besondere Ausstattungen'''
+
'''Special Features'''
* Sendermittenanzeige
+
* Transmitter center display
* Senderfeldstärkeanzeige
+
* Transmitter field strength indicator
* Regelbarer Mikrofoneingang
+
* Adjustable microphone input
* Auftrennbare Vor- und Endstufe
+
* Separable pre- and power amplifier
* Schaltbare Low- und High-Filter
+
* Switchable low and high filters
  
  
== Bemerkungen ==
+
== Notes ==
* Weitere Modelle der gleichen Serie:
+
* Other models in the same series:
* [[Yamaha CR-200 E]]
+
* [[Yamaha CR-200 E|CR-200 E]]
* [[Yamaha CR-400]]
+
* [[Yamaha CR-400|CR-400]]
* [[Yamaha CR-600]]
+
* [[Yamaha CR-600|CR-600]]
* [[Yamaha CR-800]]
+
* [[Yamaha CR-800|CR-800]]
* [[Yamaha CR-1000]]
+
* [[Yamaha CR-1000|CR-1000]]
  
 
+
== Pictures ==
== Bilder ==
+
* Image: Yamaha CR-800
* Bild: Yamaha CR-800
 
 
http://www.hifi-wiki.de/images/thumb/e/e8/Yamaha_CR-800_3.JPG/800px-Yamaha_CR-800_3.JPG
 
http://www.hifi-wiki.de/images/thumb/e/e8/Yamaha_CR-800_3.JPG/800px-Yamaha_CR-800_3.JPG
  
  
* Bild: Yamaha CR-800
+
* Image: Yamaha CR-800
 
http://www.hifi-wiki.de/images/thumb/5/5e/Yamaha_CR-800_4.JPG/800px-Yamaha_CR-800_4.JPG
 
http://www.hifi-wiki.de/images/thumb/5/5e/Yamaha_CR-800_4.JPG/800px-Yamaha_CR-800_4.JPG
  
  
* Auszug aus Prospekt: Yamaha CR-800
+
* Excerpt from brochure: Yamaha CR-800
[[Datei:Yamaha CR-800-Prospekt-1.jpg]]
+
[[File:Yamaha CR-800-Prospekt-1.jpg]]
  
  
== Berichte ==
+
== Reviews ==
* Ein Super Gerät mit vielen Anschlüssen
+
* A super device with many connections
* Super Klang, einfach der Hammer
+
* Super sound, simply the hammer
* Für alle die so ein Gerät haben und wo die Birnen kaputt sind...leider gibt es keine Birnen mehr für das Gerät, also müssen LED`S rein, 5V LED, 400 Ohm Widerstand.  
+
* For all those who have such a device and where the bulbs are broken...unfortunately there are no more bulbs for the device, so LED`S must pure, 5V LED, 400 Ohm resistor.  
* AW: 12V, 60mA Lampen müssen da rein, gibt es überall zu kaufen. Von einem Umbau auf LEDs ist dringendst abzuraten, da diese zu hell und ungleichmäßig leuchten.
+
* AW: 12V, 60mA bulbs need to go in there, you can buy them anywhere. From a conversion to LEDs is strongly discouraged, because they shine too brightly and unevenly.
  
  
 
== Links ==
 
== Links ==
  
[[Kategorie:Receiver]]
+
[[Category:Receiver]]</0,1%>

Latest revision as of 16:28, 15 May 2019

Data

General

  • Manufacturer: Yamaha
  • Model: CR-800
  • Years of manufacture: 1974 - 1976
  • Made in: Japan
  • Color: Silver
  • Power consumption: 300 watts
  • Dimensions: 474 x 158 x 300 mm
  • Weight: 14 kg
  • Original price approx.: 1.500,- DM


Connections

  • Number of inputs:
    • 2x phono, 2x tape, aux, main-in, microphone, antenna.
  • Number of outputs:
    • 2x speaker, headphone, 2x Rec-Out, Pre-Out, IF-Out


Technical Data

Amplifier

  • Continuous power (at distortion):
    • 8 Ohm: 2x 55 Watt

4 Ohm: 2x 70 Watt

  • Dynamic power:
    • 8 Ohm: 2x 130 Watt
    • 4 Ohm: 2x 150 Watt
  • Total harmonic distortion: < 0,1%
  • Dämpfungsfaktor: >70
  • Input (sensitivity/impedance)
    • Phono 3 mV/50 kOhm
    • Tape, Aux 150 mV/45 kOhm
    • Main-In 775 mV/45 KOhm
    • Microphone 3 mV/50 KOhm
  • Output (level/impedance):
    • Rec-Out 150mV/2 KOhm
    • Pre-Out 775mV/2 KOhm

IF-Out 400mV/1 KOhm

  • Frequency response: 10-50000 Hz
  • Tone control:
    • Bass: ±15dB at 50 Hz

Treble: ±10dB at 10000 Hz

  • Loudness: adjustable
  • Subsonic: No
  • Mute: Yes
  • Direct/Line-Straight: No
  • Ripple distance (short-circuited): >90dB
  • Stereo channel separation: >50dB
  • Signal-to-noise ratio:


Tuner

  • Reception: FM, MW
  • Frequencies:
    • FM: 88-108 MHz

MW: 525 - 1605 kHz

  • Frequency response: 10 - 15,000 Hz
  • Input sensitivity: 1.7µV IHF
  • Distortion factor: 0.3% (stereo)
  • Signal to noise ratio: 75dB
  • Channel separation: 45dB
  • Selectivity: 65dB
  • Co-wave selection: 1.0dB
  • Spurious wave selection: 100dB
  • Image frequency attenuation: 100dB
  • IF attenuation: 100dB
  • AM suppression: 55dB


Special Features

  • Transmitter center display
  • Transmitter field strength indicator
  • Adjustable microphone input
  • Separable pre- and power amplifier
  • Switchable low and high filters


Notes

Pictures

  • Image: Yamaha CR-800

800px-Yamaha_CR-800_3.JPG


  • Image: Yamaha CR-800

800px-Yamaha_CR-800_4.JPG


  • Excerpt from brochure: Yamaha CR-800

Yamaha CR-800-Prospekt-1.jpg


Reviews

  • A super device with many connections
  • Super sound, simply the hammer
  • For all those who have such a device and where the bulbs are broken...unfortunately there are no more bulbs for the device, so LED`S must pure, 5V LED, 400 Ohm resistor.
  • AW: 12V, 60mA bulbs need to go in there, you can buy them anywhere. From a conversion to LEDs is strongly discouraged, because they shine too brightly and unevenly.


Links

</0,1%>