Yamaha CR-600
Data
General
- Manufacturer: Yamaha
- Model: CR-600
- Year of manufacture: 1973 - 1976
- Made in: Japan
- Color: Silver with woodcase
- Remote control: No
- Power consumption: 320 watts
- Dimensions: 474 x 158 x 300 mm (W x H x D)
- Weight: 15,5 kg
- Original price approx.: 1.100,- DM
Connections
- Number of inputs:
- 2x phono, 2x tape, aux, main-in, microphone, antenna.
- Number of outputs:
- 2x speaker, headphone, 2x Rec-Out, Pre-Out, IF-Out
Technical Data
Amplifier
- Continuous power (at distortion):
- 8 Ohm: 2x 40 Watt RMS
4 Ohm: 2x 50 Watt RMS
- Dynamic power:
- 8 Ohm: 2x 100 Watt
- 4 Ohm: 2x 140 Watt
- Total harmonic distortion: < 0,01%
- Dämpfungsfaktor: >70
- Input (sensitivity/impedance)
- Phono 3 mV/50 kOhm
- Tape, Aux 150 mV/45 kOhm
- Main-In 775 mV/45 KOhm
- Microphone 3 mV/50 KOhm
- Output (level/impedance):
- Rec-Out 150mV/2 KOhm
- Pre-Out 775mV/2 KOhm
IF-Out 400mV/1 KOhm
- Frequency response: 5-50000 Hz
- Tone control:
- Bass: ±10dB at 50 Hz
Treble: ±10dB at 10000 Hz
- Loudness: adjustable
- Subsonic: No
- Mute: No
- Direct/Line-Straight: No
- Ripple distance (short-circuited): >90dB
- Stereo channel separation: >50dB
- Signal-to-noise ratio:
Tuner
- Reception:
- Frequencies:
- FM: 88 - 108 MHz
- MW: 520 - 1605 kHz
- Frequency response: 30 - 15'000 Hz
- Input sensitivity: 2 µV IHF
- Distortion factor: 0.5% (stereo)
- Signal to noise ratio: 70dB
- Channel separation: 40dB
- Selectivity: 65dB
- Co-wave selection: 1.5dB
- Spurious wave selection: 95dB
- Image frequency attenuation: 90dB
- IF attenuation: 95dB
- AM suppression: 55dB
Special Features
- Transmitter center display
- Transmitter field strength indicator
- Adjustable microphone input
- Separable pre- and power amplifier
- Switchable low and high filters
- Continuously adjustable loudness
Notes
Pictures
- Image: Yamaha CR-600
- Image: Yamaha CR-600
- Excerpt from brochure: Yamaha CR-600
Reports
Links
</0,01%>