Difference between revisions of "Fisher RS-1058"
(5 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Fisher]] |
− | * | + | * Model: RS-1058 |
− | * | + | * Type: Receiver |
− | * | + | * Years of manufacture: 1977 - 1979 |
− | * | + | * Made in: Japan |
− | * | + | * Color: Silver |
− | * | + | * Remote control: no |
− | * | + | * Power consumption: 500 W |
− | * | + | * Dimensions: 530 x 180 x 360 mm (WxHxD) |
− | * | + | * Weight: 14,7 kg |
− | * | + | * Original price approx.: 1'598 DM |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
** 2x Phono: 2 mV / 50 kOhm | ** 2x Phono: 2 mV / 50 kOhm | ||
** 4x Line In: 150 mV / 100 kOhm | ** 4x Line In: 150 mV / 100 kOhm | ||
− | ** | + | ** Antenna |
− | * | + | * Number of outputs: |
** 2x Line Out: 150 mV / 1 kOhm | ** 2x Line Out: 150 mV / 1 kOhm | ||
− | ** 2 | + | ** 2 headphones |
− | ** 3 | + | ** 3 pairs of loudspeakers |
− | ''' | + | '''Technical Data''' |
− | '' | + | ''Amplifier'' |
− | * | + | * Continuous power (DIN) |
− | + | 8 Ohm: 2x 85 W | |
− | + | 4 Ohm: 2x 90 W | |
− | * | + | * Dynamic power |
** 8 Ohm: 2x 85 W | ** 8 Ohm: 2x 85 W | ||
** 4 Ohm: 2x 110 W | ** 4 Ohm: 2x 110 W | ||
− | * | + | * Total harmonic distortion: 0.1% (at nominal power) |
− | * | + | * Attenuation factor: |
− | * | + | * Frequency response: |
− | ** 20 - 30 | + | ** 20 - 30,000 Hz (±1 dB) |
− | ** | + | ** Power bandwidth: 7 - 35,000 Hz |
− | * | + | * Signal-to-noise ratio: (extraneous voltage) |
** Phono: 65 dB | ** Phono: 65 dB | ||
− | + | Line In: 75 dB | |
− | * | + | * Stereo Channel Separation: |
− | * | + | * Tone control: |
− | ** Bass: ±10 dB | + | ** Bass: ±10 dB at 100 Hz |
− | ** | + | ** Mid: ±10 dB at 1.5 kHz |
− | ** | + | ** Treble: ±10 dB at 10 kHz |
− | * Loudness: | + | * Loudness: yes |
* High Filter: 5 kHz | * High Filter: 5 kHz | ||
* Low Filter (Subsonic): 30 Hz | * Low Filter (Subsonic): 30 Hz | ||
* Mute: FM Muting | * Mute: FM Muting | ||
− | * Direct/Line-Straight: | + | * Direct/Line-Straight: yes |
''Tuner'' | ''Tuner'' | ||
− | * | + | * Reception: |
− | * | + | * Frequencies: |
− | ** | + | ** FM: 87.5 - 109 MHz |
− | ** MW: 515 - 1 | + | ** MW: 515 - 1,700 kHz |
− | * | + | * Frequency response: |
− | * | + | * Input sensitivity: |
− | ** | + | ** FM: 1.0 µV (DIN, mono) |
− | + | VHF: 4.3 µV / 17.9 dBf (IHF, stereo) | |
** MW: 300 µV/m (IHF) | ** MW: 300 µV/m (IHF) | ||
− | + | Distortion factor: | |
− | ** | + | ** FM: 0.15% (mono), 0.25% (stereo). |
− | ** MW: 0 | + | ** MW: 0.2% |
− | + | Signal-to-noise ratio: | |
− | ** | + | ** FM: 70 / 67 dB (mono/stereo). |
** MW: 65 dB | ** MW: 65 dB | ||
− | * | + | * Channel separation: |
− | ** | + | ** FM: 40 dB |
− | * | + | * selectivity: |
− | ** | + | ** FM: 70 dB |
** MW: 43 dB | ** MW: 43 dB | ||
− | * | + | * Equal wave selection: |
− | ** | + | ** FM: 0.8 dB |
− | * | + | * Spurious wave selection: |
− | * | + | * Image frequency attenuation: |
− | ** | + | ** FM: 80 dB |
− | + | MW: 70 dB | |
− | * | + | * IF attenuation: |
− | * AM | + | * AM suppression: 65 dB |
− | |||
− | |||
− | |||
− | ''' | + | '''Special Features''' |
− | * | + | * Pre-/power stage separable |
− | * | + | * Subsonic filter (5 Hz) |
− | == | + | == Remarks == |
− | * | + | * Other models in the same series: |
+ | * [[Fisher RS-1020]] | ||
* [[Fisher RS-1022]] | * [[Fisher RS-1022]] | ||
* [[Fisher RS-1035]] | * [[Fisher RS-1035]] | ||
Line 106: | Line 104: | ||
− | == | + | == Pictures == |
− | * | + | * Image: Fisher RS-1058 |
− | [[ | + | [[File:Fisher RS-1058-1.jpg]] |
− | == | + | == Reviews == |
− | * | + | * Review by "Good Old Hifi": [[http://www.good-old-hifi.de/fisher_rs-1058/]] |
== Links == | == Links == | ||
− | [[ | + | [[Category:Receiver]] |
Latest revision as of 08:32, 20 May 2019
Data[edit]
General
- Manufacturer: Fisher
- Model: RS-1058
- Type: Receiver
- Years of manufacture: 1977 - 1979
- Made in: Japan
- Color: Silver
- Remote control: no
- Power consumption: 500 W
- Dimensions: 530 x 180 x 360 mm (WxHxD)
- Weight: 14,7 kg
- Original price approx.: 1'598 DM
Connections
- Number of inputs:
- 2x Phono: 2 mV / 50 kOhm
- 4x Line In: 150 mV / 100 kOhm
- Antenna
- Number of outputs:
- 2x Line Out: 150 mV / 1 kOhm
- 2 headphones
- 3 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power (DIN)
8 Ohm: 2x 85 W 4 Ohm: 2x 90 W
- Dynamic power
- 8 Ohm: 2x 85 W
- 4 Ohm: 2x 110 W
- Total harmonic distortion: 0.1% (at nominal power)
- Attenuation factor:
- Frequency response:
- 20 - 30,000 Hz (±1 dB)
- Power bandwidth: 7 - 35,000 Hz
- Signal-to-noise ratio: (extraneous voltage)
- Phono: 65 dB
Line In: 75 dB
- Stereo Channel Separation:
- Tone control:
- Bass: ±10 dB at 100 Hz
- Mid: ±10 dB at 1.5 kHz
- Treble: ±10 dB at 10 kHz
- Loudness: yes
- High Filter: 5 kHz
- Low Filter (Subsonic): 30 Hz
- Mute: FM Muting
- Direct/Line-Straight: yes
Tuner
- Reception:
- Frequencies:
- FM: 87.5 - 109 MHz
- MW: 515 - 1,700 kHz
- Frequency response:
- Input sensitivity:
- FM: 1.0 µV (DIN, mono)
VHF: 4.3 µV / 17.9 dBf (IHF, stereo)
- MW: 300 µV/m (IHF)
Distortion factor:
- FM: 0.15% (mono), 0.25% (stereo).
- MW: 0.2%
Signal-to-noise ratio:
- FM: 70 / 67 dB (mono/stereo).
- MW: 65 dB
- Channel separation:
- FM: 40 dB
- selectivity:
- FM: 70 dB
- MW: 43 dB
- Equal wave selection:
- FM: 0.8 dB
- Spurious wave selection:
- Image frequency attenuation:
- FM: 80 dB
MW: 70 dB
- IF attenuation:
- AM suppression: 65 dB
Special Features
- Pre-/power stage separable
- Subsonic filter (5 Hz)
Remarks[edit]
- Other models in the same series:
- Fisher RS-1020
- Fisher RS-1022
- Fisher RS-1035
- Fisher RS-1052
- Fisher RS-1056
- Fisher RS-1058
- Fisher RS-1060
- Fisher RS-1080
Pictures[edit]
- Image: Fisher RS-1058
Reviews[edit]
- Review by "Good Old Hifi": [[1]]