Difference between revisions of "Akai AA-6300"
(6 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Akai]] |
− | * | + | * Model: AA-6300 |
− | * | + | * Type: Receiver |
− | * | + | * Years of manufacture: 1970 - 1973 |
− | * | + | * Made in: Japan |
− | * | + | * Color: silver / black, housing wood, walnut |
− | * | + | * Power consumption: 100 W |
− | * | + | * Dimensions (WxHxD): 445 x 133 x 340 mm |
− | * | + | * Weight: 10.4 kg |
+ | * Original price approx.: 940 DM (1973) | ||
− | ''' | + | '''Connections:''' |
− | * | + | * Number of inputs: |
** Phono MM: 3 mV, 50 kOhm | ** Phono MM: 3 mV, 50 kOhm | ||
** AUX: 150 mV, 50 kOhm | ** AUX: 150 mV, 50 kOhm | ||
Line 21: | Line 22: | ||
** Tape 2 Play DIN: 200 mV, 50 kOhm | ** Tape 2 Play DIN: 200 mV, 50 kOhm | ||
** Main In: 770 mV, 100 kOhm | ** Main In: 770 mV, 100 kOhm | ||
− | ** | + | ** Antenna: 75 Ohm, 300 Ohm |
− | * | + | * Number of outputs: |
** Tape Rec: 150 mV | ** Tape Rec: 150 mV | ||
− | + | Tape Rec DIN: 25 mV | |
** Pre-Out: | ** Pre-Out: | ||
− | ** | + | ** Headphones: 8 - 16 Ohm |
− | ** | + | ** 2 pairs of speakers |
− | ''' | + | '''Technical Data''' |
− | '' | + | ''Amplifier'' |
− | * | + | * Continuous power (at distortion) |
− | ** 8 Ohm: 2x 20 W, 0 | + | ** 8 Ohm: 2x 20 W, 0.8 % |
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * dynamic power |
** 8 Ohm: 2x 40 W | ** 8 Ohm: 2x 40 W | ||
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Total harmonic distortion: 0.15 % at 15 W |
− | * | + | * Attenuation factor: |
− | * | + | * Frequency response: 20 - 40,000 Hz, - 3 dB |
− | * | + | * Signal-to-noise ratio: |
** Phono: 60 dB | ** Phono: 60 dB | ||
** AUX: 70 dB | ** AUX: 70 dB | ||
− | * | + | * Tone control: |
− | ** Bass: ± 10 dB | + | ** Bass: ± 10 dB at 100 Hz |
− | ** | + | ** Tweeter: ± 10 dB at 10 kHz |
− | * Loudness: | + | * Loudness: yes, + 6 dB at 100 Hz, + 6 dB at 10 kHz |
* Low Filter (Subsonic): | * Low Filter (Subsonic): | ||
* High Filter: | * High Filter: | ||
Line 55: | Line 56: | ||
''Tuner'' | ''Tuner'' | ||
− | * | + | * Reception: FM/MW |
− | * | + | * Frequencies: |
− | ** | + | ** FM: 88 - 108 MHz |
** MW: 535 - 1605 KHz | ** MW: 535 - 1605 KHz | ||
− | * | + | * Input sensitivity: |
− | ** | + | ** FM: 2.0µV |
** MW: 150µV | ** MW: 150µV | ||
− | * | + | * Frequency range: |
− | * | + | * Distortion factor: 0.8 |
− | * | + | * Signal-to-noise ratio: > 65 dB |
− | * | + | * Channel separation: > 35 dB |
− | * | + | * selectivity: > 50 dB |
− | * | + | * Co-wave selection: 2.0 dB |
− | * | + | * Spurious wave selection: 34 dB |
− | * | + | * Image frequency attenuation: > 50 dB |
− | * | + | * IF attenuation: > 90 dB |
− | * AM | + | * AM suppression: 55 dB |
− | ''' | + | '''Special Features''' |
− | * | + | * Mono / Stereo switch |
− | * | + | * FM muting |
− | |||
− | |||
− | |||
− | |||
− | == | + | == Remarks == |
− | * | + | * Other models in the same series: |
− | * [[Akai | + | * [[Akai AA-6300]] |
− | * [[Akai | + | * [[Akai AA-6600]] |
− | * [[Akai | + | * [[Akai AA-8000]] |
− | * [[Akai | + | * [[Akai AA-8500]] |
− | * | + | * [[Corresponding Reel Tape]] |
− | * [[Akai | + | * [[Akai X-200 D]] |
− | == | + | == Pictures == |
− | * | + | * Image: Akai AA-6300 |
− | [[ | + | [[File:AKAI AA-6300-1.jpg]] |
− | == | + | * Excerpt from brochure: Akai AA-6300 |
+ | [[File:Akai AA-6300-Prospekt-2.jpg]] | ||
+ | |||
+ | |||
+ | == Reports == | ||
== Links == | == Links == | ||
− | [[ | + | [[Category:Receiver]] |
Latest revision as of 11:36, 8 August 2018
Data[edit]
General
- Manufacturer: Akai
- Model: AA-6300
- Type: Receiver
- Years of manufacture: 1970 - 1973
- Made in: Japan
- Color: silver / black, housing wood, walnut
- Power consumption: 100 W
- Dimensions (WxHxD): 445 x 133 x 340 mm
- Weight: 10.4 kg
- Original price approx.: 940 DM (1973)
Connections:
- Number of inputs:
- Phono MM: 3 mV, 50 kOhm
- AUX: 150 mV, 50 kOhm
- Tape Play: 200 mV, 50 kOhm
- Tape 2 Play DIN: 200 mV, 50 kOhm
- Main In: 770 mV, 100 kOhm
- Antenna: 75 Ohm, 300 Ohm
- Number of outputs:
- Tape Rec: 150 mV
Tape Rec DIN: 25 mV
- Pre-Out:
- Headphones: 8 - 16 Ohm
- 2 pairs of speakers
Technical Data
Amplifier
- Continuous power (at distortion)
- 8 Ohm: 2x 20 W, 0.8 %
- 4 Ohm:
- dynamic power
- 8 Ohm: 2x 40 W
- 4 Ohm:
- Total harmonic distortion: 0.15 % at 15 W
- Attenuation factor:
- Frequency response: 20 - 40,000 Hz, - 3 dB
- Signal-to-noise ratio:
- Phono: 60 dB
- AUX: 70 dB
- Tone control:
- Bass: ± 10 dB at 100 Hz
- Tweeter: ± 10 dB at 10 kHz
- Loudness: yes, + 6 dB at 100 Hz, + 6 dB at 10 kHz
- Low Filter (Subsonic):
- High Filter:
- Muting:
Tuner
- Reception: FM/MW
- Frequencies:
- FM: 88 - 108 MHz
- MW: 535 - 1605 KHz
- Input sensitivity:
- FM: 2.0µV
- MW: 150µV
- Frequency range:
- Distortion factor: 0.8
- Signal-to-noise ratio: > 65 dB
- Channel separation: > 35 dB
- selectivity: > 50 dB
- Co-wave selection: 2.0 dB
- Spurious wave selection: 34 dB
- Image frequency attenuation: > 50 dB
- IF attenuation: > 90 dB
- AM suppression: 55 dB
Special Features
- Mono / Stereo switch
- FM muting
Remarks[edit]
- Other models in the same series:
- Akai AA-6300
- Akai AA-6600
- Akai AA-8000
- Akai AA-8500
Pictures[edit]
- Image: Akai AA-6300
- Excerpt from brochure: Akai AA-6300