Difference between revisions of "Yamaha CR-200 E"
(→Daten) |
m (Schützte „Yamaha CR-200 E“ ([Bearbeiten=Nur Administratoren erlauben] (unbeschränkt) [Verschieben=Nur Administratoren erlauben] (unbeschränkt))) |
||
| (5 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Yamaha]] |
| − | * | + | * Model: CR-200 E |
| − | * | + | * Year of manufacture: 1976 - 1977 |
| − | * | + | * Made in: Japan |
| − | * | + | * Color: Silver |
| − | * | + | * Remote control: No |
| − | * | + | * Power consumption: 140 watts |
| − | * | + | * Dimensions: 415 x 133 x 293 mm (W x H x D) |
| − | * | + | * Weight: 7,2 Kg |
| − | * | + | * Original price approx.: 600,- DM |
| − | ''' | + | '''Connections''' |
| − | * | + | * Number of inputs: |
| − | ** Phono, Tape, Aux, | + | ** Phono, Tape, Aux, Antenna. |
| − | * | + | * Number of outputs: |
| − | ** 2x | + | ** 2x speaker, headphone, rec-out |
| − | ''' | + | '''Technical Data''' |
| − | '' | + | ''Amplifier'' |
| − | * | + | * Continuous power (at distortion): |
** 8 Ohm: 2x 16 Watt | ** 8 Ohm: 2x 16 Watt | ||
| − | + | 4 Ohm: 2x 20 Watt | |
| − | * | + | * Dynamic power: |
** 8 Ohm: 2x 18 Watt | ** 8 Ohm: 2x 18 Watt | ||
** 4 Ohm: 2x 25 Watt | ** 4 Ohm: 2x 25 Watt | ||
| − | * | + | * Total harmonic distortion: < 0,1% |
* Dämpfungsfaktor: >40 | * Dämpfungsfaktor: >40 | ||
| − | * | + | * Input (sensitivity/impedance) |
** Phono 3 mV/50 kOhm | ** Phono 3 mV/50 kOhm | ||
** Tape, Aux 150 mV/50 kOhm | ** Tape, Aux 150 mV/50 kOhm | ||
| − | * | + | * Output (level/impedance): |
** Rec-Out 150mV/10 KOhm | ** Rec-Out 150mV/10 KOhm | ||
| − | * | + | * Frequency response: 20-50000 Hz |
| − | * | + | * Tone control: |
| − | ** Bass: ±10dB | + | ** Bass: ±10dB at 50 Hz. |
| − | + | Treble: ±10dB at 10000 Hz | |
| − | * Loudness: | + | * Loudness: switchable |
| − | * Subsonic: | + | * Subsonic: No |
| − | * Mute: | + | * Mute: No |
| − | * Direct/Line-Straight: | + | * Direct/Line-Straight: No |
| − | * | + | * Ripple distance (short-circuited): >85dB |
| − | * | + | * Stereo channel separation: >50dB |
| − | * | + | * Signal-to-noise ratio: |
''Tuner'' | ''Tuner'' | ||
| − | * | + | * Reception: |
| − | * | + | * Frequencies: |
| − | ** | + | ** FM: 88-108 MHz |
| − | ** | + | ** MW: 525 - 1605 kHz |
| − | * | + | * Frequency response: 30 - 15,000 Hz |
| − | * | + | * Input sensitivity: 1.7µV IHF |
| − | * | + | * Distortion factor: 0.8% (stereo) |
| − | * | + | * Signal to noise ratio: 68dB |
| − | * | + | * Channel separation: 40dB |
| − | * | + | * Selectivity: 60dB |
| − | * | + | * Co-wave selection: 2dB |
| − | * | + | * Spurious wave selection: 75dB |
| − | * | + | * Image frequency attenuation: 55dB |
| − | * | + | * IF attenuation: 75dB |
| − | * AM | + | * AM suppression: 50dB |
| − | |||
| − | |||
| − | |||
| − | ''' | + | '''Special Features''' |
| − | * | + | * Transmitter field strength indicator |
| − | == | + | |
| − | + | == Remarks == | |
| + | * Other models in the same series: | ||
| + | * [[Yamaha CR-200 E|CR-200 E]] | ||
* [[Yamaha CR-400|CR-400]] | * [[Yamaha CR-400|CR-400]] | ||
* [[Yamaha CR-600|CR-600]] | * [[Yamaha CR-600|CR-600]] | ||
| Line 82: | Line 81: | ||
* [[Yamaha CR-1000|CR-1000]] | * [[Yamaha CR-1000|CR-1000]] | ||
| − | == | + | == Pictures == |
| + | http://img905.imageshack.us/img905/5218/xqXqzt.jpg | ||
| + | http://img909.imageshack.us/img909/231/ZsoDNX.jpg | ||
| + | http://img907.imageshack.us/img907/299/ZEu7Mu.jpg | ||
| + | |||
| + | |||
| + | == Reports == | ||
| − | |||
== Links == | == Links == | ||
| − | [[ | + | |
| + | [[Category:Receiver]]</0,1%> | ||
Latest revision as of 16:31, 15 May 2019
Data
General
- Manufacturer: Yamaha
- Model: CR-200 E
- Year of manufacture: 1976 - 1977
- Made in: Japan
- Color: Silver
- Remote control: No
- Power consumption: 140 watts
- Dimensions: 415 x 133 x 293 mm (W x H x D)
- Weight: 7,2 Kg
- Original price approx.: 600,- DM
Connections
- Number of inputs:
- Phono, Tape, Aux, Antenna.
- Number of outputs:
- 2x speaker, headphone, rec-out
Technical Data
Amplifier
- Continuous power (at distortion):
- 8 Ohm: 2x 16 Watt
4 Ohm: 2x 20 Watt
- Dynamic power:
- 8 Ohm: 2x 18 Watt
- 4 Ohm: 2x 25 Watt
- Total harmonic distortion: < 0,1%
- Dämpfungsfaktor: >40
- Input (sensitivity/impedance)
- Phono 3 mV/50 kOhm
- Tape, Aux 150 mV/50 kOhm
- Output (level/impedance):
- Rec-Out 150mV/10 KOhm
- Frequency response: 20-50000 Hz
- Tone control:
- Bass: ±10dB at 50 Hz.
Treble: ±10dB at 10000 Hz
- Loudness: switchable
- Subsonic: No
- Mute: No
- Direct/Line-Straight: No
- Ripple distance (short-circuited): >85dB
- Stereo channel separation: >50dB
- Signal-to-noise ratio:
Tuner
- Reception:
- Frequencies:
- FM: 88-108 MHz
- MW: 525 - 1605 kHz
- Frequency response: 30 - 15,000 Hz
- Input sensitivity: 1.7µV IHF
- Distortion factor: 0.8% (stereo)
- Signal to noise ratio: 68dB
- Channel separation: 40dB
- Selectivity: 60dB
- Co-wave selection: 2dB
- Spurious wave selection: 75dB
- Image frequency attenuation: 55dB
- IF attenuation: 75dB
- AM suppression: 50dB
Special Features
- Transmitter field strength indicator
Remarks
Pictures
Reports
Links
</0,1%>