Difference between revisions of "Kenwood KA-5006"
(3 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Kenwood]] |
− | * | + | * Model: KA-5006 (US version) |
− | * | + | * Type: Integrated amplifier |
− | * | + | * Years of manufacture: 1974 - 1976 |
− | * | + | * Made in: Japan |
− | * | + | * Color: Silver, wooden side panels |
− | * | + | * Power consumption: 80 W |
− | * | + | * Dimensions (WxHxD): 435 x 157 x 300 mm |
− | * | + | * Weight: 11 Kg |
− | * | + | * Original price approx.: 57'000 Yen (Japan, 1974); (this corresponds to about 850 DM, but as far as known, these amplifiers were not sold in Europe) |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
− | ** | + | ** Input sensitivity: |
− | ** Phono | + | ** Phono MM: 2.5mV, 50 kOhm, 140 mV max. |
− | |||
** Tuner: 150mV, 50 kOhm | ** Tuner: 150mV, 50 kOhm | ||
** AUX: 150mV, 50 kOhm | ** AUX: 150mV, 50 kOhm | ||
** Tape Play 1, 2: 150mV, 50 kOhm | ** Tape Play 1, 2: 150mV, 50 kOhm | ||
− | ** Tape Play DIN | + | ** Tape Play DIN: |
− | * | + | * Number of outputs: |
− | + | ** Outputs: | |
− | ** | ||
** Tape Rec 1, 2: 150mV, 50 kOhm | ** Tape Rec 1, 2: 150mV, 50 kOhm | ||
− | ** Tape Rec DIN | + | ** Tape Rec DIN: 40mV, 70 kOhm |
− | ** | + | ** Headphones: 0.5 mV, 8 Ohm |
− | + | ** Connectors for 2 pairs of speakers | |
− | ** | ||
− | ''' | + | '''Technical Data''' |
− | * | + | * Continuous power (at distortion factor) |
** 8 Ohm: 2x 35 W (RMS, 20Hz...20Khz) | ** 8 Ohm: 2x 35 W (RMS, 20Hz...20Khz) | ||
** 4 Ohm: 2x 48 W | ** 4 Ohm: 2x 48 W | ||
− | * | + | * Dynamic power |
** 8 Ohm: 2x 47,5 W | ** 8 Ohm: 2x 47,5 W | ||
** 4 Ohm: 2x 72,5 W | ** 4 Ohm: 2x 72,5 W | ||
− | * | + | * Total harmonic distortion: 0.5 % THD at 8 Ohm |
− | * | + | * Attenuation factor: 32 at 8 Ohm |
− | * | + | * Frequency response: 10 - 40'000 Hz |
− | * | + | * Signal-to-noise ratio: |
− | ** Phono | + | ** Phono: 76 dB |
− | |||
** Tuner: 90 dB | ** Tuner: 90 dB | ||
** AUX 1, 2: 90 dB | ** AUX 1, 2: 90 dB | ||
** Tape Play A, B: 90 dB | ** Tape Play A, B: 90 dB | ||
− | * | + | * Tone control |
− | + | Bass: ± 10 dB at 100 Hz | |
− | + | Treble: ± 10 dB at 10 kHz | |
− | * Loudness: + 8dB | + | * Loudness: + 8dB at 100Hz, + 3dB at 10kHz |
− | * High Filter: 6 dB/ | + | * High Filter: 6 dB/oct. at 7 kHz |
− | * Low Filter: 6 dB/ | + | * Low Filter: 6 dB/oct. at 80 Hz |
* Low Filter (Subsonic): | * Low Filter (Subsonic): | ||
* Muting: | * Muting: | ||
− | ''' | + | '''Special Features''' |
* Tape Dubbing | * Tape Dubbing | ||
− | == | + | == Remarks == |
− | * | + | * Other models in the same series: |
** [[Kenwood KA-3006|KA-3006]] | ** [[Kenwood KA-3006|KA-3006]] | ||
** [[Kenwood KA-4006|KA-4006]] | ** [[Kenwood KA-4006|KA-4006]] | ||
Line 75: | Line 71: | ||
− | == | + | == Pictures == |
− | * | + | * Extract from brochure: Kenwood KA-5006 |
− | [[Datei:Kenwood KA- | + | [[Datei:Kenwood KA-5006-1.jpg]] |
− | == | + | == Reports == |
Line 86: | Line 82: | ||
− | [[ | + | [[Category:Integrated amplifier]] |
Latest revision as of 04:44, 20 April 2018
Data[edit]
General
- Manufacturer: Kenwood
- Model: KA-5006 (US version)
- Type: Integrated amplifier
- Years of manufacture: 1974 - 1976
- Made in: Japan
- Color: Silver, wooden side panels
- Power consumption: 80 W
- Dimensions (WxHxD): 435 x 157 x 300 mm
- Weight: 11 Kg
- Original price approx.: 57'000 Yen (Japan, 1974); (this corresponds to about 850 DM, but as far as known, these amplifiers were not sold in Europe)
Connections
- Number of inputs:
- Input sensitivity:
- Phono MM: 2.5mV, 50 kOhm, 140 mV max.
- Tuner: 150mV, 50 kOhm
- AUX: 150mV, 50 kOhm
- Tape Play 1, 2: 150mV, 50 kOhm
- Tape Play DIN:
- Number of outputs:
- Outputs:
- Tape Rec 1, 2: 150mV, 50 kOhm
- Tape Rec DIN: 40mV, 70 kOhm
- Headphones: 0.5 mV, 8 Ohm
- Connectors for 2 pairs of speakers
Technical Data
- Continuous power (at distortion factor)
- 8 Ohm: 2x 35 W (RMS, 20Hz...20Khz)
- 4 Ohm: 2x 48 W
- Dynamic power
- 8 Ohm: 2x 47,5 W
- 4 Ohm: 2x 72,5 W
- Total harmonic distortion: 0.5 % THD at 8 Ohm
- Attenuation factor: 32 at 8 Ohm
- Frequency response: 10 - 40'000 Hz
- Signal-to-noise ratio:
- Phono: 76 dB
- Tuner: 90 dB
- AUX 1, 2: 90 dB
- Tape Play A, B: 90 dB
- Tone control
Bass: ± 10 dB at 100 Hz Treble: ± 10 dB at 10 kHz
- Loudness: + 8dB at 100Hz, + 3dB at 10kHz
- High Filter: 6 dB/oct. at 7 kHz
- Low Filter: 6 dB/oct. at 80 Hz
- Low Filter (Subsonic):
- Muting:
Special Features
- Tape Dubbing
Remarks[edit]
Pictures[edit]
- Extract from brochure: Kenwood KA-5006