Difference between revisions of "Myro Time 2"

(Bilder)
 
(7 intermediate revisions by 6 users not shown)
Line 1: Line 1:
== Beschreibung ==
+
== Description ==
Spitzenmodell, welches nach der [[ESS AMT 1 Tower]], der [[Myro Heaven's Gate]] und der [[Myro Time 1]] der jüngste Superlautsprecher von [[Myro]] ist. Er enthält die besten Chassis aus Keramik von [[Accuton]] sowie einen AMT.<br />
+
Top of the line model, contains the best chassis made of ceramic by [[Accuton]] and an Air Motion Transformer by [[Mundorf]].<br />
Im Zuge der konzeptionellen Planung waren einige Zielvorgaben aufgestellt, wie z.B.:
+
In the course of conceptual planning, some targets were set, such as:
*eine deutlich kleinere Bauform als bei der [[Myro Time 1]]
+
*a significantly smaller design than the [[Myro Time 1]]
*ein weiter Übertragungsbereich mit geringem Phase-Drift an den Übertragungsenden
+
*a wide transmission range with low phase drift at the transmission ends
*ein möglichst perfektes signal-/zeitrichtiges Zusammmenspiel der Systeme
+
as perfect as possible signal/time correct interaction of the systems
*ein Abstrahlverhalten mit annähernd Zylinderwellencharakteristik
+
a radiation pattern with almost cylindrical wave characteristics
  
Dazu waren erforderlich:
+
This required:
*Tieftonchassis mit sehr günstigen Parametern für kleine Volumen
+
*woofer drivers with very favourable parameters for small volumes
*Tieftöner, die auch als sehr hochwertige Mitteltöner einsetzbar sind, hinauf bis zum Übertragungsbereich der Accuton C50 Mitteltonkalotten
+
woofers that can also be used as very high quality midrange drivers, up to the frequency range of the Accuton C50 midrange domes
*eine Gehäusegeometrie mit Laufzeitausgleich der akustischen Zentren
+
*a cabinet geometry with delay compensation of the acoustic centres
*Basschassis in Schallzeilenanordnung
+
*bass drivers in sound line arrangement
  
 +
For the number and arrangement of the drivers the concept of the [[Myro Heaven's Gate]] is taken up again in a smaller scale. Exception: the tweeter is not an array of three AMTs, but an Air Motion Transformer (AMT) by [[Mundorf]], developed exclusively for the Time 2. This AMT is larger and more powerful than the standard types. The midrange drivers are also close to standard, but specially modified for the best sonic result. <br />
  
Es wird für die Anzahl und Anordnung der Chassis das Konzept der [[Myro Heaven's Gate]] in kleinerem Maßstab wieder aufgenommen. Ausnahme: Im Hochton kommt hier kein Array aus drei AMT, sondern ein exklusiv für die Time 2 entwickelter Air Motion Transformer (AMT) von [[Mundorf]] zum Einsatz. Dieser AMT ist größer und leistungsfähiger als die Serientypen. Auch die Mitteltöner sind seriennah, aber speziell modifiziert worden für das beste klangliche Ergebnis. <br />
+
Due to the very large diaphragm area (900 sq cm) and the closed, large-volume cabinet of the speaker, an excellent low-frequency reproduction is achieved. The transient response is favoured by the very low built-in quality and ranks among the absolute top. The extremely complex, passive equalisation of the low frequencies in the crossover took several months to develop. In order to calm the grilles in front of the diaphragms and to prevent a negative sonic influence, they are provided with plastic nubs in some places. <br />
 +
The cabinet contains struts inside, which lead to no parallel surfaces, so that no standing waves can form. The crossover is located behind the aluminium side panels. For better heat dissipation there are air slots in it.
  
Durch die große Membranfläche und das geschlossene, großvolumige Gehäuse des Lautsprechers gelingt eine exzellente Tieftonwiedergabe. Die extrem aufwändige, passive Entzerrung des Tieftons in der Frequenzweiche hat mehrere Monate in der Entwicklung gebraucht. Um die Gitter vor den Membranen zu beruhigen und einen negativen klanglichen Einfluss zu verhindern, werden sie an einigen Stellen mit Kunststoffnoppen versehen. <br />
+
The radiation pattern is vertically directed and horizontally wide open. In practice, this means that relatively little energy is radiated towards the floor and ceiling in the mid and high frequencies, thus mitigating the unpleasant initial reflections. This is ideal for a loudspeaker in the living room and not only there!<br />
Das Gehäuse enthält im Inneren Verstrebungen, welche zu keinen parallelen Flächen führen, sodass sich keine stehenden Wellen bilden können. Hinter den seitlichen Aluminiumblenden befindet sich die Frequenzweiche. Zur besseren Wärmeabfuhr sind darin Luftschlitze enthalten.  
+
The vertical dispersion, the fading out, is extraordinarily even. At the optimum listening distance of more than 3.5 m, the listener can lie on the sofa or sit on a bar stool without significant signal distortions clouding the sound image.<br />
 +
The Time's tweeter has a tall, narrow diaphragm. Its sound radiation is vertically stronger and horizontally less directed. The reproduced signal shapes (input = output) are excellent under horizontal listening angles.
 +
In practice, this means that the listeners in their living room can sit widely spread on their seating furniture.
  
'''Konzept'''
+
'''Concept'''
*Art: Standlautsprecher
+
*Type: floorstanding loudspeaker
*Wege: 3,5
+
*way: 3,5
*Gehäuse: geschlossen
+
*Cabinet: closed
*Maße (H x B x T) = 144 cm x 26 cm x 73,3 cm
+
*Dimensions (H x W x D) = 144 cm x 26 cm x 73.3 cm
*Grenzfrequenz: (- 3 dB) 27 Hz, (-7 dB) 20 Hz
+
cut-off frequency: (- 3 dB) 27 Hz, (-7 dB) 20 Hz
Neupreis: 38000 Euro
+
new price: 38000 Euro
  
'''Bestückung'''<br />
+
'''Equipment'''<br />
Hochton: 1 x Mundorf Air Motion Transformer [[AMT26-Myro-V2]]<br />
+
tweeter: 1 x air motion transformer [[Mundorf AMT26-Myro-V2]]<br />
Mittelton: 2 x ACCUTON C50-8-043 (Sondermodell für myro)<br />
+
midrange: 2 x [[Accuton C50-8-043]] (special model for myro)<br />
Mitteltiefton und Tiefton: 4 x ACCUTON C220-6-222
+
midrange and bass: 4 x ACCUTON C220-6-222
  
== Bilder ==
+
== Pictures ==
 
<gallery>
 
<gallery>
Datei:time.jpg|Myro Time 2
+
File:time.jpg|Myro Time 2
Datei:Time_AMT.jpg|Ein spezieller AMT
+
file:Time_AMT.jpg|A special AMT
 +
File:Time u MagicMusica 800high.jpg|... With [[Myro Magic Musica]]
 
</gallery>
 
</gallery>
  
== Zusatzinformationen ==
+
== Additional information ==
[http://www.weidlich-audio.de/time.html Produktbeschreibung]
+
[http://weidlich-audio.de/myro-time.html product-description]
  
 
<''zurück: [[Myro Lautsprecher]]''><br />
 
<''zurück: [[Myro Lautsprecher]]''><br />
 
<''zurück: [[Myro]]''>
 
<''zurück: [[Myro]]''>
  
[[Kategorie:Lautsprecher]]
+
[[Category:Loudspeaker]]

Latest revision as of 17:39, 29 December 2017

Description[edit]

Top of the line model, contains the best chassis made of ceramic by Accuton and an Air Motion Transformer by Mundorf.
In the course of conceptual planning, some targets were set, such as:

  • a significantly smaller design than the Myro Time 1
  • a wide transmission range with low phase drift at the transmission ends

as perfect as possible signal/time correct interaction of the systems a radiation pattern with almost cylindrical wave characteristics

This required:

  • woofer drivers with very favourable parameters for small volumes

woofers that can also be used as very high quality midrange drivers, up to the frequency range of the Accuton C50 midrange domes

  • a cabinet geometry with delay compensation of the acoustic centres
  • bass drivers in sound line arrangement

For the number and arrangement of the drivers the concept of the Myro Heaven's Gate is taken up again in a smaller scale. Exception: the tweeter is not an array of three AMTs, but an Air Motion Transformer (AMT) by Mundorf, developed exclusively for the Time 2. This AMT is larger and more powerful than the standard types. The midrange drivers are also close to standard, but specially modified for the best sonic result.

Due to the very large diaphragm area (900 sq cm) and the closed, large-volume cabinet of the speaker, an excellent low-frequency reproduction is achieved. The transient response is favoured by the very low built-in quality and ranks among the absolute top. The extremely complex, passive equalisation of the low frequencies in the crossover took several months to develop. In order to calm the grilles in front of the diaphragms and to prevent a negative sonic influence, they are provided with plastic nubs in some places.
The cabinet contains struts inside, which lead to no parallel surfaces, so that no standing waves can form. The crossover is located behind the aluminium side panels. For better heat dissipation there are air slots in it.

The radiation pattern is vertically directed and horizontally wide open. In practice, this means that relatively little energy is radiated towards the floor and ceiling in the mid and high frequencies, thus mitigating the unpleasant initial reflections. This is ideal for a loudspeaker in the living room and not only there!
The vertical dispersion, the fading out, is extraordinarily even. At the optimum listening distance of more than 3.5 m, the listener can lie on the sofa or sit on a bar stool without significant signal distortions clouding the sound image.
The Time's tweeter has a tall, narrow diaphragm. Its sound radiation is vertically stronger and horizontally less directed. The reproduced signal shapes (input = output) are excellent under horizontal listening angles. In practice, this means that the listeners in their living room can sit widely spread on their seating furniture.

Concept

  • Type: floorstanding loudspeaker
  • way: 3,5
  • Cabinet: closed
  • Dimensions (H x W x D) = 144 cm x 26 cm x 73.3 cm

cut-off frequency: (- 3 dB) 27 Hz, (-7 dB) 20 Hz new price: 38000 Euro

Equipment
tweeter: 1 x air motion transformer Mundorf AMT26-Myro-V2
midrange: 2 x Accuton C50-8-043 (special model for myro)
midrange and bass: 4 x ACCUTON C220-6-222

Pictures[edit]

Additional information[edit]

product-description

<zurück: Myro Lautsprecher>
<zurück: Myro>