Aitos EV 802
Contents
Data[edit]
General
- Manufacturer: Aitos
- Model: EV 803
- Year of manufacture: from 1981 (EV 801) to now (EV803)
- Made in: Netherlands
- Color: Black
- Type: Dual Mono Separate Cabinets - Analogue
- Remote control: connector for switching the amplifier on and off via AITOS tube preamps
- Power consumption:
- Standby: 0W
- Idle: 100W
- Full power: 350W
- Dimensions (WxHxD): 35cm x 20cm x 42cm - per monoblock
- Weight: 14 kg per amplifier
- New price approx.: 12.500€
Connections
- Number of inputs: Cinch - 2 x parallel (gold plated)
Cinch gold-plated: 270kOhm 1.5V eff.
- Number of outputs: 2 x parallel WBT (gold plated) for bi-wiring
- LS-Stereo A: 8 to 16Ohm automatic adjustment
- LS-Stereo B: 8 to 16Ohm automatic matching
Technical Data
- Continuous power (at distortion factor)
- 10 Ohm: 120W
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: < 0,25 %
- Dämpfungsfaktor: >100
- Frequency response: 12Hz - 225kHz -3db
- Signal to noise ratio: >100db
- Stereo channel separation: Dependent on preamplifier
Special features of tube amplifiers
- Principle: OTL-tube endmonos
- Tube equipment
- 4 power tubes
- 3 double triodes
1 pentode
- Transformers: One high voltage/heating transformer and one transformer for the automatic switching system.
- High voltage/heating
- Auxiliary voltage
Special equipment
- Diagnostic socket (service) for checking internal voltages.
- Input connector for switching the power amplifier on and off via AITOS tube preamplifiers
- Led indicators for remote control and fuse fault indication
- Built-in mains phase control.
- Three-dimensional wiring
- Delay of the anode voltage at power up
- Built-in hour meter
Remarks[edit]
Other models in the same series: Aitos OTL Power Amplifier EV 903
Pictures[edit]
