Difference between revisions of "Nakamichi SR-4 E"

 
 
(16 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 
__NOTOC__
 
__NOTOC__
== Daten ==
+
== Data ==
{{Navigation}}
+
{{navigation}}
'''Allgemein'''
+
'''General'''
* Hersteller: [[Nakamichi]]
+
* Manufacturer: [[Nakamichi]]
* Modell: SR-4E
+
* Model: SR-4E
* Baujahre: um 1988-1990
+
* Type: Receiver
* Hergestellt in: Japan
+
* Years of manufacture: 1988 - 1990
* Farbe: schwarz
+
* Made in: Japan
* Fernbedienung: nein
+
* Color: Black
* Leistungsaufnahme: max. 350W
+
* Remote control: no
* Abmessungen: 430 x 100 x 370 mm (BxHxT)
+
* Power consumption: max. 350 W
* Gewicht: 9,8 kg
+
* Dimensions (WxHxD): 430 x 100 x 370 mm  
* Neupreis ca.:  
+
* Weight: 9.8 kg
 +
* Original price approx.: 2'500 DM
  
  
'''Anschlüsse'''
+
'''Connections'''
* Anzahl der Eingänge:
+
* Number of inputs:
 
** 2x Video/Aux (200 mV, 20 kOhm)
 
** 2x Video/Aux (200 mV, 20 kOhm)
** 1x VCR/Tape2 (200 mV, 20 kOhm)
+
1x VCR/Tape2 (200 mV, 20 kOhm)
** 1x Tape In (200 mV, 20 kOhm)
+
1x Tape In (200 mV, 20 kOhm)
** 1x CD In (200 mV, 20 kOhm)
+
1x CD In (200 mV, 20 kOhm)
** Phono (MM 140 mV; 47kOhm / MC 3/8 mV; 100 Ohm )
+
Phono (MM 140 mV; 47kOhm / MC 3/8 mV; 100 Ohm )
** FM-Antenne (75/300 Ohm)
+
** FM antenna (75/300 Ohm)
** AM-Antenne
+
** AM antenna
* Anzahl der Ausgänge:
+
* Number of outputs:
 
** 1x Tape Out
 
** 1x Tape Out
 
** 1x Video/Tape2 Out
 
** 1x Video/Tape2 Out
 
** 1x Monitor Out
 
** 1x Monitor Out
** Kopfhörer (6,3mm Klinke)
+
** Headphones (6,3mm jack)
** 2 Lautsprecherpaare
+
** 2 pairs of speakers
 
 
 
** Processor Loop OUT/IN f. Equalizer/ Surround
 
** Processor Loop OUT/IN f. Equalizer/ Surround
  
  
'''Technische Daten'''
+
'''Technical Data'''
 
 
''Verstärker''
 
* Sinus Dauerleistung
 
** 8 Ohm: 2x 60 W (DIN),
 
  
* Impulsleistung
+
''Amplifier''
 +
* Sine continuous power
 +
8 Ohm: 2x 60 W (DIN),
 +
* pulse power
 
** 8 Ohm: 2x 85W
 
** 8 Ohm: 2x 85W
 
** 4 Ohm: 2x 125W
 
** 4 Ohm: 2x 125W
* Gesamtklirrfaktor: 0,1% (bei Nennleistung)
+
* Total harmonic distortion: 0.1% (at nominal power)
* Dämpfungsfaktor: 77 (8 Ohm)
+
* Attenuation factor: 77 (8 Ohm)
* Frequenzgang: 20 - 20.000 Hz (+0; -1 dB, Deutschlandmodell)
+
* Frequency response: 20 - 20,000 Hz (+0; -1 dB, Germany model)
* Frequenzgang: 20 - 20.000 Hz (+0; -0,5 dB, sonnst
+
* Frequency response: 20 - 20,000 Hz (+0; -0.5 dB, Germany model)
* Frequenzgang: 5 - 45.000 Hz (+0; -3 dB, Deutschlandmodell)
+
* Frequency response: 5 - 45,000 Hz (+0; -3 dB, Germany model)
* Frequenzgang: 5 - 75.000 Hz (+0; -3 dB, sonnst)
+
* Frequency response: 5 - 75,000 Hz (+0; -3 dB, otherwise)
* Signalrauschabstand:
+
* Signal-to-noise ratio:
** Phono: besser 78 dB MM; 71 dB MC
+
** Phono: better 78 dB MM; 71 dB MC
** Endstufe: besser 105 dB  
+
** Power amplifier: better 105 dB  
* Klangregelung:
+
* Tone control:
** Bass: ja
+
** Bass: yes
** Mitten: nein
+
** Mids: no
** Höhen: ja
+
treble: yes
* Loudness: variabel Loudness
+
* Loudness: variable Loudness
* Subsonic: Ja
+
* Subsonic: yes
* Mute: Ja
+
* Mute: Yes
 
* Direct/Line-Straight:  
 
* Direct/Line-Straight:  
* Stereokanaltrennung:
+
 
  
 
''Tuner''
 
''Tuner''
* Empfang: UKW, MW
+
* Reception: FM, MW
* Frequenzen:
+
* Frequencies:
** UKW: 87,4 - 108 MHz
+
** FM: 87.4 - 108 MHz
 
** MW: 515 - 1.611 kHz  
 
** MW: 515 - 1.611 kHz  
* Frequenzgang: 20 - 15000 Hz  
+
* Frequency response: 20 - 15,000 Hz  
* Eingangsmpfindlichkeit:
+
* Input sensitivity:
** UKW:
+
** FM Mono: 23 dBf / 7.7 müV
** MW:  
+
VHF Stereo: 43 dBf / 77.4 müV
* Klirrfaktor UKW: kleiner 0,2%
+
MW: 53 dB mü/m 
* Klirrfaktor MW: kleiner 0,3%
+
Distortion factor FM: less than 0.2  
* Signalrauschabstand: 74 dB (Mono), 69 dB (Stereo)
+
Distortion factor MW: less than 0.3
* Fremdspannungsabstand:  
+
Signal-to-noise ratio: 74 dB (mono), 69 dB (stereo)
* Kanaltrennung: besser 43 dB (1kHz)
+
* Signal-to-noise ratio:  
* Trennschärfe UKW: 70 dB (+/-300kHz)
+
* Channel separation: better 43 dB (1kHz)
* Trennschärfe MW : 20 dB (+/-9kHz)
+
* selectivity FM: 70 dB (+/-300kHz)
* Gleichwellenselektion: 2.0 dB
+
* selectivity MW : 20 dB (+/-9kHz)
* Nebenwellenunterdrückung: besser 90dB
+
* Co-wave selection: 2.0 dB
* Spiegelfrequenzdämpfung: besser 75 dB
+
* Spurious suppression: better 90 dB
* ZF-Dämpfung: besser 80dB
+
* IF attenuation: better 75 dB
* AM-Unterdrückung: besse 60 dB
+
* IF attenuation: better 80 dB
* Ausgangspegel:
+
* AM rejection: better 60 dB
* RDS: nein
+
* Output level:
* Stationsspeicher: 10
+
* RDS: no
 +
* Station memory: 10
 +
 
 +
 
 +
'''Special Features'''
 +
* Remote control
 +
 
 +
 
 +
== Remarks ==
 +
* Other models in the same series:
 +
* [[Nakamichi SR-2 E]]
 +
* [[Nakamichi SR-3 E]]
 +
* [[Nakamichi SR-4 E]]
 +
 
 +
 
 +
* [[Successor series:
 +
* [[Nakamichi TA-2 E]]
 +
* [[Nakamichi TA-3 E]]
 +
* [[Nakamichi TA-4 E]]
 +
 
  
 +
* STASIS - circuit licensed to [[Threshold|Threshold Co.]]
  
'''Besondere Ausstattungen'''
 
* Fernbedienung
 
  
 +
== Pictures ==
  
== Bemerkungen ==
 
Weitere Modelle der gleichen Serie: SR2-E; SR3-E
 
Nachfolgeserie: TA2-E ..TA4-E
 
  
STASIS - Schaltung in Lizenz Threshold Co.
+
== Reports ==
 +
* Rainer Kruse at hifi-classic-reparatur.de (April 2, 2014), see also link below:
 +
* "The Stasis circuit developed by Threshold, guarantor for load stable power supply in the low impedance power range, worked in the well-known power amplifiers, and in the flat receivers!".
  
== Bilder ==
+
The SR-2,3 and 4 receivers, the SR-4 even remote controllable, had a good sounding phono section (the 2 unfortunately only MM) and of course an excellent tuner built in.
 +
Sound-wise, these parts tend to have a natural low and wide, rather than high, stage.
 +
* An SR-4 sounds much more natural than, say, an [[Accuphase E-206]], which plays louder and bigger, but much less musical.
 +
Details are beautifully resolved with an emphasis on subtleties and textures, analytical in the best sense.
 +
* At the same time the parts still look smart and are well adjustable, just no debris.<br />
 +
* If you get your hands on a semi-maintained unit today, after more than 20 years, they run flawlessly. A manufacturing quality that the Europeans and Yanks were running after!"
 +
 
 +
 
 +
* Report in "FonoForum" 7 / 1988
  
== Berichte ==
 
  
 
== Links ==
 
== Links ==
 +
* [https://hifi-classic-reparatur.de/2014/04/nakamichi-eben-nicht-nur-tape-decks/ Nakamichi SR receiver review with nice catalogue picture at hifi-classic-reparatur.de] from April 2, 2014, retrieved December 17, 2017.
 +
 +
  
[[Kategorie:Receiver]]
+
[[Category:Receiver]]

Latest revision as of 13:59, 21 April 2020

Data[edit]

General

  • Manufacturer: Nakamichi
  • Model: SR-4E
  • Type: Receiver
  • Years of manufacture: 1988 - 1990
  • Made in: Japan
  • Color: Black
  • Remote control: no
  • Power consumption: max. 350 W
  • Dimensions (WxHxD): 430 x 100 x 370 mm
  • Weight: 9.8 kg
  • Original price approx.: 2'500 DM


Connections

  • Number of inputs:
    • 2x Video/Aux (200 mV, 20 kOhm)

1x VCR/Tape2 (200 mV, 20 kOhm) 1x Tape In (200 mV, 20 kOhm) 1x CD In (200 mV, 20 kOhm) Phono (MM 140 mV; 47kOhm / MC 3/8 mV; 100 Ohm )

    • FM antenna (75/300 Ohm)
    • AM antenna
  • Number of outputs:
    • 1x Tape Out
    • 1x Video/Tape2 Out
    • 1x Monitor Out
    • Headphones (6,3mm jack)
    • 2 pairs of speakers
    • Processor Loop OUT/IN f. Equalizer/ Surround


Technical Data

Amplifier

  • Sine continuous power

8 Ohm: 2x 60 W (DIN),

  • pulse power
    • 8 Ohm: 2x 85W
    • 4 Ohm: 2x 125W
  • Total harmonic distortion: 0.1% (at nominal power)
  • Attenuation factor: 77 (8 Ohm)
  • Frequency response: 20 - 20,000 Hz (+0; -1 dB, Germany model)
  • Frequency response: 20 - 20,000 Hz (+0; -0.5 dB, Germany model)
  • Frequency response: 5 - 45,000 Hz (+0; -3 dB, Germany model)
  • Frequency response: 5 - 75,000 Hz (+0; -3 dB, otherwise)
  • Signal-to-noise ratio:
    • Phono: better 78 dB MM; 71 dB MC
    • Power amplifier: better 105 dB
  • Tone control:
    • Bass: yes
    • Mids: no

treble: yes

  • Loudness: variable Loudness
  • Subsonic: yes
  • Mute: Yes
  • Direct/Line-Straight:


Tuner

  • Reception: FM, MW
  • Frequencies:
    • FM: 87.4 - 108 MHz
    • MW: 515 - 1.611 kHz
  • Frequency response: 20 - 15,000 Hz
  • Input sensitivity:
    • FM Mono: 23 dBf / 7.7 müV

VHF Stereo: 43 dBf / 77.4 müV MW: 53 dB mü/m Distortion factor FM: less than 0.2 Distortion factor MW: less than 0.3 Signal-to-noise ratio: 74 dB (mono), 69 dB (stereo)

  • Signal-to-noise ratio:
  • Channel separation: better 43 dB (1kHz)
  • selectivity FM: 70 dB (+/-300kHz)
  • selectivity MW : 20 dB (+/-9kHz)
  • Co-wave selection: 2.0 dB
  • Spurious suppression: better 90 dB
  • IF attenuation: better 75 dB
  • IF attenuation: better 80 dB
  • AM rejection: better 60 dB
  • Output level:
  • RDS: no
  • Station memory: 10


Special Features

  • Remote control


Remarks[edit]




Pictures[edit]

Reports[edit]

  • Rainer Kruse at hifi-classic-reparatur.de (April 2, 2014), see also link below:
  • "The Stasis circuit developed by Threshold, guarantor for load stable power supply in the low impedance power range, worked in the well-known power amplifiers, and in the flat receivers!".

The SR-2,3 and 4 receivers, the SR-4 even remote controllable, had a good sounding phono section (the 2 unfortunately only MM) and of course an excellent tuner built in. Sound-wise, these parts tend to have a natural low and wide, rather than high, stage.

  • An SR-4 sounds much more natural than, say, an Accuphase E-206, which plays louder and bigger, but much less musical.

Details are beautifully resolved with an emphasis on subtleties and textures, analytical in the best sense.

  • At the same time the parts still look smart and are well adjustable, just no debris.
  • If you get your hands on a semi-maintained unit today, after more than 20 years, they run flawlessly. A manufacturing quality that the Europeans and Yanks were running after!"


  • Report in "FonoForum" 7 / 1988


Links[edit]