Difference between revisions of "Lexicon Bandwidth"

(Ersteintrag)
 
m (Link)
 
Line 1: Line 1:
Angabe eines [[Lexikon Frequenz|Frequenz]]bereichs in dem ein Gerät oder Bauteil arbeitet.
+
Specification of a [[Lexicon Frequency|Frequency]]range in which a device or component operates.
  
Bei [[Lexikon Filter|Filtern]] wird dazu die untere und obere Grenzfrequenz angegeben, das sind die Frequenzen bei denen das Signal um 3[[Lexikon dB|dB]] abgeschwächt wird. Zwischen diesen Grenzfrequenzen ist die [[Lexikon Abschwächung|Abschwächung]] geringer ([[Lexikon Bandpass|Bandpass]]).
+
For [[Lexicon Filter|Filters]], the lower and upper [[Lexicon Cutoff Frequency|Cutoff Frequency]] are specified, which are the frequencies at which the signal is attenuated by 3[[Lexicon dB|dB]]. Between these cutoff frequencies, the [[dictionary attenuation|attenuation]] is lower ([[dictionary bandpass|bandpass]]).
  
Bei Radiosendern ist die Bandbreite durch die untere und obere Grenzfrequenz des abgestrahlten Signals definiert. Meist liegen diese symmetrisch um die [[Lexikon Trägerfrequenz|Trägerfrequenz]], und die Bandbreite bestimmt sich aus der Art der [[Lexikon Modulation|Modulation]].
+
For radio transmitters, the bandwidth is defined by the lower and upper cut-off frequencies of the radiated signal. Usually these are symmetrical about the [[dictionary carrier frequency|carrier frequency]], and the bandwidth is determined by the type of [[dictionary modulation|modulation]].
  
Siehe auch:
+
See also:
* Wikipedia-Artikel [http://de.wikipedia.org/wiki/Bandbreite Bandbreite]
+
* Wikipedia article [[http://de.wikipedia.org/wiki/Bandbreite bandwidth]]
  
[[Kategorie:Lexikon]]
+
[[Category:Encyclopedia]]

Latest revision as of 04:40, 23 June 2006

Specification of a Frequencyrange in which a device or component operates.

For Filters, the lower and upper Cutoff Frequency are specified, which are the frequencies at which the signal is attenuated by 3dB. Between these cutoff frequencies, the attenuation is lower (bandpass).

For radio transmitters, the bandwidth is defined by the lower and upper cut-off frequencies of the radiated signal. Usually these are symmetrical about the carrier frequency, and the bandwidth is determined by the type of modulation.

See also: