Difference between revisions of "Akai AA-8000"
| (6 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Akai]] |
| − | * | + | * Model: AA-8000 |
| − | * | + | * Type: Receiver with built-in keyboard for tape remote control in the front |
| − | * | + | * Years of manufacture: 1970 - 1972 |
| − | * | + | * Made in: Japan |
| − | * | + | * Color: silver, housing wood, walnut |
| − | * | + | * Power consumption: 200 W max. 30 W without signal |
| − | * | + | * Dimensions (WxHxD): 460 x 140 x 355 mm |
| − | * | + | * Weight: 15 kg |
| + | * Original price approx.: 1'550 DM | ||
| − | ''' | + | '''Connections:''' |
| − | * | + | * Number of inputs: |
** Phono MM: 3 mV, 50 kOhm | ** Phono MM: 3 mV, 50 kOhm | ||
** AUX: 150 mV, 50 kOhm | ** AUX: 150 mV, 50 kOhm | ||
| − | + | Tape Play: 150 mV, 100 kOhm | |
| − | + | Tape Play DIN: 150 mV, 100 kOhm | |
| − | ** | + | ** Antenna: 75 Ohm, 300 Ohm |
| − | * | + | * Number of outputs: |
** Tape Rec: 140 mV | ** Tape Rec: 140 mV | ||
| − | + | Tape Rec DIN: 24 mV | |
| − | ** | + | ** Headphones: 8 - 16 Ohm |
| − | ** 2 | + | ** 2 pairs of loudspeakers |
| − | ''' | + | '''Technical Data''' |
| − | '' | + | ''Amplifier'' |
| − | * | + | * Continuous power (at distortion) |
| − | + | 8 Ohm: 2x 45 W | |
** 4 Ohm: | ** 4 Ohm: | ||
| − | * | + | * Dynamic power |
** 8 Ohm: 2x 60 W | ** 8 Ohm: 2x 60 W | ||
** 4 Ohm: | ** 4 Ohm: | ||
| − | * | + | * Total harmonic distortion: 0.3 % at 45 W |
| − | * | + | * Attenuation factor: |
| − | * | + | * Frequency response: 20 - 50,000 Hz, - 3 dB |
| − | * | + | * Signal-to-noise ratio: |
** Phono: 60 dB | ** Phono: 60 dB | ||
** AUX: 70 dB | ** AUX: 70 dB | ||
| − | * | + | * Tone control: |
| − | ** Bass: ± 10 dB | + | ** Bass: ± 10 dB at 100 Hz |
| − | ** | + | ** Tweeter: ± 10 dB at 10 kHz |
| − | * Loudness: | + | * Loudness: yes, + 6 dB at 100 Hz, + 6 dB at 10 kHz |
| − | * Low Filter (Subsonic): | + | * Low Filter (Subsonic): yes, - 9 dB at 100 Hz |
| − | * High Filter: | + | * High Filter: yes, - 5 dB at 10 kHz |
| − | * Muting: | + | * Muting: yes |
''Tuner'' | ''Tuner'' | ||
| − | * | + | * Reception: FM/MW |
| − | * | + | * Frequencies: |
| − | ** | + | ** FM: 88 - 108 MHz |
** MW: 535 - 1605 KHz | ** MW: 535 - 1605 KHz | ||
| − | * | + | * Input sensitivity: |
| − | ** | + | ** FM: 2.0µV |
** MW: 50µV | ** MW: 50µV | ||
| − | * | + | * Frequency range: |
| − | * | + | * Distortion factor: 0.3% (mono), 0.8% (stereo). |
| − | * | + | * Signal-to-noise ratio: 70 dB |
| − | * | + | * Channel separation: > 40 dB |
| − | * | + | * Selectivity: 65 dB |
| − | * | + | * Co-wave selection: 1.5 dB |
| − | * | + | * Spurious wave selection: 34 dB |
| − | * | + | * Image frequency attenuation: > 100 dB |
| − | * | + | * IF attenuation: > 100 dB |
| − | * AM | + | * AM suppression: 55 dB |
| − | ''' | + | '''Special Features''' |
| − | * | + | * Receiver with built-in keyboard for tape remote control in the front panel |
| − | + | * FM muting | |
| − | |||
| − | |||
| − | |||
| − | * | ||
| − | == | + | == Remarks == |
| − | * | + | * Other models in the same series: |
* [[Akai AA-6300|AA-6300]] | * [[Akai AA-6300|AA-6300]] | ||
* [[Akai AA-6600|AA-6600]] | * [[Akai AA-6600|AA-6600]] | ||
| Line 89: | Line 86: | ||
| − | * | + | * [[Corresponding Reel Tape]] |
* [[Akai GX-365 D|GX-365 D]] | * [[Akai GX-365 D|GX-365 D]] | ||
| − | == | + | == Pictures == |
| − | * | + | * Excerpt from brochure: Akai AA-8000 receiver with built-in keyboard for complete tape remote control in front Right |
| − | [[ | + | [[File:Akai AA-8000-1.jpg]] |
| − | == | + | == Reports == |
== Links == | == Links == | ||
| − | [[ | + | [[Category:Receiver]] |
Latest revision as of 11:06, 3 April 2018
Data[edit]
General
- Manufacturer: Akai
- Model: AA-8000
- Type: Receiver with built-in keyboard for tape remote control in the front
- Years of manufacture: 1970 - 1972
- Made in: Japan
- Color: silver, housing wood, walnut
- Power consumption: 200 W max. 30 W without signal
- Dimensions (WxHxD): 460 x 140 x 355 mm
- Weight: 15 kg
- Original price approx.: 1'550 DM
Connections:
- Number of inputs:
- Phono MM: 3 mV, 50 kOhm
- AUX: 150 mV, 50 kOhm
Tape Play: 150 mV, 100 kOhm Tape Play DIN: 150 mV, 100 kOhm
- Antenna: 75 Ohm, 300 Ohm
- Number of outputs:
- Tape Rec: 140 mV
Tape Rec DIN: 24 mV
- Headphones: 8 - 16 Ohm
- 2 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power (at distortion)
8 Ohm: 2x 45 W
- 4 Ohm:
- Dynamic power
- 8 Ohm: 2x 60 W
- 4 Ohm:
- Total harmonic distortion: 0.3 % at 45 W
- Attenuation factor:
- Frequency response: 20 - 50,000 Hz, - 3 dB
- Signal-to-noise ratio:
- Phono: 60 dB
- AUX: 70 dB
- Tone control:
- Bass: ± 10 dB at 100 Hz
- Tweeter: ± 10 dB at 10 kHz
- Loudness: yes, + 6 dB at 100 Hz, + 6 dB at 10 kHz
- Low Filter (Subsonic): yes, - 9 dB at 100 Hz
- High Filter: yes, - 5 dB at 10 kHz
- Muting: yes
Tuner
- Reception: FM/MW
- Frequencies:
- FM: 88 - 108 MHz
- MW: 535 - 1605 KHz
- Input sensitivity:
- FM: 2.0µV
- MW: 50µV
- Frequency range:
- Distortion factor: 0.3% (mono), 0.8% (stereo).
- Signal-to-noise ratio: 70 dB
- Channel separation: > 40 dB
- Selectivity: 65 dB
- Co-wave selection: 1.5 dB
- Spurious wave selection: 34 dB
- Image frequency attenuation: > 100 dB
- IF attenuation: > 100 dB
- AM suppression: 55 dB
Special Features
- Receiver with built-in keyboard for tape remote control in the front panel
- FM muting
Remarks[edit]
Pictures[edit]
- Excerpt from brochure: Akai AA-8000 receiver with built-in keyboard for complete tape remote control in front Right
