Omnitronic P-1000

Brand: Omnitronic

Model: P-1000

Number of channels: 2

Technical data

• Voltage supply: 115/230 V AC, 50/60 Hz
• Voltage stability: 230 V ± 10 % (206 V - 253 V)
• Total connected load (max.): 1300 W
• Short-term peak power at 1 KHz: 1270 W / 4 Ohm
• Output power sine:
  • Stereo 4 Ohm 2 x 500 W

Stereo 8 Ohm 2 x 245 W 8 Ohm bridged 1 x 850 W Frequency range: 22 - 31 000 Hz Attenuation factor: > 200 distortion factor: 0.01

• Noise voltage ratio: 108 dB
• Cooling: 2 fans (start at approx. 40°C)
• Channel separation (at 1 KHz): 89 dB
• Minimum input voltage: 0.77 V/26 dB/1.44 V
• Input impedance:
  • 12 kOhm (unbalanced).
  • 22 kOhm (balanced)
• Inputs:
  • 2 x XLR

2 x jack outputs:

• • 2 x Speaker (Stereo)

1 x speaker (bridge)

• • 2 x banana/screw combination
• Controls:
  • Mains switch

Volume control (one per channel)

• • Operation selector switch-Stereo/Parallel/Bridged,
  • Ground Lift
  • Bridged switch for bridged operation
• Input level select (0.77 V/26 dB/1.44 V)
• Protection circuit: short-circuit protection circuit, DC voltage protection circuit, thermal protection circuit, soft start
• All operating states can be read via LEDs
• LED intensity adjustable via brightness control on the rear panel
• Dimensions (W x D x H): 440 x 482 x 100 mm

Remarks

Further models of the same series:

Pictures