Omnitronic P-1000
Brand: Omnitronic
Model: P-1000
Number of channels: 2
Technical data[edit]
- Voltage supply: 115/230 V AC, 50/60 Hz
- Voltage stability: 230 V ± 10 % (206 V - 253 V)
- Total connected load (max.): 1300 W
- Short-term peak power at 1 KHz: 1270 W / 4 Ohm
- Output power sine:
- Stereo 4 Ohm 2 x 500 W
Stereo 8 Ohm 2 x 245 W 8 Ohm bridged 1 x 850 W Frequency range: 22 - 31 000 Hz Attenuation factor: > 200 distortion factor: 0.01
- Noise voltage ratio: 108 dB
- Cooling: 2 fans (start at approx. 40°C)
- Channel separation (at 1 KHz): 89 dB
- Minimum input voltage: 0.77 V/26 dB/1.44 V
- Input impedance:
- 12 kOhm (unbalanced).
- 22 kOhm (balanced)
- Inputs:
- 2 x XLR
2 x jack outputs:
- 2 x Speaker (Stereo)
1 x speaker (bridge)
- 2 x banana/screw combination
- Controls:
- Mains switch
Volume control (one per channel)
- Operation selector switch-Stereo/Parallel/Bridged,
- Ground Lift
- Bridged switch for bridged operation
- Input level select (0.77 V/26 dB/1.44 V)
- Protection circuit: short-circuit protection circuit, DC voltage protection circuit, thermal protection circuit, soft start
- All operating states can be read via LEDs
- LED intensity adjustable via brightness control on the rear panel
- Dimensions (W x D x H): 440 x 482 x 100 mm
Remarks[edit]
Further models of the same series:
Pictures[edit]
