Marantz 2238BL
Data
General
- Manufacturer: Marantz
- Model: 2238BL
- Years of manufacture: 1977 - 1979
- Made in: Japan
- Color: silver, black (wooden cabinet WC-122)
- Remote control: no
- Power consumption: 170 W
- Dimensions: 440 x 137 x 365 mm (WxHxD)
- Weight: 12,5 kg
- New price approx:
Connections
- Number of inputs:
- 2x Phono: 1.8 mV / 47 kOhm.
2x Tape In, Aux: 180 mV / 20 kOhm
- Main In
- Antenna FM (75/300 Ohm) / MW
- Number of outputs:
- 2x Tape Out
- Pre Out
- Headphones (6.3 mm jack, front)
- 2 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power: (20-20,000 Hz, <0.08%, RMS).
8 Ohm: 2x 38 W 4 Ohm: 2x 48 W
- Dynamic power:
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.08%
- Attenuation factor: 50 (8 Ohm)
- Frequency response:
- Aux, Main In: 10 - 40,000 Hz (±1 dB).
Phono: RIAA ±1 dB Signal-to-noise ratio:
- Aux: 90 dB
Phono: 76 dB
- Stereo Channel Separation:
- Tone control: (each L/R separate)
- Bass: yes
Mids: yes treble: yes
- Loudness: yes
- High Filter: 5 kHz (6 dB/oct)
- Low Filter (Subsonic): yes
- Mute: FM Muting
- Direct/Line-Straight: no
Tuner
- Reception: FM, MW, LW
- Frequencies:
- FM: 87.5 - 108 MHz
- MW: 525 - 1,605 kHz
LW: 150 - 350 kHz
- Frequency Response:
- Input sensitivity:
- FM: 1.6 µV
- MW: 25 µV
LW: 250 µV
- Distortion factor:
- Signal-to-noise ratio:
- Signal-to-noise ratio FM: 65 dB (mono), 58 dB (stereo)
- Signal-to-noise ratio VHF: 68 dB (mono), 62 dB (stereo)
- MW:
- Channel separation:
- Selectivity:
- Co-wave selection:
- Spurious wave selection:
- IF attenuation:
- IF attenuation:
- AM suppression:
- Output level:
- RDS: no
- Station memory: no
Special Features
- Wooden cabinet: WC-122
Remarks
- A Dolby FM decoder can be added to the American version.
- As 2238B also built without long wave tuner.
Other models of the same series: