Fisher 175
Data
General
- Manufacturer: Fisher
- Model: 175
- Type: Receiver
- Years of manufacture: 1969 - 1971
- Made in: Japan
- Color: Silver, housing either metal or wood
- Remote control:
- Power consumption: 160 W max. 30 W rest.
- Dimensions: 393 x 133 x 324 mm (WxHxD)
- Weight: 8.2 kg
- Original price approx.: 1'298 DM
Connections
- Number of inputs:
- Phono (MM): 3.5 mV / 50 kOhm
Aux: 155 mV / 100 kOhm
- Tape Play: 155 mV / 100 kOhm
- Tape Play DIN: 155 mV / 100 kOhm
- Number of outputs:
- Tape Rec: 155 mV / 2.2 kOhm
- Tape Rec DIN: 4 mV / 10 kOhm
- Headphones: 5 V, 100 Ohm
- 2 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power (at distortion)
8 Ohm: 2 x 32 W
- 4 Ohm:
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.05 %
- Attenuation factor: 50 (8 Ohm)
- Frequency response: 10 Hz - 50 KHz
- Signal-to-noise ratio:
- Phono: 65 dB
Tape, Aux: 85 dB
- Tone control:
- Bass: ± 10 dB at 100 Hz
Treble: ± 10 dB at 10 kHz
- Loudness: + 8 dB at 100 Hz, + 4 dB at 10 kHz
- High Filter: no
- Low Filter (Subsonic): no
- Mute:
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87.5 - 108 MHz
- MW: 520 - 1605 kHz
- Input sensitivities:
- FM mono: 0.9 µV
- FM stereo: 4.0 µV
- MW: 300 µV
Distortion factor:
- Mono: 0.2 %
Stereo: 0.5
- Frequency response: 20 - 15'000 Hz, - 1 dB
- Signal-to-noise ratio:
- Mono: 65 dB
- Stereo: 60 dB
- Channel separation: 65 dB
- Selectivity: 65 dB
- Co-wave selection: 1.2 dB
- Spurious selection: 75 dB
- Image frequency attenuation: 56 dB
- IF attenuation: 80 dB
- AM suppression: 56 dB
Special Features
- VHF local
Remarks
- Other models in the same series:
Pictures
- Image: Fisher 175
