Akai AA-930
Data
General
- Manufacturer: Akai
- Model: AA-930
- Type: Receiver
- Years of manufacture: 1973 - 1975
- Made in: Japan
- Color: silver, housing walnut
- Remote control: no
- Power consumption:
- Dimensions (WxHxD): 483 x 168 x 398 mm.
- Weight: 15 kg
- Original price approx.: 1'200 DM
Connections
- Number of inputs: 4
- Phono: 2.2 mV
- Microphone: 1,5 mV
- Tape 1, 2: 110 mV
- Aux: 110 mV
- Number of outputs:
- Tape RCA: 150 mV
Tape DIN: 30 mV
- 3 pairs of speakers
Technical Data
Amplifier
- Continuous power (at distortion)
8 Ohm: 2x 42 W 4 Ohm: 2x 60 W
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.5 %
- Attenuation factor:
- Frequency response: 20 - 50'000Hz
- Signal to noise ratio:
- Phono: better than -33dB
Mic: better than -33dB Tape: better than -43dB Aux: better than -43dB
- Stereo channel separation: better than 50dB (Phono, 1kHz)
- Tone control:
- Bass: +/-10dB/100Hz
Treble: +/- 10dB/10kHz
- Loudness: 7dB/100HZ, 5dB/10kHz
- High Filter: -9dB/10kHz
- Low Filter (Subsonic): -6dB/50Hz
- Mute: -21dB/1kHz
- Direct/Line-Straight: no
Tuner
- Reception: FM, AM
- Frequencies:
- FM: 86..109Mhz +/-1MHz.
- MW: 525+/-5kHz..1650+/-20kHz
- Frequency Response:
- Input sensitivity:
- FM: 1.7µV, min. 2.8µV (IHF), stereo <20µV
- MW: 250µV
- Klirrfaktor:
- stereo: 0,6%, max. 1,5%
- mono: 0,2%, max. 0,5%
- Signalrauschabstand: 70dB
- stereo: besser als 50dB
- mono: besser als 60dB
- Kanaltrennung: 40dB, mind. 35dB
- Trennschärfe: >80dB.
- Co-wave selection:
- Spurious wave selection:
- IF attenuation:
- IF attenuation: >100dB
- AM suppression: >45dB
Special Features
- Inputs for two mono microphones
Remarks
- All models in the same series:
Pictures
- Image: Akai AA-930
Reviews
Links
</20µV>