Akai AA-940
Data[edit]
General
- Manufacturer: Akai
- Model: AA-940
- Type: Receiver
- Years of manufacture: 1973 - 1975
- Made in: Japan
- Color: silver, housing walnut
- Remote control: no
- Power consumption: max. 360 W
- Dimensions (WxHxD): 483 x 168 x 398 mm
- Weight: 15,5 kg
- Original price approx.: 99'000 Yen (Japan, 1973), corresponds to about 1'500 DM
Connections
- Number of inputs: 4
- Phono: 2,8mV
- Mic: 2,0mV
- 2x Tape: 140mV
- Aux: 140mV
- Number of outputs:
- Tape RCA: 150mV
Tape DIN: 30mV
- Loudspeaker A, B, C
Technical Data
Amplifier
- Continuous power (at distortion)
- 8 Ohm: 2x 66 W (RMS, 20 - 20'000 Hz, 0,5%), 2x 70 W (1 kHz)
- 4 Ohm: 2x 90 W
- Dynamic power
- 8 Ohm: 180 W
- 4 Ohm: 270 W
- Total harmonic distortion: 0.03 %
- Attenuation factor:
- Frequency response: 10 - 50'000Hz
- Signal to noise ratio:
- Phono: better than -33dB
Mic: better than -33dB Tape: better than -43dB Aux: better than -43dB
- Stereo channel separation: better than 50dB (phono, 1kHz)
- Tone control:
- Bass: +/-10dB/100Hz
Treble: +/- 10dB/10kHz
- Loudness: 7dB/100HZ, 5dB/10kHz
- High Filter: -9dB/10kHz
- Low Filter (Subsonic): -6dB/50Hz
- Mute: -21dB/1kHz
- Direct/Line-Straight: no
Tuner
- Reception: FM, AM
- Frequencies:
- FM: 86..109Mhz +/-1MHz.
- MW: 525+/-5kHz..1650+/-20kHz
- Frequency Response:
- Input sensitivity:
- FM: 1.7µV, min. 2.8µV (IHF), stereo <20µV
- MW: 250µV
- Klirrfaktor:
- stereo: 0,6%, max. 1,5%
- mono: 0,2%, max. 0,5%
- Signalrauschabstand: 70dB
- stereo: besser als 50dB
- mono: besser als 60dB
- Kanaltrennung: 40dB, mind. 35dB
- Trennschärfe: >80dB.
- Co-wave selection:
- Spurious wave selection:
- IF attenuation:
- IF attenuation: >100dB
- AM suppression: >45dB
- Output level:
- RCA: 440mV
DIN: 80mV
Special Features
- Inputs for two mono microphones
Remarks[edit]
- All models in the same series:
Pictures[edit]
- Image: Akai AA-940
Reviews[edit]
Links[edit]
</20µV>