Restek Extract

Data

General

• Manufacturer: Restek
• Model: Extract
• Years of manufacture:
• Made in:
• Color:
  • Housing: black
  • Front: acrylic glass high gloss polished or aluminum black, champagne or silver matt brushed or brass chrome plated.
• Type: Mono power amplifier
• Remote control:
• Power consumption:
• Dimensions: 240 x 155 x 395 mm (W x H x D).
• Weight: 14 kg
• Original price approx:

Connections

• Number of inputs:
  • Input sensitivity: 2 V rms
  • Input impedance: 47 kOhm unbalanced, 10 kOhm balanced.
• Number of outputs:
  • list outputs here

Technical data(according to manufacturer)

• Continuous power (sine)

8 Ohm: 180 Watt 4 Ohm: 300 Watt Dynamic power (music) 8 Ohm: 200 Watt

• • 4 Ohm: 350 Watt
• Rise time: < 2 usec
• Slew Rate: >40 V/usec
• Total harmonic distortion: < 0,007%
• Dämpfungsfaktor: >250 ( 8 Ohm 1kHz )
• Frequency response: 5 Hz - 150 kHz at -3dB
• Signal to noise ratio: > 110 dbA
• Stereo Channel Separation: - - -

Special Features

• The on/off switch is located on the rear panel.
• The front panel is dominated by a large VU meter with switchable backlighting
• The scaling has been optimized for 8-ohm speakers
• Four LED indicators show the operating status of the power amplifier.

Remarks

The EXTRACT is a mono power amplifier from the Fuldbrück-based hi-fi manufacturer RESTEK. The EXTRACT is parallel balanced and has a cascade circuit in the input stage which drives eight output transistors via the driver stage. It can drive loudspeakers up to a minimum impedance of 2 ohms and deliver more than 400 watts.

Other models in the same series:

Pictures

Links

Link to the manufacturer: http://www.restek.de/extract-endstufe/</0,007%></2>