Restek Extract
Data[edit]
General
- Manufacturer: Restek
- Model: Extract
- Years of manufacture:
- Made in:
- Color:
- Housing: black
- Front: acrylic glass high gloss polished or aluminum black, champagne or silver matt brushed or brass chrome plated.
- Type: Mono power amplifier
- Remote control:
- Power consumption:
- Dimensions: 240 x 155 x 395 mm (W x H x D).
- Weight: 14 kg
- Original price approx:
Connections
- Number of inputs:
- Input sensitivity: 2 V rms
- Input impedance: 47 kOhm unbalanced, 10 kOhm balanced.
- Number of outputs:
- list outputs here
Technical data(according to manufacturer)
- Continuous power (sine)
8 Ohm: 180 Watt 4 Ohm: 300 Watt Dynamic power (music) 8 Ohm: 200 Watt
- 4 Ohm: 350 Watt
- Rise time: < 2 usec
- Slew Rate: >40 V/usec
- Total harmonic distortion: < 0,007%
- Dämpfungsfaktor: >250 ( 8 Ohm 1kHz )
- Frequency response: 5 Hz - 150 kHz at -3dB
- Signal to noise ratio: > 110 dbA
- Stereo Channel Separation: - - -
Special Features
- The on/off switch is located on the rear panel.
- The front panel is dominated by a large VU meter with switchable backlighting
- The scaling has been optimized for 8-ohm speakers
- Four LED indicators show the operating status of the power amplifier.
Remarks[edit]
The EXTRACT is a mono power amplifier from the Fuldbrück-based hi-fi manufacturer RESTEK. The EXTRACT is parallel balanced and has a cascade circuit in the input stage which drives eight output transistors via the driver stage. It can drive loudspeakers up to a minimum impedance of 2 ohms and deliver more than 400 watts.
Other models in the same series:
Pictures[edit]
Reports[edit]
Links[edit]
Link to the manufacturer: http://www.restek.de/extract-endstufe/</0,007%></2>