Bose AmPlus 100

Brand: Bose

Model: AmPlus 100

Technical data

• Output power
  • stereo

65 W per channel into 4 ohms

• • • 50 W into 8 Ohm
  • mono
    • 70 V, bridged: 100 W into 49 ohms
    • 100 V, bridged: 100 W into 98 ohms
    • 70 V/4 ohms: 50 W @ 70 V output into 98 ohms
    • 65 W @ channel 2 output into 4 ohms
    • 100 V/4 ohms: 50 W @ 70 V output into 196 ohms
    • 65 W @ channel 2 output into 4 ohms
• Input Sensitivity:
  • 315 mV required to fully drive the amplifier in any mode of operation.
• Input attenuation: 0 dB to -8
• Input/Output Configurations:
  • 1. 2 channels (stereo)
  • 2. mono at 4 ohm load

3. mono at 70V/100V load 4. dual mono (1 source/2 zones)

• • 5. channel 1: 70 V/100 V; channel 2: 4 ohms
• Input impedance:
  • 32 kOhm, balanced

11 kOhm, unbalanced

• Output impedance (line output): 600 ohms
• Distortion (line output): 0.1%
• Frequency response (active equalizer bypassed)

4 ohm outputs: 40 Hz - 16 kHz, ±1 dB 70 V outputs: 60 Hz - 16 kHz, ±1 dB

• Total harmonic distortion at rated output power

4-Ohm Outputs: 1% (40 Hz - 16 kHz) 70 V outputs: 1% (60 Hz - 16 kHz)

• Hum and noise

Line outputs: 92 dB

• • Power amplifier outputs: 80 dB below maximum output power at 4-ohm load
• LED indicator
• Power supply: front panel
• Controls:
  • Input 1 and 2
  • Input attenuation
  • Volume remote control
  • Bass level adjustment 1 and 2
  • Input mode switch

Amplifier Mode Switch

• • Front panel power switch
• Power input

120 V AC, 50/60 Hz, 350 W max 220-240 V AC, 50/60 Hz, 350 W max

• Operating temperature range (passively cooled, top and bottom vents): -10° C to +50° C
• Special features:
  • Volume remote control.
  • Mute on/off switch
  • Clipping detector and limiter
  • Short circuit protection

DC voltage protection Thermal limiting Stable at reactive load

• • High frequency interference protection
  • Internationally approved as safe by UL (6500), CSA (E65) and IEC (65); meets EMC CE standards.

Remarks

Other models in the same series:

Pictures