KS Active 3
Data
General
- Manufacturer: [ [KS]- "Kücke & Schmidt" - AudioTeam ]
- Model: Active 3
- Year of manufacture: 1984
- Made in: Germany
- Colour: oak, wenge, walnut natural, ash, cherry, mahogany, teak, walnut black, walnut white
- Dimensions: 240 x 500 x 325 mm (W x H x D)
- Weight: 16 kg
- Original price approx.: 2800,- DM (UVP pair)
Connections
- Number of inputs:
- NF 2.1V/47 KOhm (at the power amplifier).
- LS 2,1V/1 KOhm (at the preamplifier)
- Number of outputs:
- none
Technical Data
- Type: 3-way compact speaker, closed, active.
- Chassis:
- Low frequency: 200 mm (coated membrane)
Midrange: 51 mm Supronyl dome tweeter Tweeter: 25 mm hardened aluminium dome with Supronyl single voltage Power amplifier: 240 Watt sine wave (IHF)
- Low frequency: 80 Watt sine wave
Midrange: 80 Watt sine wave Tweeter: 80 Watt sine wave
- Frequency response: 37 - 22,000 Hz ±3 dB.
- Transitional ranges: (for multi-chassis LS).
- Input sensitivity: 2.1V / 90dB / 1000Hz
- Maximum power consumption : 360 Watt
Special Features
- 3 built-in power amplifiers --> separately controlled chassis to increase dynamics and resolution.
- Switchable bass attenuation at 38Hz : switch positions 0, 1 and 2 cause a bass level reduction of 0dB, 3dB or 6dB so that room adjustments can be realized.
Compatible with full and power amplifiers, as the 5-pin DIN socket has a contact which is connected via a series resistor. --> Pin.2 = [Ground] ; Pin.4 = [LS+]. --> With a "5Pol-Din to 2 times Cinch" adapter : black/white connection. (the preamplifier operation is done via the red side).
- Intelligent automatic switch-on and switch-off --> The LS only switches on when the frequency mix is below 850Hz, not in case of mains crackling or other interfering signals. Automatic switch-off takes place after an 8-minute signal pause. In addition, the KS Aktiv 3 switches off to protect the drivers in the event of too high a level or voltage peaks and reactivates automatically after a few seconds.
- discrete power amplifiers --> no power amplifier IC's
1% tolerance on metal film resistors; 5% tolerance on film capacitors of the crossovers.
The front of the LS is covered with a velvet-like flocking to avoid sound losses due to reflections and the resulting interference at the baffle.
Optional: A foot stand in matching style and wood finish to extend the placement possibilities of the "power dwarf" designed as a compact or shelf speaker.
Notes
Other models of the same series: