Telefunken RA 200
Daten
Allgemein
- Hersteller: Telefunken
- Modell: RA 200
- Typ: Vollverstärker
- Baujahre: 1981 - 1982
- Neupreis ca.:
- Neupreis komplettes System T-200 ca.: 2'598 DM (Rack 300 DM)
Technische Daten
Datei:Telefunken RA-200-Daten.jpg
Bemerkungen
- Weitere Modelle der gleichen Serie:
- Vollverstärker:
- Telefunken RA 200
- Tuner:
- Telefunken RT 200
- Tape Deck:
- Telefunken RC 200
- Plattenspieler:
- Telefunken RS 200
- Komponente des Systems: Telefunken T-200
Bilder
- Auszug aus Prospekt: Telefunken System T-200 mit RT 200
Datei:Telefunken T-200-Werbung-1981.jpg
Berichte
Links
Device Type
Integrated Amplifier
Start of Sale
1981
General Description
The RA 200 was Telefunken's offering in the 1981 generation when you wanted something better than the RA100. It features more inputs (Cinch sockets for monitor, phono, and aux), a tape-to-tape copying function and a discrete, truly impressive power amp section with a liquid cooling system - see below.
Note that - like in the RR 200 - two sorts of mains transformers were used in the RA 200 that look very different. They are exchangeable, however.
Features 2x70 Watts RMS, 2 pairs of speakers (clamps and DIN connectors), low/high-pass filter, mono/loudness switch, pak level indicators with switchable range, monitor switch, tape-to-tape copying.
Connectors
Magnetic phono/Aux/Monitor (DIN and Cinch), Tuner/Tape (DIN only), 4 x speaker (DIN plugs resp. clamps)
Technical Data:
(taken from the service manual) Nominal Load: 4 Ohms RMS Output Power: 2 x 70 Watts
Peak Output Power: 2 x 100 Watts
Distortion Factor: < 0.1 % at nominal output power
Power Bandwidth: < 6 Hz ... > 50 kHz for K = 0.5 %
Frequency Range: < 5 Hz ... > 50 kHz for +/- 1.5 dB
Phono Deemphasis: acc. to IEC resp. DIN 45336 and 45357
Nominal Input Voltages/ 200 mV/470 kOhm/28 dB (tape)
Nominal Input Impedances/ 200 mV/470 kOhm/28 dB (tuner)
Overdrive Reserve @ 1 kHz 2 mV/47 kOhm/28 bB (phono)
Sound Control: bass: +15 dB/-15 dB @ 40 Hz
presence: +11 dB/-11 dB @ 2 kHz treble: +12 dB/-12 dB @ 15 kHz
Balance Control: + 3 dB to - 12 dB
Semiconductors: 14 integrated circuits
24 transistors 23 diodes 21 LEDs
Power Supply: 220V 50/60Hz Fuses: Mains: 220 V = 1 x T 2 A
Secondary: 4 x T 2.5 A, 2 x T 250 mA, T 315 mA, T 125 mA
Dimensions: 435 x 111 x 350 mm (W/H/D)