Nakamichi SR-4 E

Revision as of 12:59, 21 April 2020 by Hapeg2 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Data

General

  • Manufacturer: Nakamichi
  • Model: SR-4E
  • Type: Receiver
  • Years of manufacture: 1988 - 1990
  • Made in: Japan
  • Color: Black
  • Remote control: no
  • Power consumption: max. 350 W
  • Dimensions (WxHxD): 430 x 100 x 370 mm
  • Weight: 9.8 kg
  • Original price approx.: 2'500 DM


Connections

  • Number of inputs:
    • 2x Video/Aux (200 mV, 20 kOhm)

1x VCR/Tape2 (200 mV, 20 kOhm) 1x Tape In (200 mV, 20 kOhm) 1x CD In (200 mV, 20 kOhm) Phono (MM 140 mV; 47kOhm / MC 3/8 mV; 100 Ohm )

    • FM antenna (75/300 Ohm)
    • AM antenna
  • Number of outputs:
    • 1x Tape Out
    • 1x Video/Tape2 Out
    • 1x Monitor Out
    • Headphones (6,3mm jack)
    • 2 pairs of speakers
    • Processor Loop OUT/IN f. Equalizer/ Surround


Technical Data

Amplifier

  • Sine continuous power

8 Ohm: 2x 60 W (DIN),

  • pulse power
    • 8 Ohm: 2x 85W
    • 4 Ohm: 2x 125W
  • Total harmonic distortion: 0.1% (at nominal power)
  • Attenuation factor: 77 (8 Ohm)
  • Frequency response: 20 - 20,000 Hz (+0; -1 dB, Germany model)
  • Frequency response: 20 - 20,000 Hz (+0; -0.5 dB, Germany model)
  • Frequency response: 5 - 45,000 Hz (+0; -3 dB, Germany model)
  • Frequency response: 5 - 75,000 Hz (+0; -3 dB, otherwise)
  • Signal-to-noise ratio:
    • Phono: better 78 dB MM; 71 dB MC
    • Power amplifier: better 105 dB
  • Tone control:
    • Bass: yes
    • Mids: no

treble: yes

  • Loudness: variable Loudness
  • Subsonic: yes
  • Mute: Yes
  • Direct/Line-Straight:


Tuner

  • Reception: FM, MW
  • Frequencies:
    • FM: 87.4 - 108 MHz
    • MW: 515 - 1.611 kHz
  • Frequency response: 20 - 15,000 Hz
  • Input sensitivity:
    • FM Mono: 23 dBf / 7.7 müV

VHF Stereo: 43 dBf / 77.4 müV MW: 53 dB mü/m Distortion factor FM: less than 0.2 Distortion factor MW: less than 0.3 Signal-to-noise ratio: 74 dB (mono), 69 dB (stereo)

  • Signal-to-noise ratio:
  • Channel separation: better 43 dB (1kHz)
  • selectivity FM: 70 dB (+/-300kHz)
  • selectivity MW : 20 dB (+/-9kHz)
  • Co-wave selection: 2.0 dB
  • Spurious suppression: better 90 dB
  • IF attenuation: better 75 dB
  • IF attenuation: better 80 dB
  • AM rejection: better 60 dB
  • Output level:
  • RDS: no
  • Station memory: 10


Special Features

  • Remote control


Remarks




Pictures

Reports

  • Rainer Kruse at hifi-classic-reparatur.de (April 2, 2014), see also link below:
  • "The Stasis circuit developed by Threshold, guarantor for load stable power supply in the low impedance power range, worked in the well-known power amplifiers, and in the flat receivers!".

The SR-2,3 and 4 receivers, the SR-4 even remote controllable, had a good sounding phono section (the 2 unfortunately only MM) and of course an excellent tuner built in. Sound-wise, these parts tend to have a natural low and wide, rather than high, stage.

  • An SR-4 sounds much more natural than, say, an Accuphase E-206, which plays louder and bigger, but much less musical.

Details are beautifully resolved with an emphasis on subtleties and textures, analytical in the best sense.

  • At the same time the parts still look smart and are well adjustable, just no debris.
  • If you get your hands on a semi-maintained unit today, after more than 20 years, they run flawlessly. A manufacturing quality that the Europeans and Yanks were running after!"


  • Report in "FonoForum" 7 / 1988


Links