Rotel RX-400 A
Data
General
- Manufacturer: Rotel
- Model: RX-400 A
- Type: Receiver
- Years of manufacture: 1973 - 1976
- Made in: Japan
- Color: Silver, wooden cabinet
- Remote control: no
- Power consumption:
- Dimensions (WxHxD): 425 x 135 x 330 mm.
- Weight: 7.1 kg
- Original price approx.: 845 DM
Connections
- Number of inputs:
- Phono MM: 2 mV, 50 kOhm.
Aux: 150 mV, 50 kOhm, max. 15 V Tape Play: 150 mV, 50 kOhm, max. 15 V Main In: 1.5 V, 50 kOhm
- Antenna VHF (75/300 Ohm), MW (300 Ohm)
- Number of outputs:
- Tape Rec: 350 mV, 3.3 kOhm
- Tape Rec DIN: 120 mV, 90 kOhm
- Pre Out:
- Headphones:
- 2 pairs of speakers
Technical Specifications
Amplifier
- Continuous power (at distortion)
- 8 Ohm: 2x 15 Watt (20 Hz - 20'000 Hz)
- 4 Ohm: 2x 20 Watt (1 kHz)
- Dynamic power
- 8 Ohm: 2x 20 Watt
- 4 Ohm: 2x 30 Watt
- Frequency response: 15 Hz - 50 kHz
- Distortion factor: < 0.6
- Attenuation factor: 30 at 8 Ohm
- Signal-to-noise ratio:
- Phono MM: 70 dB
High level: 90 dB
- Tone control
Bass: ± 10 dB at 100 Hz Treble: ± 10 dB at 10 kHz
- Loudness: + 10 dB at 100 Hz / + 3 dB at 10 kHz
- High Filter:
- Low Filter (Subsonic):
- Muting:
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87 - 108 MHz
MW: 525 - 1'605 kHz
- Frequency response: 30 - 15'000 Hz, ± 0,5 dB
- Input sensitivity: 2.2 µV (IHF)
- Distortion factor: < 1 %
- Signalrauschabstand:
- Mono: 60 dB
- Stereo: 55 dB
- Kanaltrennung: 35 dB
- Trennschärfe: 40 dB
- Gleichwellenselektion: 1,5 dB
- Nebenwellenselektion: >90 dB
- Image frequency attenuation: > 100 dB
- IF attenuation: > 100 dB (at 98 MHz)
- AM suppression: 60 dB
Special Features
- Monitor button
Remarks
- Other receivers in the same series:
- Amplifiers of the same series:
- Tuners of the same series:
- Headphones of the same series:
Pictures
- Extract from brochure: Rotel RX-400 A
- Picture: Rotel RX-400 A
Reports
Links
</1>