Rotel RA-1210
Data[edit]
General
- Manufacturer: Rotel
- Model: RA-1210
- Type: Integrated amplifier
- Years of manufacture: 1973 - 1976
- Made in: Japan
- Color: silver, wooden cabinet
- Remote control: no
- Power consumption:
- Dimensions (WxHxD): 420 x 140 x 304 mm.
- Weight: 13.7 kg
- Original price approx.: 978 DM
Connections
- Number of inputs:
- Phono MM 1: 1 mV, 100 kOhm.
- Phono MM 2: switchable 1 mV, 2 mV, 4 mV, switchable 10 kOhm, 50 kOhm. 100 kOhm
- Aux 1, 2: 180 mV, 50 kOhm, max. 15 V
- Tape Play 1, 2: 180 mV, 50 kOhm, max. 15 V
- Main In: 1.5 V, 50 kOhm
- Number of outputs:
- Tape Rec 1, 2: 350 mV, 3.3 kOhm.
- Tape Rec DIN: 120 mV, 90 kOhm
- Pre Out:
- Headphones:
- 2 pairs of speakers
Technical Data
- Continuous power (at distortion factor)
- 8 Ohm: 2x 60 Watt (20 Hz - 20'000 Hz)
- 4 Ohm: 2x 80 Watt (1 kHz)
- Dynamic power
- 8 Ohm: 2x 80 Watt
- 4 Ohm: 2x 110 Watt
- Frequency response: 3 Hz - 50 kHz, - 3 dB
- Distortion factor: < 0.1 %
- Attenuation factor: 35 at 8 Ohm
- Signal-to-noise ratio:
- Phono MM: 70 dB
- High level: 80 dB
- Tone control
- Bass: ± 10 dB at 100 Hz
- Operating frequencies: 200 Hz, 400 Hz
- Bass: ± 10 dB at 100 Hz
Treble: ± 10 dB at 10 kHz
- Operating frequencies: 2 kHz, 4 kHz
- Loudness: + 10 dB at 100 Hz / + 3 dB at 10 kHz
- High Filter: - 12 dB / octave at 8 kHz
- Low Filter (Subsonic): - 12 dB / octave at 30 Hz
- Muting: 0 dB, - 20 dB
Special Features
- Tape Dubbing
Remarks[edit]
- Other receivers in the same series:
- Amplifiers of the same series:
- Tuners of the same series:
- Headphones of the same series:
Pictures[edit]
- Extract from brochure: Rotel RA-1210
Reports[edit]
- Report at "Good Old Hifi": [[1]]