Difference between revisions of "Technics SC-VC1060"
| Line 1: | Line 1: | ||
| − | + | This system is the "smaller brother" of the SC-VC1180: | |
http://www.hifi-wiki.de/images/2/27/Technics_SC-VC1060.JPG | http://www.hifi-wiki.de/images/2/27/Technics_SC-VC1060.JPG | ||
| − | + | The Technics RS-CA1060 cassette deck is identical. | |
| − | + Full-Logic | + | + Full-Logic control |
| − | + | + | + two-head system |
+ 2 x Autoreverse | + 2 x Autoreverse | ||
+ Dolby B/C NR | + Dolby B/C NR | ||
| − | + CCRT - Computer Controlled Record Tuning ( | + | + CCRT - Computer Controlled Record Tuning (automatic tape measuring system) |
| − | + | + | + motor-driven, remote-controlled cassette trays |
+ THDP Technics Hybryd Dygastic Panel | + THDP Technics Hybryd Dygastic Panel | ||
| − | + | + | + automatic music search |
| − | + | + | + automatic recording level control |
| − | + | + | + automatic tape type selection - the drive is also suitable for metal cassettes ! |
| − | - | + | - unfortunately Dolby HX-Pro is missing |
| − | - | + | - a tape counter is also missing - standard with the competition ! |
| − | + | The Technics SL-CA1060 CD player, on the other hand, is a simple version that can only play audio CDs, but it does have a digital output. | |
| − | + 32 | + | + 32 track memory for 3 different CDs |
| − | + MASH D/A | + | + MASH D/A converter |
| − | + | + | + automatic track selection for tape copy |
| − | + | + | + optical digital output |
| − | + CD-R | + | + CD-R playable |
| − | - | + | - unfortunately no CD-Text |
| − | + | The Technics ST-CA1060 preamplifier only has an input/output called DCC and a phono connection; Dolby Surround ProLogic is also missing here. | |
| − | + LW, MW, | + | + LW, MW, FM; 39 station presets; cable/antenna connection |
| − | + Timer | + | + Timer for recording and playback |
| − | + | + | + Connections: DCC input/output, phono input. |
+ VBO Virtual Battery Operation | + VBO Virtual Battery Operation | ||
| − | + | + | + Two cast aluminium, heavy knobs with good resistance for station search and volume control |
| − | + | and volume control | |
| − | - | + | - unfortunately no electronic EQ and no spectrum analyser |
| − | - | + | - unfortunately no RDS, but very good reception and sound ! |
| − | - | + | - unfortunately no digital inputs/outputs |
| − | - | + | - a multi-channel input for connecting external surround decoders is missing |
| − | + | The amplifier Technics SE-CA1060 has only 2 x 40W sine wave at 6 Ohm. | |
| − | + 2 x 40W | + | + 2 x 40W sine wave power into 6 ohms, or 2 x 50 watts into 4 ohms, or 2 x 30 watts into 8 ohms |
| − | + MOS-FET | + | + MOS-FET technology (New Class A) |
| − | + Bass | + | + Bass, sub-bass and treble controls for sound tuning |
| − | + 6 | + | + 6.25mm headphone jack, gold-plated |
| − | + | + | + two large, illuminated analog VA meters as eye-catcher |
| − | + | SB-CA1060 speaker in 3-way technology, with tweeter dome and midrange driver radiating to the front, while the woofer sits in the chassis and radiates to the rear via a passive cone | |
| − | + | + | + frequency response 31Hz - 22kHz |
| − | + 2cm | + | + 2cm dome tweeter |
| − | + 8cm | + | + 8cm midrange driver |
| − | + | + | + passive bass cone (18cm) with bass driver (14cm), rear radiating |
| − | [[ | + | [[Category:Complete systems]] |
Latest revision as of 16:52, 9 February 2010
This system is the "smaller brother" of the SC-VC1180:
The Technics RS-CA1060 cassette deck is identical.
+ Full-Logic control + two-head system + 2 x Autoreverse + Dolby B/C NR + CCRT - Computer Controlled Record Tuning (automatic tape measuring system) + motor-driven, remote-controlled cassette trays + THDP Technics Hybryd Dygastic Panel + automatic music search + automatic recording level control + automatic tape type selection - the drive is also suitable for metal cassettes !
- unfortunately Dolby HX-Pro is missing - a tape counter is also missing - standard with the competition !
The Technics SL-CA1060 CD player, on the other hand, is a simple version that can only play audio CDs, but it does have a digital output.
+ 32 track memory for 3 different CDs + MASH D/A converter + automatic track selection for tape copy + optical digital output + CD-R playable
- unfortunately no CD-Text
The Technics ST-CA1060 preamplifier only has an input/output called DCC and a phono connection; Dolby Surround ProLogic is also missing here.
+ LW, MW, FM; 39 station presets; cable/antenna connection
+ Timer for recording and playback
+ Connections: DCC input/output, phono input.
+ VBO Virtual Battery Operation
+ Two cast aluminium, heavy knobs with good resistance for station search and volume control
and volume control
- unfortunately no electronic EQ and no spectrum analyser
- unfortunately no RDS, but very good reception and sound !
- unfortunately no digital inputs/outputs
- a multi-channel input for connecting external surround decoders is missing
The amplifier Technics SE-CA1060 has only 2 x 40W sine wave at 6 Ohm.
+ 2 x 40W sine wave power into 6 ohms, or 2 x 50 watts into 4 ohms, or 2 x 30 watts into 8 ohms + MOS-FET technology (New Class A) + Bass, sub-bass and treble controls for sound tuning + 6.25mm headphone jack, gold-plated + two large, illuminated analog VA meters as eye-catcher
SB-CA1060 speaker in 3-way technology, with tweeter dome and midrange driver radiating to the front, while the woofer sits in the chassis and radiates to the rear via a passive cone
+ frequency response 31Hz - 22kHz + 2cm dome tweeter + 8cm midrange driver + passive bass cone (18cm) with bass driver (14cm), rear radiating