Difference between revisions of "SABA 9141 Tc"
(→Bilder) |
|||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[SABA]] GmbH, VS-Villingen |
| − | * | + | * Model: Saba Ultra Hifi professional Receiver 9141 telecommander |
| − | * | + | * Years of manufacture: |
| − | * | + | * Made in: Germany |
| − | * | + | * Color: anthracite/sibermetallic or anthracite/matt black |
| − | * | + | * Remote control: Remote control TC 91 (infrared) |
| − | * | + | * Mains connection: 220 V, 50 Hz |
| − | * | + | * Power consumption: 350 Watt |
| − | * | + | * Dimensions: 618 x 135 x 342 mm (W x H x D) |
| − | * | + | * Weight: 13,5 kg |
| − | * | + | * New price approx: |
| − | ''' | + | '''Connections''' |
| − | * | + | * Number of inputs: 5 |
** Monitor, Tape 1, Tape 2, Phono magn. | ** Monitor, Tape 1, Tape 2, Phono magn. | ||
| − | * | + | * Number of outputs: |
** Tape 1/2 | ** Tape 1/2 | ||
| − | ''' | + | '''Specifications''' |
| − | '' | + | ''Receiving Section (Tuner)'' |
| − | * | + | * Antenna inputs: |
| − | ** FM ( | + | ** FM (VHF) DIN 45325 coax socket / 75 Ohm or DIN 45316 / 300 Ohm. |
** AM (MW) DIN 45315 | ** AM (MW) DIN 45315 | ||
| − | * | + | * Wavebands (frequencies): |
| − | ** | + | ** VHF: 87.5 - 108 MHz |
| − | + | MW: 520 - 1630 kHz | |
| − | * | + | * Intermediate frequencies: |
| − | ** FM ( | + | ** FM (VHF): 10.7 MHz |
| − | + | AM (MW): 461 kHz | |
| − | * | + | * Sensitivities: |
| − | ** | + | ** VHF |
| − | *** Mono: 0 | + | *** Mono: 0.6 µV for 26 dB signal-to-noise ratio (40 kHz deviation) |
| − | *** Stereo: 20 µV | + | *** Stereo: 20 µV for 46 dB signal-to-noise ratio (40 kHz deviation + pilot) |
| − | *** | + | *** Stereo threshold 5 µV |
** MW: | ** MW: | ||
| − | *** 4 µV | + | *** 4 µV for 10 dB signal-to-noise ratio |
| − | *** 30 µV | + | *** 30 µV for 26 dB signal-to-noise ratio (at 600 kHz, modulation 30 % / 400 Hz). |
| − | * | + | * Bandwidth: |
| − | ** FM | + | ** FM IF: 140 kHz |
| − | ** AM | + | ** AM IF: 4 kHz |
| − | * | + | * selectivity: |
| − | ** FM | + | ** FM IF 80 dB |
| − | ** AM | + | ** AM IF 52 dB |
| − | * | + | * Mirror selection: |
| − | ** FM | + | ** FM 60 dB |
| − | ** AM | + | ** AM 46 dB |
| − | * | + | * Limiting input (muting threshold): 0.4 µV at - 3 dB |
| − | * AM | + | * AM suppression: 60 dB at 1 mV input voltage |
| − | * | + | * Large signal response: 85 dB |
| − | * | + | * Common mode selection: 1.0 dB at 1 mV input voltage |
| − | * | + | * Distortion factor: |
| − | ** FM-mono: 0 | + | ** FM-mono: 0.2 |
| − | ** FM-stereo: 0 | + | ** FM-stereo: 0.25% (1 mV, 1000 kHz, 40 kHz deviation) |
| − | * | + | * External voltage spacing: |
** FM-mono: 71 dB | ** FM-mono: 71 dB | ||
** FM-stereo: 67 dB | ** FM-stereo: 67 dB | ||
| − | * | + | * Noise-to-noise ratio: |
** FM-mono: 71 dB | ** FM-mono: 71 dB | ||
| − | + | FM stereo: 67 dB | |
| − | * | + | * Frequency response: 20...14.500 Hz ± 3 dB |
| − | * | + | * Pilot suppression: 60 dB |
| − | * | + | * Subcarrier suppression: 60 dB |
| − | * | + | * Crosstalk attenuation: |
| − | ** 40 dB (1 | + | ** 40 dB (1,000 Hz) |
| − | + | 35 dB (250 - 6,300 Hz) | |
| − | * | + | * Station memory: 7 x FM |
* RDS: -- | * RDS: -- | ||
| − | * FTZ | + | * FTZ test number: U 104 |
| − | '' | + | ''Amplifier section'' |
| − | * | + | * Output power: |
| − | ** 2 x 48 W | + | ** 2 x 48 W rated power (sine power) into 4 ohms. |
| − | ** 2 x 36 W | + | ** 2 x 36 W rated power (sine power) into 8 Ohm |
| − | + | 2 x 70 W music power into 4 Ohm | |
| − | ** 2 x 50 W | + | ** 2 x 50 W music power into 8 Ohm |
| − | + | Distortion factor: 0.05% at rated power | |
| − | * Intermodulation: 0 | + | * Intermodulation: 0.25% (250 / 8,000 Hz, 4:1) at rated power |
| − | * | + | * Frequency response: 25 - 40,000 Hz (± 1.5 dB) |
| − | * | + | * Power bandwidth: 10 - 80,000 Hz (- 3 dB) |
| − | * | + | * Input sensitivity for rated power (at 1,000 Hz; total gain) |
** Phono magn. / 47 kOhm = 3 mV | ** Phono magn. / 47 kOhm = 3 mV | ||
** Band 1, Band 2, Monitor / 470 kOhm = 200 mV | ** Band 1, Band 2, Monitor / 470 kOhm = 200 mV | ||
| − | * | + | * Overload resistance (at 1,000 Hz and 1 % distortion) |
| − | ** Phono magn. 80 mV / 28 | + | ** Phono magn. 80 mV / 28.5 dB |
| − | ** Band 1, Band 2, Monitor 5 | + | ** Band 1, Band 2, Monitor 5.5 V / 28.5 dB |
| − | * | + | * Equality of the channels: |
| − | ** ± 1 | + | ** ± 1.5 dB (volume 0 - 40 dB). |
| − | * | + | * Balance control range: |
| − | ** - 80 dB | + | ** - 80 dB per channel |
| − | * | + | * Tone control: |
| − | ** | + | ** Bass: ± 15 dB (60 Hz) |
| − | ** | + | ** Treble: ± 15 dB (15,000 Hz) |
| − | * | + | * Presence key: |
| − | ** + 6 | + | ** + 6.5 dB (3,150 Hz) |
| − | * | + | * Noise filter: - 3 dB at 8,000 Hz (slope 12 dB / octave) |
| − | * | + | * Rumble filter: - 3 dB at 60 Hz (slope 12 dB / octave) |
| − | * | + | * Phono equalization according to RIAA 3180 / 318 / 75 µs, compliance ± 0.5 dB |
| − | * | + | * Tape input external voltage spacing |
| − | + | 75 dB at nominal power | |
| − | + | 50 dB at 2 x 50 mW (input terminated with 47 k // 220 pF) | |
| − | * | + | * Crosstalk attenuation tape input |
| − | + | 56 dB (1,000 Hz) | |
| − | ** 50 dB (250 - 10 | + | ** 50 dB (250 - 10,000 Hz) (input terminated with 47 k // 220 pF) |
| − | * | + | * Phono magn. input |
| − | + | 62 dB (1,000 Hz) | |
| − | ** 46 dB (250 - 10 | + | ** 46 dB (250 - 10,000 Hz) (input terminated with 2.2 kOhm). |
| − | * | + | * Attenuation factor: |
| − | ** 30 | + | ** 30 for 4 ohms |
| − | ** 60 | + | ** 60 for 8 Ohm |
| − | * | + | * Outputs: |
| − | ** 2 | + | ** 2 stereo speakers 4 - 16 ohms (switchable). |
| − | ** 2 | + | ** 2 stereo additional speakers 4 - 16 Ohm (switchable) |
| − | ** 2 | + | ** 2 stereo headphones 100 - 2,000 Ohm, DIN 45 327 |
| − | ** 2 | + | ** 2 tape outputs (tape 1, tape 2) level 0.7 mV / kOhm (15 kHz deviation) |
| − | ** 1 | + | ** 1 monitor output level 10 mV / kOhm (15 kHz swing) |
| − | * | + | * Remote control (IR): |
| − | ** | + | ** On / Off (stand by), sound stop (mute). |
| − | + | Volume, bass, treble, balance | |
** Phono, Band 1, Band 2, AM, FM, FM 1 - 7 | ** Phono, Band 1, Band 2, AM, FM, FM 1 - 7 | ||
| − | + | Definitions according to DIN 45.500, as far as the Dten concern the FM receiver section and the amplifier. | |
| − | ( | + | (Taken from the original BDA, logically supplemented) |
| − | ''' | + | '''Special Features''' |
| − | * | + | * Connection for external, programmable antenna rotor |
| − | * Front | + | * Front main power switch, stand-by, |
| − | * | + | * Speaker selector switch 0 - 1 - 2 - 1+2 |
| − | * | + | * noise filter, rumble filter, presence button |
| − | * | + | * analogue frequency display of FM / AM transmitter |
| − | * | + | * analog tuning/field strength meter, center meter (FM center), FM pilot, AFC |
| − | * LED | + | * LED indicators for volume, bass, treble, balance |
| − | * DIN | + | * DIN connector (5-pin stereo) for phono (rear), band 1 (rear), monitor (rear), band 2 (front) |
| − | * DIN | + | * DIN speaker plugs 2 x 2 rear |
| − | * Stereo | + | * Stereo jack headphones 2 x front |
| − | == | + | == Notes == |
| − | + | Other models in the same series: | |
| − | == | + | == Pictures == |
| − | [[ | + | [[File:Saba 9141.jpg]] |
| − | == | + | == Reports == |
== Links == | == Links == | ||
| − | [[ | + | [[Category:Receiver]] |
Latest revision as of 16:37, 22 October 2014
Data[edit]
General
- Manufacturer: SABA GmbH, VS-Villingen
- Model: Saba Ultra Hifi professional Receiver 9141 telecommander
- Years of manufacture:
- Made in: Germany
- Color: anthracite/sibermetallic or anthracite/matt black
- Remote control: Remote control TC 91 (infrared)
- Mains connection: 220 V, 50 Hz
- Power consumption: 350 Watt
- Dimensions: 618 x 135 x 342 mm (W x H x D)
- Weight: 13,5 kg
- New price approx:
Connections
- Number of inputs: 5
- Monitor, Tape 1, Tape 2, Phono magn.
- Number of outputs:
- Tape 1/2
Specifications
Receiving Section (Tuner)
- Antenna inputs:
- FM (VHF) DIN 45325 coax socket / 75 Ohm or DIN 45316 / 300 Ohm.
- AM (MW) DIN 45315
- Wavebands (frequencies):
- VHF: 87.5 - 108 MHz
MW: 520 - 1630 kHz
- Intermediate frequencies:
- FM (VHF): 10.7 MHz
AM (MW): 461 kHz
- Sensitivities:
- VHF
- Mono: 0.6 µV for 26 dB signal-to-noise ratio (40 kHz deviation)
- Stereo: 20 µV for 46 dB signal-to-noise ratio (40 kHz deviation + pilot)
- Stereo threshold 5 µV
- MW:
- 4 µV for 10 dB signal-to-noise ratio
- 30 µV for 26 dB signal-to-noise ratio (at 600 kHz, modulation 30 % / 400 Hz).
- VHF
- Bandwidth:
- FM IF: 140 kHz
- AM IF: 4 kHz
- selectivity:
- FM IF 80 dB
- AM IF 52 dB
- Mirror selection:
- FM 60 dB
- AM 46 dB
- Limiting input (muting threshold): 0.4 µV at - 3 dB
- AM suppression: 60 dB at 1 mV input voltage
- Large signal response: 85 dB
- Common mode selection: 1.0 dB at 1 mV input voltage
- Distortion factor:
- FM-mono: 0.2
- FM-stereo: 0.25% (1 mV, 1000 kHz, 40 kHz deviation)
- External voltage spacing:
- FM-mono: 71 dB
- FM-stereo: 67 dB
- Noise-to-noise ratio:
- FM-mono: 71 dB
FM stereo: 67 dB
- Frequency response: 20...14.500 Hz ± 3 dB
- Pilot suppression: 60 dB
- Subcarrier suppression: 60 dB
- Crosstalk attenuation:
- 40 dB (1,000 Hz)
35 dB (250 - 6,300 Hz)
- Station memory: 7 x FM
- RDS: --
- FTZ test number: U 104
Amplifier section
- Output power:
- 2 x 48 W rated power (sine power) into 4 ohms.
- 2 x 36 W rated power (sine power) into 8 Ohm
2 x 70 W music power into 4 Ohm
- 2 x 50 W music power into 8 Ohm
Distortion factor: 0.05% at rated power
- Intermodulation: 0.25% (250 / 8,000 Hz, 4:1) at rated power
- Frequency response: 25 - 40,000 Hz (± 1.5 dB)
- Power bandwidth: 10 - 80,000 Hz (- 3 dB)
- Input sensitivity for rated power (at 1,000 Hz; total gain)
- Phono magn. / 47 kOhm = 3 mV
- Band 1, Band 2, Monitor / 470 kOhm = 200 mV
- Overload resistance (at 1,000 Hz and 1 % distortion)
- Phono magn. 80 mV / 28.5 dB
- Band 1, Band 2, Monitor 5.5 V / 28.5 dB
- Equality of the channels:
- ± 1.5 dB (volume 0 - 40 dB).
- Balance control range:
- - 80 dB per channel
- Tone control:
- Bass: ± 15 dB (60 Hz)
- Treble: ± 15 dB (15,000 Hz)
- Presence key:
- + 6.5 dB (3,150 Hz)
- Noise filter: - 3 dB at 8,000 Hz (slope 12 dB / octave)
- Rumble filter: - 3 dB at 60 Hz (slope 12 dB / octave)
- Phono equalization according to RIAA 3180 / 318 / 75 µs, compliance ± 0.5 dB
- Tape input external voltage spacing
75 dB at nominal power 50 dB at 2 x 50 mW (input terminated with 47 k // 220 pF)
- Crosstalk attenuation tape input
56 dB (1,000 Hz)
- 50 dB (250 - 10,000 Hz) (input terminated with 47 k // 220 pF)
- Phono magn. input
62 dB (1,000 Hz)
- 46 dB (250 - 10,000 Hz) (input terminated with 2.2 kOhm).
- Attenuation factor:
- 30 for 4 ohms
- 60 for 8 Ohm
- Outputs:
- 2 stereo speakers 4 - 16 ohms (switchable).
- 2 stereo additional speakers 4 - 16 Ohm (switchable)
- 2 stereo headphones 100 - 2,000 Ohm, DIN 45 327
- 2 tape outputs (tape 1, tape 2) level 0.7 mV / kOhm (15 kHz deviation)
- 1 monitor output level 10 mV / kOhm (15 kHz swing)
- Remote control (IR):
- On / Off (stand by), sound stop (mute).
Volume, bass, treble, balance
- Phono, Band 1, Band 2, AM, FM, FM 1 - 7
Definitions according to DIN 45.500, as far as the Dten concern the FM receiver section and the amplifier.
(Taken from the original BDA, logically supplemented)
Special Features
- Connection for external, programmable antenna rotor
- Front main power switch, stand-by,
- Speaker selector switch 0 - 1 - 2 - 1+2
- noise filter, rumble filter, presence button
- analogue frequency display of FM / AM transmitter
- analog tuning/field strength meter, center meter (FM center), FM pilot, AFC
- LED indicators for volume, bass, treble, balance
- DIN connector (5-pin stereo) for phono (rear), band 1 (rear), monitor (rear), band 2 (front)
- DIN speaker plugs 2 x 2 rear
- Stereo jack headphones 2 x front
Notes[edit]
Other models in the same series:
Pictures[edit]
