SABA 9141 Tc

Data

General

• Manufacturer: SABA GmbH, VS-Villingen
• Model: Saba Ultra Hifi professional Receiver 9141 telecommander
• Years of manufacture:
• Made in: Germany
• Color: anthracite/sibermetallic or anthracite/matt black
• Remote control: Remote control TC 91 (infrared)
• Mains connection: 220 V, 50 Hz
• Power consumption: 350 Watt
• Dimensions: 618 x 135 x 342 mm (W x H x D)
• Weight: 13,5 kg
• New price approx:

Connections

• Number of inputs: 5
  • Monitor, Tape 1, Tape 2, Phono magn.
• Number of outputs:
  • Tape 1/2

Specifications

Receiving Section (Tuner)

• Antenna inputs:
  • FM (VHF) DIN 45325 coax socket / 75 Ohm or DIN 45316 / 300 Ohm.
  • AM (MW) DIN 45315
• Wavebands (frequencies):
  • VHF: 87.5 - 108 MHz

MW: 520 - 1630 kHz

• Intermediate frequencies:
  • FM (VHF): 10.7 MHz

AM (MW): 461 kHz

• Sensitivities:
  • VHF
    • Mono: 0.6 µV for 26 dB signal-to-noise ratio (40 kHz deviation)
    • Stereo: 20 µV for 46 dB signal-to-noise ratio (40 kHz deviation + pilot)
    • Stereo threshold 5 µV
  • MW:
    • 4 µV for 10 dB signal-to-noise ratio
    • 30 µV for 26 dB signal-to-noise ratio (at 600 kHz, modulation 30 % / 400 Hz).
• Bandwidth:
  • FM IF: 140 kHz
  • AM IF: 4 kHz
• selectivity:
  • FM IF 80 dB
  • AM IF 52 dB
• Mirror selection:
  • FM 60 dB
  • AM 46 dB
• Limiting input (muting threshold): 0.4 µV at - 3 dB
• AM suppression: 60 dB at 1 mV input voltage
• Large signal response: 85 dB
• Common mode selection: 1.0 dB at 1 mV input voltage
• Distortion factor:
  • FM-mono: 0.2
  • FM-stereo: 0.25% (1 mV, 1000 kHz, 40 kHz deviation)
• External voltage spacing:
  • FM-mono: 71 dB
  • FM-stereo: 67 dB
• Noise-to-noise ratio:
  • FM-mono: 71 dB

FM stereo: 67 dB

• Frequency response: 20...14.500 Hz ± 3 dB
• Pilot suppression: 60 dB
• Subcarrier suppression: 60 dB
• Crosstalk attenuation:
  • 40 dB (1,000 Hz)

35 dB (250 - 6,300 Hz)

• Station memory: 7 x FM
• RDS: --
• FTZ test number: U 104

Amplifier section

• Output power:
  • 2 x 48 W rated power (sine power) into 4 ohms.
  • 2 x 36 W rated power (sine power) into 8 Ohm

2 x 70 W music power into 4 Ohm

• • 2 x 50 W music power into 8 Ohm

Distortion factor: 0.05% at rated power

• Intermodulation: 0.25% (250 / 8,000 Hz, 4:1) at rated power
• Frequency response: 25 - 40,000 Hz (± 1.5 dB)
• Power bandwidth: 10 - 80,000 Hz (- 3 dB)
• Input sensitivity for rated power (at 1,000 Hz; total gain)
  • Phono magn. / 47 kOhm = 3 mV
  • Band 1, Band 2, Monitor / 470 kOhm = 200 mV
• Overload resistance (at 1,000 Hz and 1 % distortion)
  • Phono magn. 80 mV / 28.5 dB
  • Band 1, Band 2, Monitor 5.5 V / 28.5 dB
• Equality of the channels:
  • ± 1.5 dB (volume 0 - 40 dB).
• Balance control range:
  • - 80 dB per channel
• Tone control:
  • Bass: ± 15 dB (60 Hz)
  • Treble: ± 15 dB (15,000 Hz)
• Presence key:
  • + 6.5 dB (3,150 Hz)
• Noise filter: - 3 dB at 8,000 Hz (slope 12 dB / octave)
• Rumble filter: - 3 dB at 60 Hz (slope 12 dB / octave)
• Phono equalization according to RIAA 3180 / 318 / 75 µs, compliance ± 0.5 dB
• Tape input external voltage spacing

75 dB at nominal power 50 dB at 2 x 50 mW (input terminated with 47 k // 220 pF)

• Crosstalk attenuation tape input

56 dB (1,000 Hz)

• • 50 dB (250 - 10,000 Hz) (input terminated with 47 k // 220 pF)
• Phono magn. input

62 dB (1,000 Hz)

• • 46 dB (250 - 10,000 Hz) (input terminated with 2.2 kOhm).
• Attenuation factor:
  • 30 for 4 ohms
  • 60 for 8 Ohm
• Outputs:
  • 2 stereo speakers 4 - 16 ohms (switchable).
  • 2 stereo additional speakers 4 - 16 Ohm (switchable)
  • 2 stereo headphones 100 - 2,000 Ohm, DIN 45 327
  • 2 tape outputs (tape 1, tape 2) level 0.7 mV / kOhm (15 kHz deviation)
  • 1 monitor output level 10 mV / kOhm (15 kHz swing)

• Remote control (IR):
  • On / Off (stand by), sound stop (mute).

Volume, bass, treble, balance

• • Phono, Band 1, Band 2, AM, FM, FM 1 - 7

Definitions according to DIN 45.500, as far as the Dten concern the FM receiver section and the amplifier.

(Taken from the original BDA, logically supplemented)

Special Features

• Connection for external, programmable antenna rotor
• Front main power switch, stand-by,
• Speaker selector switch 0 - 1 - 2 - 1+2
• noise filter, rumble filter, presence button
• analogue frequency display of FM / AM transmitter
• analog tuning/field strength meter, center meter (FM center), FM pilot, AFC
• LED indicators for volume, bass, treble, balance
• DIN connector (5-pin stereo) for phono (rear), band 1 (rear), monitor (rear), band 2 (front)
• DIN speaker plugs 2 x 2 rear
• Stereo jack headphones 2 x front

Notes

Other models in the same series:

Pictures