Difference between revisions of "Audio Technica AT 33 PTG/II"
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Audio Technica]] |
| − | * | + | * Model: AT 33 PTG/II |
| − | * | + | * Years of manufacture: |
| − | * | + | * Made in: Japan |
| − | * | + | * Color: black |
| − | * | + | * Weight: 6,9 g |
| − | * | + | * Original price: approx. 550, - € |
| − | ''' | + | '''Technical Data''' |
| − | * | + | * Principle: Moving Coil (MC) |
| − | * | + | * Frequency response: 15 - 50,000 Hz |
| − | * | + | * Channel separation: 30 dB at 1 kHz |
| − | * | + | * Channel balance: 0.5 dB at 1 kHz |
| − | * | + | * Crosstalk attenuation: |
| − | * | + | * Output voltage: > 0.3 mV (1 kHz at 3.54 cm/s). |
| − | * | + | * Terminating resistor: > 100 Ohm |
| − | * | + | * Internal resistance (DC): 10 Ohm |
| − | * | + | * Sampling capability at 315 Hz: |
| − | * | + | * Needle type: MicroLine (r/R: 2.5/75 µm), bare on boron needle carrier. |
| − | * | + | * Recommended tracking force: 20 mN |
| − | * | + | * Needle compliance: 10 µm/mN ( at 100 Hz ) |
| − | ''' | + | '''Special features''' |
| − | * | + | * Neodymium magnets |
| − | * Dual | + | * Dual moving coil system for high channel separation |
| − | * "Hanenite" | + | * "Hanenite" anti-vibration rubber |
| − | + | Other models in the same series: | |
* [[Audio Technica AT 33 EV]] | * [[Audio Technica AT 33 EV]] | ||
* [[Audio Technica AT 33 PTG/II]] | * [[Audio Technica AT 33 PTG/II]] | ||
| Line 40: | Line 40: | ||
| − | == | + | == Remarks == |
| − | * | + | * Included are two sets of mounting screws (M2x13 and M2x19) with screwdriver, headshell cable, cleaning brush and needle guard. |
| − | == | + | == Reports == |
| − | == | + | == Pictures == |
== Links == | == Links == | ||
| − | * [http://eu.audio-technica.com/de/products/cartridges/subcategory.asp?catID=8&subID=57 Audio Technica Moving Coil | + | * [http://eu.audio-technica.com/de/products/cartridges/subcategory.asp?catID=8&subID=57 Audio Technica Moving Coil Pickups] |
| − | [[ | + | [[Category:Pickups]] |
Latest revision as of 14:35, 28 January 2016
Data[edit]
General
- Manufacturer: Audio Technica
- Model: AT 33 PTG/II
- Years of manufacture:
- Made in: Japan
- Color: black
- Weight: 6,9 g
- Original price: approx. 550, - €
Technical Data
- Principle: Moving Coil (MC)
- Frequency response: 15 - 50,000 Hz
- Channel separation: 30 dB at 1 kHz
- Channel balance: 0.5 dB at 1 kHz
- Crosstalk attenuation:
- Output voltage: > 0.3 mV (1 kHz at 3.54 cm/s).
- Terminating resistor: > 100 Ohm
- Internal resistance (DC): 10 Ohm
- Sampling capability at 315 Hz:
- Needle type: MicroLine (r/R: 2.5/75 µm), bare on boron needle carrier.
- Recommended tracking force: 20 mN
- Needle compliance: 10 µm/mN ( at 100 Hz )
Special features
- Neodymium magnets
- Dual moving coil system for high channel separation
- "Hanenite" anti-vibration rubber
Other models in the same series:
- Audio Technica AT 33 EV
- Audio Technica AT 33 PTG/II
- Audio Technica AT 33 R
- Audio Technica AT 33 SA
- Audio Technica AT 33 Mono
Remarks[edit]
- Included are two sets of mounting screws (M2x13 and M2x19) with screwdriver, headshell cable, cleaning brush and needle guard.