Audio Technica AT 33 SA

Data[edit]

General

  • Manufacturer: Audio Technica
  • Model: AT 33 Sa
  • Years of manufacture:
  • Made in: Japan
  • Color: white, gray
  • Weight: 6,9 g
  • Original price: approx. 800,- €


Technical Data

  • Principle: Moving Coil (MC)
  • Frequency response: 15 - 50,000 Hz
  • Channel separation: 30 dB at 1 kHz
  • Channel balance: 0.5 dB at 1 kHz
  • Crosstalk attenuation:
  • Output voltage: > 0.3 mV (1 kHz at 3.54 cm/s).
  • Terminating resistor: > 100 Ohm
  • Internal resistance (DC): 10 Ohm
  • Sampling capability at 315 Hz:
  • Needle type: Shibata (r/R: 6/50 µm), bare on conical boron needle carrier.
  • Recommended tracking force: 20 mN
  • Needle compliance: 10 µm/mN ( at 100 Hz )


Special Features

  • Neodymium magnets
  • Dual moving coil system for high channel separation
  • "Hanenite" anti-vibration rubber

Other models in the same series:


Remarks[edit]

  • Included are two sets of mounting screws (M2x13 and M2x19) with screwdriver, headshell cable, cleaning brush and needle guard.

Reports[edit]

Pictures[edit]

Links[edit]

Retrieved from "https://hifi-wiki.com/index.php?title=Audio_Technica_AT_33_SA&oldid=99683"