Difference between revisions of "Acai AA-910"
Stefan Phan (talk | contribs) (Die Seite wurde neu angelegt: „*Produktart: Receiver *Marke: Akai ==Technische Daten:== *Model: Stereo Receiver AA-910 *Hersteller/Marke: Akai, Tokyo *Land: Japan *Jahr: 1973 *Typ:…“) |
|||
(3 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
− | * | + | __NOTOC__ |
− | * | + | == Data == |
+ | {{navigation}} | ||
+ | '''General''' | ||
+ | * Manufacturer: Akai | ||
+ | * Model: AA-910 | ||
+ | * Type: Receiver | ||
+ | * Years of manufacture: 1973 - 1975 | ||
+ | * Made in: Japan | ||
+ | * Color: silver, housing walnut | ||
+ | * Remote control: no | ||
+ | * Power consumption: | ||
+ | * Dimensions (WxHxD): 454 x 155 x 330 mm. | ||
+ | * Weight: 10.5 kg | ||
+ | * Original price approx.: 46'800 Yen (Japan, 1973), corresponds to about 700 DM | ||
+ | |||
+ | |||
+ | '''Connections''' | ||
+ | * Number of inputs: | ||
+ | ** phono: 2.5 mV, 50 kOhm, 130 mV max. | ||
+ | ** Microphone: 65 mV, 50 kOhm | ||
+ | ** Tape 1, 2: 150 mV, 100 kOhm | ||
+ | ** Aux: 150 mV, 100 kOhm | ||
+ | * Number of outputs: | ||
+ | ** Tape RCA: 150 mV | ||
+ | Tape DIN: 30 mV | ||
+ | ** 2 pairs of speakers | ||
+ | |||
+ | |||
+ | '''Technical Data''' | ||
+ | |||
+ | ''Amplifier'' | ||
+ | * Continuous power (at distortion) | ||
+ | ** 8 Ohm: 2x 13 W (RMS, 20 - 20'000 Hz), 2x 14 W (1 kHz) | ||
+ | ** 4 Ohm: 2x 18 W | ||
+ | * Dynamic power | ||
+ | ** 8 Ohm: 37 W | ||
+ | ** 4 Ohm: 50 W | ||
+ | * Total harmonic distortion: 0.5 | ||
+ | * Attenuation factor: | ||
+ | * Frequency response: 20 - 45'000Hz | ||
+ | * Signal to noise ratio: | ||
+ | ** Phono: > 60 dB | ||
+ | ** Microphone: > 65 dB | ||
+ | ** High level: > 80 dB | ||
+ | * Stereo channel separation: better than 50 dB (phono, 1kHz) | ||
+ | * Tone control: | ||
+ | ** Bass: ± 10 dB / 100Hz | ||
+ | treble: ± 10 dB / 10kHz | ||
+ | * Loudness: + 10 dB at 100 Hz, + 6 dB at 10 kHz | ||
+ | * High Filter: - 9 dB / 10kHz | ||
+ | * Low Filter (Subsonic): - 6 dB / 50Hz | ||
+ | * Mute: | ||
+ | |||
+ | |||
+ | ''Tuner'' | ||
+ | * Reception: FM, AM | ||
+ | * Frequencies: | ||
+ | ** FM: 88 - 108 Mhz | ||
+ | ** MW: 525 - 1605 kHz | ||
+ | * Frequency response: | ||
+ | * Input sensitivity: | ||
+ | ** FM: 1.8 µV | ||
+ | ** MW: 250 µV | ||
+ | * Distortion factor: | ||
+ | ** Stereo: 0.6 % | ||
+ | Mono: 0.2 | ||
+ | * Signal-to-noise ratio: 70 dB | ||
+ | * Channel separation: 40 dB, min. 35 dB | ||
+ | * selectivity: > 80 dB | ||
+ | * Co-wave selection: 2.5 dB | ||
+ | * Spurious wave selection: 70 dB | ||
+ | * Image frequency attenuation: > 80 dB | ||
+ | * IF attenuation: > 80 dB | ||
+ | * AM suppression: > 45 dB | ||
+ | |||
+ | |||
+ | '''Special Features''' | ||
+ | * Front input microphone | ||
+ | |||
+ | |||
+ | == Remarks == | ||
+ | * All models in the same series: | ||
+ | ** [[Akai AA-910]] | ||
+ | ** [[Akai AA-910 DB]] | ||
+ | ** [[Akai AA-920]] | ||
+ | ** [[Akai AA-930]] | ||
+ | ** [[Akai AA-940]] | ||
+ | ** [[Akai AS-960]] | ||
+ | ** [[Akai AS-970]] | ||
+ | ** [[Akai AS-980]] | ||
+ | |||
+ | |||
+ | == Pictures == | ||
+ | * Image: Akai AA-910 | ||
+ | [[File:AKAI AA-910.jpg]] | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | == | + | == Reviews == |
− | |||
− | |||
− | |||
− | |||
== Links == | == Links == | ||
− | [[ | + | |
− | + | [[Category:Receiver]] |
Latest revision as of 03:58, 28 August 2018
Data[edit]
General
- Manufacturer: Akai
- Model: AA-910
- Type: Receiver
- Years of manufacture: 1973 - 1975
- Made in: Japan
- Color: silver, housing walnut
- Remote control: no
- Power consumption:
- Dimensions (WxHxD): 454 x 155 x 330 mm.
- Weight: 10.5 kg
- Original price approx.: 46'800 Yen (Japan, 1973), corresponds to about 700 DM
Connections
- Number of inputs:
- phono: 2.5 mV, 50 kOhm, 130 mV max.
- Microphone: 65 mV, 50 kOhm
- Tape 1, 2: 150 mV, 100 kOhm
- Aux: 150 mV, 100 kOhm
- Number of outputs:
- Tape RCA: 150 mV
Tape DIN: 30 mV
- 2 pairs of speakers
Technical Data
Amplifier
- Continuous power (at distortion)
- 8 Ohm: 2x 13 W (RMS, 20 - 20'000 Hz), 2x 14 W (1 kHz)
- 4 Ohm: 2x 18 W
- Dynamic power
- 8 Ohm: 37 W
- 4 Ohm: 50 W
- Total harmonic distortion: 0.5
- Attenuation factor:
- Frequency response: 20 - 45'000Hz
- Signal to noise ratio:
- Phono: > 60 dB
- Microphone: > 65 dB
- High level: > 80 dB
- Stereo channel separation: better than 50 dB (phono, 1kHz)
- Tone control:
- Bass: ± 10 dB / 100Hz
treble: ± 10 dB / 10kHz
- Loudness: + 10 dB at 100 Hz, + 6 dB at 10 kHz
- High Filter: - 9 dB / 10kHz
- Low Filter (Subsonic): - 6 dB / 50Hz
- Mute:
Tuner
- Reception: FM, AM
- Frequencies:
- FM: 88 - 108 Mhz
- MW: 525 - 1605 kHz
- Frequency response:
- Input sensitivity:
- FM: 1.8 µV
- MW: 250 µV
- Distortion factor:
- Stereo: 0.6 %
Mono: 0.2
- Signal-to-noise ratio: 70 dB
- Channel separation: 40 dB, min. 35 dB
- selectivity: > 80 dB
- Co-wave selection: 2.5 dB
- Spurious wave selection: 70 dB
- Image frequency attenuation: > 80 dB
- IF attenuation: > 80 dB
- AM suppression: > 45 dB
Special Features
- Front input microphone
Remarks[edit]
- All models in the same series:
Pictures[edit]
- Image: Akai AA-910