Difference between revisions of "T+A Pulsar R 1260 R"

(Die Seite wurde neu angelegt: „'''Marke''': T&A '''Modell''': Pulsar R 1260 R == Technische Daten == *Vorstufe **Frequenzgang (+0 –3 dB): 0,5 Hz – 400 kHz **Fremd-/Geräuschspannungsa…“)
 
m (hat „T&A Pulsar R 1260 R“ nach „T+A Pulsar R 1260 R“ verschoben)
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
−
'''Marke''': [[T&A]]
+
'''Brand''': [[T+A]]
  
−
'''Modell''': Pulsar R 1260 R
+
'''Model''': Pulsar R 1260 R
  
−
== Technische Daten ==
+
== Technical data ==
−
*Vorstufe
+
*Preamplifier
−
**Frequenzgang (+0 –3 dB): 0,5 Hz – 400 kHz
+
Frequency response (+0 -3 dB): 0.5 Hz - 400 kHz
−
**Fremd-/Geräuschspannungsabstände
+
**Foreign/noise voltage spacing
−
**Hochpegel: 7 x 104 / 109 dB
+
**High level: 7 x 104 / 109 dB
−
**Subsonic-Filter: 14 Hz
+
**Subsonic filter: 14 Hz
−
**Klirrfaktor: < 0,001 %
+
distortion factor: &lt; 0.001
−
**Intermodulation < 0,001 %
+
Intermodulation < 0,001 %
−
**Kanaltrennung > 90 dB
+
**Kanaltrennung >90 dB
−
**Eingangsempfindlichkeit nominal
+
Input sensitivity nominal
−
***Hochpegel: 250 mV / 20 kOhm
+
***High level: 250 mV / 20 kOhm
−
***Phono MM (optional) 1 – 5 mV / 16 Kapazitäten
+
***Phono MM (optional) 1 - 5 mV / 16 capacitors
−
***Phono MC (optional) 60 – 1000 µV / 16 Kapazitäten (Phonomodul ersetzt einen HP-Eingang)
+
***Phono MC (optional) 60 - 1000 µV / 16 capacitors (Phono module replaces one HP input)
−
**Ausgänge
+
**Outputs
−
***Kopfhörer: 50 Ohm
+
***Headphones: 50 Ohm
−
***2 x Tape: 250 mV / 100 O
+
***2 x tape: 250 mV / 100 O
 
***PRE out Cinch
 
***PRE out Cinch
−
**nominal: 1 V eff
+
nominal: 1 V rms
−
**maximal 9,5 V eff
+
**maximum 9.5 V rms
−
**Impedanz: 22 Ohm
+
impedance: 22 Ohm
−
**Decoder-Schnittstelle mit Festpegel (TASI): vorhanden
+
**Decoder interface with fixed level (TASI): available
−
*Endstufe
+
*power amplifier
−
**Nennleistung pro Kanal an 8 Ohm: 100 Watt
+
**Nominal power per channel at 8 ohms: 100 watts
−
**Beide Kanäle gleichzeitig an 4 Ohm: 150 Watt
+
**Both channels simultaneously into 4 ohms: 150 watts
−
**Impulsleistung an 8 Ohm: 150 Watt
+
Pulse power into 8 ohms: 150 watts
−
**Impulsleistung an 4 Ohm: 290 Watt
+
Pulse power into 4 ohms: 290 watts
−
**Leistungsbandbreite: 1 Hz – 300 kHz
+
**Power bandwidth: 1 Hz - 300 kHz
−
**Frequenzgang +0 –3 dB: 1 Hz – 400 kHz
+
frequency response +0 -3 dB: 1 Hz - 400 kHz
−
**Anstiegsgeschwindigkeit: 60 V / µs
+
slew rate: 60 V / µs
−
**Dämpfungsfaktor: > 500
+
**Attenuation factor: &gt; 500
−
**Geräuschspannungsabstand: > 110 dB
+
**Noise floor: &gt; 110 dB
−
**Klirrfaktor: < 0,002 %
+
Distortion factor: &lt; 0,002 % **Screening: 50000 µs
−
**Siebung: 50000 µF
+
Screening: 50000 µF
 
*Tuner
 
*Tuner
−
**Empfangsbereich FM: 87,5 ... 108 MHz
+
**Reception range FM: 87.5 ... 108 MHz
−
**Empfindlichkeit (an 75 Ohm)
+
Sensitivity (at 75 Ohm)
−
***Mono, S/N = 26 dB: 0,9 µV
+
***Mono, S/N = 26 dB: 0.9 µV
−
***Stereo, S/N 0 46 dB: 28 µV
+
***stereo, S/N 0 46 dB: 28 µV
−
**Übersteuerungsfestigkeit: > 110 dB
+
Overload resistance: &gt; 110 dB
−
**Attenuator (Local, DX): dynamisch, manuell schaltbar
+
Attenuator (Local, DX): dynamic, manually switchable
−
**Tunerkreise, abgestimmt: 4 x Quarz PLL, digital
+
tuner circuits, tuned: 4 x quartz PLL, digital
−
**Selektivität, (df = 300 kHz) N/W: 80 dB / 60 dB
+
**Selectivity, (df = 300 kHz) N/W: 80 dB / 60 dB
−
**Stereoübersprechdämpfung (1 kHz): > 40 dB
+
Stereo crosstalk attenuation (1 kHz): &gt; 40 dB
−
**MPX-Filterung: 19 kHz + 38 kHz
+
**MPX filtering: 19 kHz + 38 kHz
−
**Frequenzgang (+/- 1.5 dB): 5 Hz ... 15 kHz
+
**Frequency response (+/- 1.5 dB): 5 Hz ... 15 kHz
−
**Klirrfaktor 40 kHz Hub
+
**Distortion factor 40 kHz Stroke
−
***Stereo Wide: < 0,10%
+
***Stereo Wide: &lt; 0.10%
−
***Stereo Narrow: < 0,15 %
+
***Stereo Narrow: &lt; 0.15%
−
***Mono Narrow: < 0,10%
+
***Mono Narrow: &lt; 0.10%
−
**Geräuschspannungsabstand (IEC):
+
**Noise Power Ratio (IEC):
 
***Mono: 79 dB
 
***Mono: 79 dB
 
***Stereo 72 dB
 
***Stereo 72 dB
−
**RDS-Dekoder: CENELEC EN 50067
+
RDS Decoder: CENELEC EN 50067
−
**RDS-Funktionen: Stationsname (PS Programm service)
+
**RDS functions: Station name (PS Program service)
−
*Sonstiges
+
*Other
−
**Stromzufuhr: Netzanschluss 110 V oder 230 V, 50 Hz, 300 VA
+
**Power supply: Mains connection 110 V or 230 V, 50 Hz, 300 VA
−
**Maße (HxBxT): 7,5 x 44 x 39 cm
+
Dimensions (HxWxD): 7.5 x 44 x 39 cm
−
**Gewicht: 9 kg
+
Weight: 9 kg
  
−
== Bemerkungen ==
+
== Remarks ==
−
Weitere Modelle der gleichen Serie:
+
Further models of the same series:
  
−
== Bilder ==
+
== Pictures ==
−
[[Datei:T&A Pulsar R 1260 R.jpg]]
+
[[File:T&A Pulsar R 1260 R.jpg]]
−
== Testberichte ==
+
== Reviews ==
  
 
== Links ==
 
== Links ==
  
−
[[Kategorie:Receiver]]
+
[[Category:Receiver]]
−
__NOTOC__
+
__NOTOC__</0,001>

Latest revision as of 08:03, 24 March 2014

Brand: T+A

Model: Pulsar R 1260 R

Technical data[edit]

  • Preamplifier

Frequency response (+0 -3 dB): 0.5 Hz - 400 kHz

    • Foreign/noise voltage spacing
    • High level: 7 x 104 / 109 dB
    • Subsonic filter: 14 Hz

distortion factor: < 0.001 Intermodulation < 0,001 %

    • Kanaltrennung >90 dB

Input sensitivity nominal

      • High level: 250 mV / 20 kOhm
      • Phono MM (optional) 1 - 5 mV / 16 capacitors
      • Phono MC (optional) 60 - 1000 µV / 16 capacitors (Phono module replaces one HP input)
    • Outputs
      • Headphones: 50 Ohm
      • 2 x tape: 250 mV / 100 O
      • PRE out Cinch

nominal: 1 V rms

    • maximum 9.5 V rms

impedance: 22 Ohm

    • Decoder interface with fixed level (TASI): available
  • power amplifier
    • Nominal power per channel at 8 ohms: 100 watts
    • Both channels simultaneously into 4 ohms: 150 watts

Pulse power into 8 ohms: 150 watts Pulse power into 4 ohms: 290 watts

    • Power bandwidth: 1 Hz - 300 kHz

frequency response +0 -3 dB: 1 Hz - 400 kHz slew rate: 60 V / µs

    • Attenuation factor: > 500
    • Noise floor: > 110 dB

Distortion factor: < 0,002 % **Screening: 50000 µs Screening: 50000 µF

  • Tuner
    • Reception range FM: 87.5 ... 108 MHz

Sensitivity (at 75 Ohm)

      • Mono, S/N = 26 dB: 0.9 µV
      • stereo, S/N 0 46 dB: 28 µV

Overload resistance: > 110 dB Attenuator (Local, DX): dynamic, manually switchable tuner circuits, tuned: 4 x quartz PLL, digital

    • Selectivity, (df = 300 kHz) N/W: 80 dB / 60 dB

Stereo crosstalk attenuation (1 kHz): > 40 dB

    • MPX filtering: 19 kHz + 38 kHz
    • Frequency response (+/- 1.5 dB): 5 Hz ... 15 kHz
    • Distortion factor 40 kHz Stroke
      • Stereo Wide: < 0.10%
      • Stereo Narrow: < 0.15%
      • Mono Narrow: < 0.10%
    • Noise Power Ratio (IEC):
      • Mono: 79 dB
      • Stereo 72 dB

RDS Decoder: CENELEC EN 50067

    • RDS functions: Station name (PS Program service)
  • Other
    • Power supply: Mains connection 110 V or 230 V, 50 Hz, 300 VA

Dimensions (HxWxD): 7.5 x 44 x 39 cm Weight: 9 kg

Remarks[edit]

Further models of the same series:

Pictures[edit]

T&A Pulsar R 1260 R.jpg

Reviews[edit]

Links[edit]

</0,001>

Retrieved from "https://hifi-wiki.com/index.php?title=T%2BA_Pulsar_R_1260_R&oldid=81659"