T+A Pulsar R 1260 R
Brand: T+A
Model: Pulsar R 1260 R
Technical data[edit]
- Preamplifier
Frequency response (+0 -3 dB): 0.5 Hz - 400 kHz
- Foreign/noise voltage spacing
- High level: 7 x 104 / 109 dB
- Subsonic filter: 14 Hz
distortion factor: < 0.001 Intermodulation < 0,001 %
- Kanaltrennung >90 dB
Input sensitivity nominal
- High level: 250 mV / 20 kOhm
- Phono MM (optional) 1 - 5 mV / 16 capacitors
- Phono MC (optional) 60 - 1000 µV / 16 capacitors (Phono module replaces one HP input)
- Outputs
- Headphones: 50 Ohm
- 2 x tape: 250 mV / 100 O
- PRE out Cinch
nominal: 1 V rms
- maximum 9.5 V rms
impedance: 22 Ohm
- Decoder interface with fixed level (TASI): available
- power amplifier
- Nominal power per channel at 8 ohms: 100 watts
- Both channels simultaneously into 4 ohms: 150 watts
Pulse power into 8 ohms: 150 watts Pulse power into 4 ohms: 290 watts
- Power bandwidth: 1 Hz - 300 kHz
frequency response +0 -3 dB: 1 Hz - 400 kHz slew rate: 60 V / µs
- Attenuation factor: > 500
- Noise floor: > 110 dB
Distortion factor: < 0,002 % **Screening: 50000 µs Screening: 50000 µF
- Tuner
- Reception range FM: 87.5 ... 108 MHz
Sensitivity (at 75 Ohm)
- Mono, S/N = 26 dB: 0.9 µV
- stereo, S/N 0 46 dB: 28 µV
Overload resistance: > 110 dB Attenuator (Local, DX): dynamic, manually switchable tuner circuits, tuned: 4 x quartz PLL, digital
- Selectivity, (df = 300 kHz) N/W: 80 dB / 60 dB
Stereo crosstalk attenuation (1 kHz): > 40 dB
- MPX filtering: 19 kHz + 38 kHz
- Frequency response (+/- 1.5 dB): 5 Hz ... 15 kHz
- Distortion factor 40 kHz Stroke
- Stereo Wide: < 0.10%
- Stereo Narrow: < 0.15%
- Mono Narrow: < 0.10%
- Noise Power Ratio (IEC):
- Mono: 79 dB
- Stereo 72 dB
RDS Decoder: CENELEC EN 50067
- RDS functions: Station name (PS Program service)
- Other
- Power supply: Mains connection 110 V or 230 V, 50 Hz, 300 VA
Dimensions (HxWxD): 7.5 x 44 x 39 cm Weight: 9 kg
Remarks[edit]
Further models of the same series:
Pictures[edit]
Reviews[edit]
Links[edit]
</0,001>