Difference between revisions of "Marantz PM-35"
(→Bemerkungen) |
|||
| (3 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | == | + | == General == |
| − | + | Manufacturer: [[Marantz]] | |
| − | + | Model: PM-35 | |
| − | + | Years of manufacture: ca. 1988 - 1990 | |
| − | + | Made in: Japan | |
| − | + | Colour: Black | |
| − | + | Type: Analog | |
| − | + | Remote control: No | |
| − | + | Power consumption: 135W | |
| − | + | Dimensions: (WxHxD) 420 x 100 x 260 mm | |
| − | + | Weight: 6,7 Kg | |
| − | + | Original price approx.: DM 600,- | |
| − | == | + | == Connections == |
| − | ''' | + | '''Number of inputs:''' 5 inputs |
Phono (MM): | Phono (MM): | ||
| − | + | Frequency Response (IEC RIAA): +/- 0,5dB | |
| − | Signal-to- | + | Signal-to-noise ratio (IEC A weighted): 86dB |
Input Impedance: 47 k ohms | Input Impedance: 47 k ohms | ||
Input Capacitance: 200pF | Input Capacitance: 200pF | ||
| − | Input Sensitivity: 2 | + | Input Sensitivity: 2.5mV |
| − | Equivalent Input Noise: 0 | + | Equivalent Input Noise: 0.25µV |
Phono (MC): | Phono (MC): | ||
Input Sensitivity: 250µV | Input Sensitivity: 250µV | ||
| Line 27: | Line 27: | ||
Input Impedance: 20 k ohms | Input Impedance: 20 k ohms | ||
Input Sensitivity: 150mV | Input Sensitivity: 150mV | ||
| − | ''' | + | '''Number of outputs:''' 1 output |
Tape (Line out): | Tape (Line out): | ||
Tape Out [PHONO (MM) 5.0mV 1kHz INPUT]: 300mV / 220 ohms | Tape Out [PHONO (MM) 5.0mV 1kHz INPUT]: 300mV / 220 ohms | ||
| − | == | + | == Technical data == |
| − | + | Continuous power (at distortion) | |
| − | 8 Ohm: 55W ( | + | 8 Ohm: 55W (according to DIN) |
8 Ohm: 45W (RMS) | 8 Ohm: 45W (RMS) | ||
| − | 4 Ohm: 70W ( | + | 4 Ohm: 70W (according to DIN) |
4 Ohm: 52W (RMS) | 4 Ohm: 52W (RMS) | ||
| − | + | Dynamic power | |
8 Ohm: 70W | 8 Ohm: 70W | ||
4 Ohm: 95W | 4 Ohm: 95W | ||
2 Ohm:110W | 2 Ohm:110W | ||
| − | + | Total harmonic distortion: 0,025%. | |
| − | + | Attenuation factor 8 Ohm (1 kHz): 100 | |
| − | + | Frequency response (+/-1.0 dB): 10Hz ~ 70 kHz | |
| − | + | Total dynamic range: 113dB | |
| − | + | Signal-to-noise ratio (IEC A weighted): 96dB | |
| − | + | Stereo channel separation (CD): 80dB | |
| − | + | Tone control: Treble / Bass | |
Bass:(+/- 10dB) | Bass:(+/- 10dB) | ||
| − | + | Treble:(+/- 10dB) | |
| − | Loudness: | + | Loudness: switchable |
| − | High Filter: | + | High Filter: No |
| − | Low Filter (Subsonic): | + | Low Filter (Subsonic): No |
| − | Mute: | + | Mute: No |
Direct/Line-Straight: | Direct/Line-Straight: | ||
| − | Tone defeat - | + | Tone defeat - bypasses the high/low filters for TUNER/AUX/TAPE. |
| − | Direct Line - | + | Direct Line - bypassing all filters and shortening the electrical switching paths for PHONO (MM/MC)/CD |
| − | == | + | == Special features == |
| − | == | + | == Remarks == |
| − | "Digital Monitoring Series" | + | "Digital Monitoring Series" Very fine sound - at higher levels possibly unclean bass reproduction with too large speakers. No performance bear - rather fine monitoring candidate. |
| − | + | Slightly lean tuning in the bass, fine resolution, gentle in the treble. | |
| − | == | + | == Pictures == |
| + | |||
| + | == Reviews == | ||
== Links == | == Links == | ||
| − | [[ | + | [[Category:Integrated amplifier]] |
Latest revision as of 14:45, 28 February 2012
Contents
General
Manufacturer: Marantz Model: PM-35 Years of manufacture: ca. 1988 - 1990 Made in: Japan Colour: Black Type: Analog Remote control: No Power consumption: 135W Dimensions: (WxHxD) 420 x 100 x 260 mm Weight: 6,7 Kg Original price approx.: DM 600,-
Connections
Number of inputs: 5 inputs
Phono (MM):
Frequency Response (IEC RIAA): +/- 0,5dB
Signal-to-noise ratio (IEC A weighted): 86dB
Input Impedance: 47 k ohms
Input Capacitance: 200pF
Input Sensitivity: 2.5mV
Equivalent Input Noise: 0.25µV
Phono (MC):
Input Sensitivity: 250µV
Input Impedance: 100 ohms
CD/Tuner/Tape (Line in):
Input Impedance: 20 k ohms
Input Sensitivity: 150mV
Number of outputs: 1 output
Tape (Line out):
Tape Out [PHONO (MM) 5.0mV 1kHz INPUT]: 300mV / 220 ohms
Technical data
Continuous power (at distortion)
8 Ohm: 55W (according to DIN)
8 Ohm: 45W (RMS)
4 Ohm: 70W (according to DIN)
4 Ohm: 52W (RMS)
Dynamic power
8 Ohm: 70W
4 Ohm: 95W
2 Ohm:110W
Total harmonic distortion: 0,025%.
Attenuation factor 8 Ohm (1 kHz): 100
Frequency response (+/-1.0 dB): 10Hz ~ 70 kHz
Total dynamic range: 113dB
Signal-to-noise ratio (IEC A weighted): 96dB
Stereo channel separation (CD): 80dB
Tone control: Treble / Bass
Bass:(+/- 10dB)
Treble:(+/- 10dB)
Loudness: switchable
High Filter: No
Low Filter (Subsonic): No
Mute: No
Direct/Line-Straight:
Tone defeat - bypasses the high/low filters for TUNER/AUX/TAPE.
Direct Line - bypassing all filters and shortening the electrical switching paths for PHONO (MM/MC)/CD
Special features
Remarks
"Digital Monitoring Series" Very fine sound - at higher levels possibly unclean bass reproduction with too large speakers. No performance bear - rather fine monitoring candidate.
Slightly lean tuning in the bass, fine resolution, gentle in the treble.