Difference between revisions of "Telefunken RC 200"

(Daten)
 
(3 intermediate revisions by 2 users not shown)
Line 1: Line 1:
== Daten ==
+
__NOTOC__
{{Navigation}}
+
== Data ==
'''Allgemein'''
+
{{navigation}}
* Hersteller: Telefunken
+
'''General'''
* Modell: RC 200
+
* Manufacturer: [[Telefunken]]
* Typ: Stereo, Einzel
+
* Model: RC 200
* Baujahre: 1981 - 1983
+
* Type: Cassette Tape Deck
* Hergestellt in:
+
* Years of manufacture: 1981 - 1983
* Farbe: silber
+
* Made in: Germany
* Fernbedienung: nein
+
* Color: Silver
* Leistungsaufnahme:
+
* Remote control: no
* Abmessungen: 435 x 111 x 275 mm (B x H x T)
+
* Power consumption:
* Gewicht: 6,0 kg
+
* Dimensions: 435 x 111 x 275 mm (WxHxD).
* Neupreis ca.: 750,- DM
+
* Weight: 6.0 kg
 +
* Original price approx.: 599 DM
  
  
'''Anschlüsse'''
+
'''Connections'''
* Anzahl der Eingänge:
+
* Number of inputs:
** Radio: 5poliger DIN-Stecker (Pole im Halbkreis)
+
** Radio: 5pin DIN plug (poles in a semicircle).
** Line In: Cinch
+
Line In: Cinch
** Aux/Mikrofon: 5poliger DIN-Stecker (Pole im Würfel)
+
Aux/Microphone: 5pin DIN plug (poles in cube)
* Anzahl der Ausgänge:
+
* Number of outputs:
 
** Line Out: Cinch
 
** Line Out: Cinch
** Kopfhörer: 6,3 mm Klinke
+
** Headphones: 6.3 mm jack
  
  
'''Technische Daten'''
+
'''Technical Data'''
* Tonköpfe: 2
+
* Audio heads: 2
* Motoren: 2
+
* Motors: 2
* Gleichlaufschwankungen:
+
* Synchronous variations:
* Bandarten: Fe<sub>2</sub>O<sub>3</sub>-, CrO<sub>2</sub>-, FeCr- und Metal-(= Metallpigment-)Bänder auf Kompaktkassetten
+
* Tape types: Fe2O3, CrO2, FeCr and metal (= metal pigment) tapes on compact cassettes.
* Frequenzgang: 30 - 20.000 Hz (für alle Bandsorten)
+
* Frequency response: 30 - 20,000 Hz (for all tape types)
* Klirrfaktor: jeweils bei 10 kHz gemessen:
+
* Distortion factor: measured at 10 kHz in each case:
** Fe<sub>2</sub>O<sub>3</sub>/FeCr: &#8805; 1 %
+
** Fe2O3/FeCr: 1 %
** CrO<sub>2</sub>: &#8805; 3 %
+
CrO2: 3 %
** Metal: &#8805; 2 %
+
Metal: 2 %
* Signalrauschabstand: jeweils mit Rauschuntersdrückungssystem "High Com" gemessen:
+
* Signal-to-noise ratio: each measured with noise suppression system "High Com":
** Fe<sub>2</sub>O<sub>3</sub>: &#8805; 74 dB
+
** Fe2O3: 74 dB
** FeCr: &#8805; 75 dB
+
FeCr: 75 dB
** CrO<sub>2</sub>: &#8805; 78 dB
+
CrO2: 78 dB
** Metal: &#8805; 77 dB
+
Metal: 77 dB
* Auto-Reverse: nein
+
* Auto Reverse: no
* Titelsuchlauf: nein
+
* Title search: no
* Dolby: nein, stattdessen "High Com", zum Abspielen von Dolby Cassetten kann der "High-Com" Schalter auf quasi "Dolby" umgeschaltet werden, so dass die Cassetten auch gehörrichtig gehört werden können. Es ist aber kein lizensiertes Dolby, sondern eine Eigenentwicklung von Telefunken.
+
* Dolby: no, instead "High Com", for playing Dolby cassettes the "High-Com" switch can be switched to quasi "Dolby", so that the cassettes can be heard aurally correct. However, it's not a licensed Dolby, but a proprietary development by Telefunken.
* MPX-Filter: ja
+
MPX filter: yes
 
* Fader:
 
* Fader:
* Pitch-Kontrolle: nein
+
* Pitch control: no
* CD-Synchro-Aufnahme: neim
+
* CD synchro recording: neim
  
  
'''Besondere Ausstattungen'''
+
'''Special Features'''
* es gibt keine "klassisches" Cassettenfachabdeckung. Wenn die Cassette herausgenommen wird, berühren die Finger links und rechts von der Cassette bewegliche Schaltabdeckungen und lösen so einen Cassettenstop aus.
+
* There is no "classic" cassette compartment cover. When the cassette is removed, fingers touch movable switch covers to the left and right of the cassette, triggering a cassette stop.
* Die Laufwerksfunktionen (Heben bzw. Senken der Mechanik) werden durch einen Magneten vorgenommen. Somit wird die Mechanik nicht langsam bewegt, sondern "schlagartig" bewegt. Dieses ergibt ein sehr vernehmliches "Anschlagsgeräusch".
+
The drive functions (raising or lowering the mechanism) are performed by a magnet. Thus the mechanism is not moved slowly, but "abruptly". This results in a very audible "impact noise".
  
== Bemerkungen ==
 
Weitere Modelle der gleichen Serie:
 
  
== Bilder ==
+
== Remarks ==
 +
* Other models of the same series:
 +
* [[Telefunken RC 100]]
 +
* [[Telefunken RC 200]]
 +
* [[Telefunken RC 300]]
  
[[bild:Telefunken1_Cassettendeck_RC_200.jpg]]
 
  
 +
== Pictures ==
 +
* Picture: Telefunken RC 200
 +
[[image:Telefunken1_Cassette_deck_RC_200.jpg]]
  
[[bild:Telefunken2_Cassettendeck_RC_200.jpg]]
 
  
== Berichte ==
+
* Picture: Telefunken RC 200
 +
[[image:Telefunken2_Cassette_deck_RC_200.jpg]]
 +
 
 +
 
 +
== Reports ==
 +
 
  
 
== Links ==
 
== Links ==
[[Kategorie:Kassettenrecorder]]
+
 
 +
 
 +
[[Category:Cassette decks]]

Latest revision as of 00:25, 5 June 2020

Data[edit]

General

  • Manufacturer: Telefunken
  • Model: RC 200
  • Type: Cassette Tape Deck
  • Years of manufacture: 1981 - 1983
  • Made in: Germany
  • Color: Silver
  • Remote control: no
  • Power consumption:
  • Dimensions: 435 x 111 x 275 mm (WxHxD).
  • Weight: 6.0 kg
  • Original price approx.: 599 DM


Connections

  • Number of inputs:
    • Radio: 5pin DIN plug (poles in a semicircle).

Line In: Cinch Aux/Microphone: 5pin DIN plug (poles in cube)

  • Number of outputs:
    • Line Out: Cinch
    • Headphones: 6.3 mm jack


Technical Data

  • Audio heads: 2
  • Motors: 2
  • Synchronous variations:
  • Tape types: Fe2O3, CrO2, FeCr and metal (= metal pigment) tapes on compact cassettes.
  • Frequency response: 30 - 20,000 Hz (for all tape types)
  • Distortion factor: measured at 10 kHz in each case:
    • Fe2O3/FeCr: ≥ 1 %

CrO2: ≥ 3 % Metal: ≥ 2 %

  • Signal-to-noise ratio: each measured with noise suppression system "High Com":
    • Fe2O3: ≥ 74 dB

FeCr: ≥ 75 dB CrO2: ≥ 78 dB Metal: ≥ 77 dB

  • Auto Reverse: no
  • Title search: no
  • Dolby: no, instead "High Com", for playing Dolby cassettes the "High-Com" switch can be switched to quasi "Dolby", so that the cassettes can be heard aurally correct. However, it's not a licensed Dolby, but a proprietary development by Telefunken.

MPX filter: yes

  • Fader:
  • Pitch control: no
  • CD synchro recording: neim


Special Features

  • There is no "classic" cassette compartment cover. When the cassette is removed, fingers touch movable switch covers to the left and right of the cassette, triggering a cassette stop.

The drive functions (raising or lowering the mechanism) are performed by a magnet. Thus the mechanism is not moved slowly, but "abruptly". This results in a very audible "impact noise".


Remarks[edit]


Pictures[edit]

  • Picture: Telefunken RC 200

File:Telefunken1 Cassette deck RC 200.jpg


  • Picture: Telefunken RC 200

File:Telefunken2 Cassette deck RC 200.jpg


Reports[edit]

Links[edit]