Difference between revisions of "Hitachi HCA-8300"
(→Erster Eintrag des Gerätes) |
|||
(5 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Hitachi]] |
− | * | + | * Model: HCA-8300 |
− | * | + | * Type: Preamplifier |
− | * | + | * Years of manufacture: 1976 - 1979 |
− | * | + | * Made in: Japan |
− | * | + | * Color: Black |
− | * | + | * Remote control: no |
− | + | * Power consumption: 9.5W (120V~), 11W (220 - 250V~) | |
− | * | + | * Dimensions: 435 (W) x 152 (H) x 308 (D) mm |
− | * | + | * Weight: 7 kg |
− | * | + | * Original price approx.: 60,000 Yen (Japan, 1976), 1'000 DM |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: 7 |
** PHONO 1: 2 mV - 6 mV (50 kOhm) | ** PHONO 1: 2 mV - 6 mV (50 kOhm) | ||
** PHONO 2: 2 mV (50 kOhm) | ** PHONO 2: 2 mV (50 kOhm) | ||
** TUNER, AUX 1, AUX 2: 100 mV (50 kOhm) | ** TUNER, AUX 1, AUX 2: 100 mV (50 kOhm) | ||
** TAPE 1, Tape2: 100 mV (50 kOhm) | ** TAPE 1, Tape2: 100 mV (50 kOhm) | ||
− | * | + | * Number of outputs: |
** PRE OUT: 1 V (6000hm) | ** PRE OUT: 1 V (6000hm) | ||
** TAPE REC OUT: 100 mV (600 Ohm) | ** TAPE REC OUT: 100 mV (600 Ohm) | ||
Line 28: | Line 28: | ||
** PHONES OUT: 70 mV (90 Ohm) | ** PHONES OUT: 70 mV (90 Ohm) | ||
− | ''' | + | |
− | * | + | '''Specifications''' |
− | ** PHONO 1, PHONO 2 (RIAA): 20-20000 Hz (±0 | + | * Frequency response: |
− | ** TUNER, AUX 1, AUX 2: 5- 100000 Hz (+0 / -1 | + | ** PHONO 1, PHONO 2 (RIAA): 20-20000 Hz (±0.2 dB). |
− | + | ** TUNER, AUX 1, AUX 2: 5- 100000 Hz (+0 / -1.5 dB) | |
+ | Distortion factor: | ||
** PHONO 1, PHONO 2: | ** PHONO 1, PHONO 2: | ||
− | *** | + | *** Less than 0.005% at REC OUT level 1 V |
− | *** | + | *** Less than 0.01% at REC OUT level 20 V |
** TUNER, AUX 1, AUX 2: | ** TUNER, AUX 1, AUX 2: | ||
− | *** | + | *** Less than 0.005% at PRE OUT level 1 V |
− | *** | + | *** Less than 0.01% at PRE OUT level 7 V |
− | + | Signal-to-noise ratio: | |
− | ** PHONO 1, PHONO 2: 75 dB ( | + | ** PHONO 1, PHONO 2: 75 dB (input level 2 mV) |
− | ** TUNER, AUX 1, AUX 2: 100 dB ( | + | ** TUNER, AUX 1, AUX 2: 100 dB (input level 100 mV) |
− | ** TAPE 1, TAPE 2: 100 dB ( | + | ** TAPE 1, TAPE 2: 100 dB (input level 100 mV) |
− | * | + | * Stereo channel separation: |
− | * | + | * Tone control: |
− | ** Bass: ±10 dB (50 Hz, 100 Hz | + | ** Bass: ±10 dB (50 Hz, 100 Hz transition at 150 Hz, 300 Hz). |
− | + | Treble: ±10 dB (10 kHz, 20 kHz transition at 3 kHz, 6 kHz) | |
− | + | Loudness: (when volume control is set to -30dB) | |
** +8 dB (100 Hz) | ** +8 dB (100 Hz) | ||
− | + | +4 dB (10 kHz) | |
− | * High Filter: 8 kHz (6 dB/ | + | * High Filter: 8 kHz (6 dB/oct.) |
− | * Low Filter (Subsonic): 20 Hz (12 dB/ | + | * Low Filter (Subsonic): 20 Hz (12 dB/oct.) |
− | * Mute: | + | * Mute: automatic |
− | * Direct/Line-Straight: | + | * Direct/Line-Straight: yes, "Tone defeat |
+ | |||
+ | |||
+ | '''Special Features''' | ||
+ | * From the Service Manual: | ||
+ | ** ICL equalization circuit for Hi-Fi record playback. | ||
+ | ** RIAA elements with a tolerance of +/-1%. | ||
+ | ** Low distortion and low noise tone control circuitry | ||
+ | ** Tone control for each KAnal with new tone control circuitry | ||
+ | Rumble filter that flawlessly suppresses whine and ultra-low-frequency rumble without degrading sound quality | ||
+ | ** Headphone amplifier circuitry for quick and easy monitoring control | ||
+ | ** New quad volume control with 32 contact tips for accurate volume control and wide noise margin | ||
+ | ** Three independent gain selector switches with addition for extended fine adjustment range | ||
+ | ** Phono 1 level control with fine adjustment | ||
+ | ** Built-in muting circuit with reed relay | ||
+ | |||
+ | |||
+ | == Remarks == | ||
+ | * Other models in the same series: | ||
+ | * Preamplifier: | ||
+ | * [[Hitachi HCA-8300]] | ||
+ | |||
+ | |||
+ | * Power amplifier: | ||
+ | * [[Hitachi HMA-8300]] | ||
+ | |||
+ | |||
+ | == Pictures == | ||
+ | * Image: Hitachi HCA-8300 | ||
+ | [[image:Hitachi HCA-8300 Preamp Front View.jpg]] | ||
+ | |||
+ | * Image: Hitachi HCA-8300 | ||
+ | [[image:Hitachi HCA-8300 Preamp Rear Top View.jpg]] | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | + | * Excerpt from brochure: Hitachi HCA-8300, HMA-8300 | |
− | + | [[File:Hitachi HCA-HMA-8300-Prospekt-1.jpg]] | |
− | |||
− | == | + | == Reports == |
+ | |||
== Links == | == Links == | ||
− | [[ | + | |
+ | [[Category:Preamplifier]] |
Latest revision as of 07:20, 5 September 2019
Data[edit]
General
- Manufacturer: Hitachi
- Model: HCA-8300
- Type: Preamplifier
- Years of manufacture: 1976 - 1979
- Made in: Japan
- Color: Black
- Remote control: no
- Power consumption: 9.5W (120V~), 11W (220 - 250V~)
- Dimensions: 435 (W) x 152 (H) x 308 (D) mm
- Weight: 7 kg
- Original price approx.: 60,000 Yen (Japan, 1976), 1'000 DM
Connections
- Number of inputs: 7
- PHONO 1: 2 mV - 6 mV (50 kOhm)
- PHONO 2: 2 mV (50 kOhm)
- TUNER, AUX 1, AUX 2: 100 mV (50 kOhm)
- TAPE 1, Tape2: 100 mV (50 kOhm)
- Number of outputs:
- PRE OUT: 1 V (6000hm)
- TAPE REC OUT: 100 mV (600 Ohm)
- TAPE REC OUT (DIN): 40 mV (80 kOhm)
- PHONES OUT: 70 mV (90 Ohm)
Specifications
- Frequency response:
- PHONO 1, PHONO 2 (RIAA): 20-20000 Hz (±0.2 dB).
- TUNER, AUX 1, AUX 2: 5- 100000 Hz (+0 / -1.5 dB)
Distortion factor:
- PHONO 1, PHONO 2:
- Less than 0.005% at REC OUT level 1 V
- Less than 0.01% at REC OUT level 20 V
- TUNER, AUX 1, AUX 2:
- Less than 0.005% at PRE OUT level 1 V
- Less than 0.01% at PRE OUT level 7 V
- PHONO 1, PHONO 2:
Signal-to-noise ratio:
- PHONO 1, PHONO 2: 75 dB (input level 2 mV)
- TUNER, AUX 1, AUX 2: 100 dB (input level 100 mV)
- TAPE 1, TAPE 2: 100 dB (input level 100 mV)
- Stereo channel separation:
- Tone control:
- Bass: ±10 dB (50 Hz, 100 Hz transition at 150 Hz, 300 Hz).
Treble: ±10 dB (10 kHz, 20 kHz transition at 3 kHz, 6 kHz) Loudness: (when volume control is set to -30dB)
- +8 dB (100 Hz)
+4 dB (10 kHz)
- High Filter: 8 kHz (6 dB/oct.)
- Low Filter (Subsonic): 20 Hz (12 dB/oct.)
- Mute: automatic
- Direct/Line-Straight: yes, "Tone defeat
Special Features
- From the Service Manual:
- ICL equalization circuit for Hi-Fi record playback.
- RIAA elements with a tolerance of +/-1%.
- Low distortion and low noise tone control circuitry
- Tone control for each KAnal with new tone control circuitry
Rumble filter that flawlessly suppresses whine and ultra-low-frequency rumble without degrading sound quality
- Headphone amplifier circuitry for quick and easy monitoring control
- New quad volume control with 32 contact tips for accurate volume control and wide noise margin
- Three independent gain selector switches with addition for extended fine adjustment range
- Phono 1 level control with fine adjustment
- Built-in muting circuit with reed relay
Remarks[edit]
- Other models in the same series:
- Preamplifier:
- Hitachi HCA-8300
- Power amplifier:
- Hitachi HMA-8300
Pictures[edit]
- Image: Hitachi HCA-8300
- Image: Hitachi HCA-8300
- Excerpt from brochure: Hitachi HCA-8300, HMA-8300