Difference between revisions of "Rotel RX-400 A"

 
 
(11 intermediate revisions by 3 users not shown)
Line 1: Line 1:
−
Receiver;
+
__NOTOC__
−
Verstärkerteil: 2x 20Watt Sinus an 4 Ohm (2x 15 Watt an 8 Ohm)
+
== Data ==
−
2x 30Watt Musik an 4 Ohm (2x 20 Watt an 8 Ohm)
+
{{navigation}}
−
0,6% Klirrfaktor bei Nennleistung
+
'''General'''
−
Frequenzbereich: 15-50.000 Hz, -1,5dB
+
* Manufacturer: [[Rotel]]
−
Leistungsbandbreite: 25-30.000 Hz
+
* Model: RX-400 A
−
Klirrfaaktor (DIN): 0,5%
+
* Type: Receiver
−
IM-Verzerrungen: 0,4%
+
* Years of manufacture: 1973 - 1976
−
Fremdspannungsabstand: 70dB
+
* Made in: Japan
−
Dämpfungsfaktor an 8Ohm: 30
+
* Color: Silver, wooden cabinet
−
Empfangsteil:
+
* Remote control: no
−
ausgestattet mit FET und keramischem Filter
+
* Power consumption:
−
FM-Tuner:
+
* Dimensions (WxHxD): 425 x 135 x 330 mm.
−
Abstimmbereich: 87,5-108 MHz
+
* Weight: 7.1 kg
−
Empfindlichkeit: 2,2µV bei 30dB Rauschabstand
+
* Original price approx.: 845 DM
−
Störabstand: >60dB
+
 
−
Trennschärfe: >40dB
+
 
−
Klirrfaktor: <1%
+
'''Connections'''
−
AM-Tuner:
+
* Number of inputs:
−
Abstimmbereich: 535-1650 kHz
+
** Phono MM: 2 mV, 50 kOhm.
−
Empfindlichkeit: 30µV
+
Aux: 150 mV, 50 kOhm, max. 15 V
−
Trennschärfe: >25dB
+
Tape Play: 150 mV, 50 kOhm, max. 15 V
−
Ausstattung:
+
Main In: 1.5 V, 50 kOhm
−
Eingänge: Phone, TB, Aux
+
** Antenna VHF (75/300 Ohm), MW (300 Ohm)
−
Konturtaste: loudness
+
* Number of outputs:
−
Monitortaste: Hinterbandkontrolle
+
** Tape Rec: 350 mV, 3.3 kOhm
−
Bässe u. Höhen: für beide Kanäle getrennt regelbar
+
** Tape Rec DIN: 120 mV, 90 kOhm
−
Lautsprecheranschlüsse: A, B, A+B
+
** Pre Out:
−
Kopfhöreranschluss: vorne, 6,3 mm Klinke
+
** Headphones:
−
Sonstiges:
+
** 2 pairs of speakers
−
Vor- und Endverstärker trennbar (Cinch)
+
 
−
1 geschalteter Netzausgang
+
 
 +
'''Technical Specifications'''
 +
 
 +
''Amplifier''
 +
* Continuous power (at distortion)
 +
** 8 Ohm: 2x 15 Watt (20 Hz - 20'000 Hz)
 +
** 4 Ohm: 2x 20 Watt (1 kHz)
 +
* Dynamic power
 +
** 8 Ohm: 2x 20 Watt
 +
** 4 Ohm: 2x 30 Watt
 +
* Frequency response: 15 Hz - 50 kHz
 +
* Distortion factor: &lt; 0.6
 +
* Attenuation factor: 30 at 8 Ohm
 +
* Signal-to-noise ratio:
 +
** Phono MM: 70 dB
 +
High level: 90 dB
 +
* Tone control
 +
Bass: ± 10 dB at 100 Hz
 +
Treble: ± 10 dB at 10 kHz
 +
* Loudness: + 10 dB at 100 Hz / + 3 dB at 10 kHz
 +
* High Filter:  
 +
* Low Filter (Subsonic):  
 +
* Muting:  
 +
 
 +
 
 +
''Tuner''
 +
* Reception: FM, MW
 +
* Frequencies:  
 +
** FM: 87 - 108 MHz
 +
MW: 525 - 1'605 kHz
 +
* Frequency response: 30 - 15'000 Hz, ± 0,5 dB
 +
* Input sensitivity: 2.2 µV (IHF)
 +
* Distortion factor: < 1 %
 +
* Signalrauschabstand:
 +
** Mono: 60 dB
 +
** Stereo: 55 dB
 +
* Kanaltrennung: 35 dB
 +
* Trennschärfe: 40 dB
 +
* Gleichwellenselektion: 1,5 dB
 +
* Nebenwellenselektion: >90 dB
 +
* Image frequency attenuation: &gt; 100 dB
 +
* IF attenuation: &gt; 100 dB (at 98 MHz)
 +
* AM suppression: 60 dB
 +
 
 +
 
 +
'''Special Features'''
 +
* Monitor button
 +
 
 +
 
 +
== Remarks ==
 +
* Other receivers in the same series:
 +
** [[Rotel RX-154 A]]
 +
** [[Rotel RX-400 A]]
 +
** [[Rotel RX-600 A]]
 +
** [[Rotel RX-800]]
 +
 
 +
 
 +
* Amplifiers of the same series:
 +
** [[Rotel RA-1210]]
 +
 
 +
 
 +
* Tuners of the same series:
 +
** [[Rotel RT-1220]]
 +
 
 +
 
 +
* Headphones of the same series:
 +
** [[Rotel RH 430]]
 +
** [[Rotel RH 630]]
 +
** [[Rotel RH 700]]
 +
 
 +
 
 +
== Pictures ==
 +
* Extract from brochure: Rotel RX-400 A
 +
[[File:Rotel RX-400 A-Prospekt-1.jpg]]
 +
 
 +
 
 +
* Picture: Rotel RX-400 A
 +
[[File:Rotel RX-400 A.jpg]]
 +
 
 +
 
 +
== Reports ==
 +
 
 +
 
 +
== Links ==
 +
 
 +
 
 +
[[Category:Receiver]]</1>

Latest revision as of 01:17, 10 December 2019

Data[edit]

General

  • Manufacturer: Rotel
  • Model: RX-400 A
  • Type: Receiver
  • Years of manufacture: 1973 - 1976
  • Made in: Japan
  • Color: Silver, wooden cabinet
  • Remote control: no
  • Power consumption:
  • Dimensions (WxHxD): 425 x 135 x 330 mm.
  • Weight: 7.1 kg
  • Original price approx.: 845 DM


Connections

  • Number of inputs:
    • Phono MM: 2 mV, 50 kOhm.

Aux: 150 mV, 50 kOhm, max. 15 V Tape Play: 150 mV, 50 kOhm, max. 15 V Main In: 1.5 V, 50 kOhm

    • Antenna VHF (75/300 Ohm), MW (300 Ohm)
  • Number of outputs:
    • Tape Rec: 350 mV, 3.3 kOhm
    • Tape Rec DIN: 120 mV, 90 kOhm
    • Pre Out:
    • Headphones:
    • 2 pairs of speakers


Technical Specifications

Amplifier

  • Continuous power (at distortion)
    • 8 Ohm: 2x 15 Watt (20 Hz - 20'000 Hz)
    • 4 Ohm: 2x 20 Watt (1 kHz)
  • Dynamic power
    • 8 Ohm: 2x 20 Watt
    • 4 Ohm: 2x 30 Watt
  • Frequency response: 15 Hz - 50 kHz
  • Distortion factor: < 0.6
  • Attenuation factor: 30 at 8 Ohm
  • Signal-to-noise ratio:
    • Phono MM: 70 dB

High level: 90 dB

  • Tone control

Bass: ± 10 dB at 100 Hz Treble: ± 10 dB at 10 kHz

  • Loudness: + 10 dB at 100 Hz / + 3 dB at 10 kHz
  • High Filter:
  • Low Filter (Subsonic):
  • Muting:


Tuner

  • Reception: FM, MW
  • Frequencies:
    • FM: 87 - 108 MHz

MW: 525 - 1'605 kHz

  • Frequency response: 30 - 15'000 Hz, ± 0,5 dB
  • Input sensitivity: 2.2 µV (IHF)
  • Distortion factor: < 1 %
  • Signalrauschabstand:
    • Mono: 60 dB
    • Stereo: 55 dB
  • Kanaltrennung: 35 dB
  • Trennschärfe: 40 dB
  • Gleichwellenselektion: 1,5 dB
  • Nebenwellenselektion: >90 dB
  • Image frequency attenuation: > 100 dB
  • IF attenuation: > 100 dB (at 98 MHz)
  • AM suppression: 60 dB


Special Features

  • Monitor button


Remarks[edit]





Pictures[edit]

  • Extract from brochure: Rotel RX-400 A

Rotel RX-400 A-Prospekt-1.jpg


  • Picture: Rotel RX-400 A

Rotel RX-400 A.jpg


Reports[edit]

Links[edit]

</1>

Retrieved from "https://hifi-wiki.com/index.php?title=Rotel_RX-400_A&oldid=207527"