Difference between revisions of "Aitos EV 901"
Black CAT II (talk | contribs) |
Black CAT II (talk | contribs) |
||
| (3 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| − | {{ | + | {{Takes work}} |
| − | == | + | == Data per monoblock== |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: Aitos |
| − | * | + | * Model: EV 901 |
| − | * | + | * Type: [[OTL]]-tube monos |
| − | * | + | * Years of manufacture: from about 1988 until now |
| − | * | + | * Manufactured in: Netherlands |
| − | * | + | * Colour: Black |
| − | * | + | * Type: Analog |
| − | * | + | * Remote control: No |
| − | * | + | * Power Consumption: |
| − | ** | + | ** Idle: 130W |
| − | ** | + | ** Full power: 500W |
| − | * | + | * Dimensions (WxHxD): 50cm x 20cm x 42cm |
| − | * | + | * Weight: 19kg |
| − | * | + | * New price approx.: 13950€ per pair |
| − | ''' | + | '''Connections''' |
| − | * | + | * Number of inputs: 1 |
| − | + | Chinch gold plated: 270kOhm 1,5V eff. | |
| − | * | + | * Number of outputs: 2 (parallel) |
| − | ** LS-Stereo A: 4 | + | ** LS-Stereo A: 4 to 12 Ohm automatic adjustment |
| − | ** LS-Stereo B: 4 | + | ** LS-Stereo B: 4 to 12 Ohm automatic adjustment |
| − | ''' | + | '''Technical Data''' |
| − | * | + | * Continuous power (at distortion factor) |
** 10 Ohm: 160W | ** 10 Ohm: 160W | ||
| − | * | + | * Dynamic power |
** 8 Ohm: | ** 8 Ohm: | ||
** 4 Ohm: | ** 4 Ohm: | ||
| − | * | + | * Total harmonic distortion: <0,25% |
* Dämpfungsfaktor: >150 | * Dämpfungsfaktor: >150 | ||
| − | * | + | * Frequency response: 8Hz - 225kHz -3db |
| − | * | + | * Signal to noise ratio: >100 db |
| − | * | + | * Stereo channel separation: Dependent on preamplifier |
| − | ''' | + | '''Special features of tube amplifiers''' |
| − | * | + | * Principle: [[OTL]]-tube power amplifier |
| − | * | + | * Tube equipment |
| − | + | 6 power tubes | |
| − | + | 3 double triodes | |
| − | + | 1 pentode | |
| − | * | + | * Transformers: 3 |
| − | ** | + | ** High voltage |
| − | ** | + | ** Auxiliary voltage/heating |
| − | ** | + | ** Switch-on electronics |
| − | ''' | + | '''Special Equipment''' |
| − | * | + | * Diagnostic socket (service) for checking internal voltages. |
| − | * | + | * Input connector for switching the power amplifier on and off via AITOS tube preamplifiers |
| − | * Led | + | * Led indicators for remote control and fuse fault indication |
| − | * | + | * Built-in mains phase control. |
| − | * | + | * Three-dimensional wiring |
| − | * | + | * Delay of the anode voltage at power up |
| − | * | + | * Built-in hour meter |
| − | == | + | == Remarks == |
| − | + | Other models in the same series: | |
| − | == | + | == Pictures == |
| − | [[ | + | [[Image:AitosEV901Front.jpg]] |
| + | [[Image:AitosEV901Rear.jpg]] | ||
| − | == | + | == Reports == |
== Links == | == Links == | ||
| − | [http://www.aitos-audio.com/ Aitos Homepage] | + | [[http://www.aitos-audio.com/ Aitos Homepage]] |
| − | [[ | + | [[Category:Power Amplifiers]]</0,25%> |
Latest revision as of 14:44, 7 June 2009
Data per monoblock[edit]
General
- Manufacturer: Aitos
- Model: EV 901
- Type: OTL-tube monos
- Years of manufacture: from about 1988 until now
- Manufactured in: Netherlands
- Colour: Black
- Type: Analog
- Remote control: No
- Power Consumption:
- Idle: 130W
- Full power: 500W
- Dimensions (WxHxD): 50cm x 20cm x 42cm
- Weight: 19kg
- New price approx.: 13950€ per pair
Connections
- Number of inputs: 1
Chinch gold plated: 270kOhm 1,5V eff.
- Number of outputs: 2 (parallel)
- LS-Stereo A: 4 to 12 Ohm automatic adjustment
- LS-Stereo B: 4 to 12 Ohm automatic adjustment
Technical Data
- Continuous power (at distortion factor)
- 10 Ohm: 160W
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: <0,25%
- Dämpfungsfaktor: >150
- Frequency response: 8Hz - 225kHz -3db
- Signal to noise ratio: >100 db
- Stereo channel separation: Dependent on preamplifier
Special features of tube amplifiers
- Principle: OTL-tube power amplifier
- Tube equipment
6 power tubes 3 double triodes 1 pentode
- Transformers: 3
- High voltage
- Auxiliary voltage/heating
- Switch-on electronics
Special Equipment
- Diagnostic socket (service) for checking internal voltages.
- Input connector for switching the power amplifier on and off via AITOS tube preamplifiers
- Led indicators for remote control and fuse fault indication
- Built-in mains phase control.
- Three-dimensional wiring
- Delay of the anode voltage at power up
- Built-in hour meter
Remarks[edit]
Other models in the same series:
Pictures[edit]
File:AitosEV901Front.jpg File:AitosEV901Rear.jpg
Reports[edit]
Links[edit]
[Aitos Homepage]</0,25%>